Take the Admore Large LED Light Bar, apply steroids and this is what you get. A 10.75-inch long high power/low current light bar with running, brake, turn and hazard functionality.
Constructed of 72 high-intensity bi-color LEDs in four clusters. Housed in a black polycarbonate case with a smoked lens.
Provides:
- Red tail light (50% intensity)
- Red brake light (maximum intensity)
- Yellow turn signals
- Hazard functionality - where the bike is pre-wired for this functionality
When you brake, a built-in brake light modulator will make the light bar flash 3 times before maintaining a 100% intensity red. This helps to alert drivers behind that you are slowing down or stopping.
The turn signal progressively scrolls from the center outwards to help draw attention.
Approx. size: 10-3/4" across x 1-5/8" tall x 1" thick (27cm x 3.6cm x 2.5cm)
AdMore simplifies installation by providing Posi-Tap™ electrical connectors. Posi-Taps™ allow you to wire the light bar to your original wiring harness without tools - no stripping, crimping, or soldering required!
The kit includes mounting hardware including nuts and bolts to attach the light bar directly to a license plate or any flat surface, warranty information and wiring ins
- Review by Rick
-
Mounting creativity will be needed and the wireing will need to be figured out for your model. However, this product is well built. I have been through a couple of strong rain storms with it and I continues to work perfectly. It is one of the brightest ad on light sets I have seen. (Posted on 5/10/13)Rating - Review by Chris
-
Great look but you really need to be individually creative about how and where you want to mount this on your bike. Also you need to know the exact color wires that you need to posi-tap into and where on your model. The instructions are generic. If you can find the other information from your favorite bike forum, you'll be fine. Makes the bike that much more visible, especially with all my side luggage on. (Posted on 1/17/13)Rating
