This Admore LED Lighting Kit is not compatible with the R1200GS LC.
Take the Admore Large LED Light Bar, apply steroids and this is what you get. A 10.75-inch long high power/low current light bar with running, brake, turn and hazard functionality.
Constructed of 72 high-intensity bi-color LEDs in four clusters. Housed in a black polycarbonate case with a smoked lens.
- Red tail light (50% intensity)
- Red brake light (maximum intensity)
- Yellow turn signals
- Hazard functionality - where the bike is pre-wired for this functionality
When you brake, a built-in brake light modulator will make the light bar flash 3 times before maintaining a 100% intensity red. This helps to alert drivers behind that you are slowing down or stopping.
The turn signal progressively scrolls from the center outwards to help draw attention.
Approx. size: 10-3/4" across x 1-5/8" tall x 1" thick (27cm x 3.6cm x 2.5cm)
AdMore simplifies installation by providing Posi-Tap electrical connectors. Posi-Taps allow you to wire the light bar to your original wiring harness without tools - no stripping, crimping, or soldering required!
The kit includes mounting hardware including nuts and bolts to attach the light bar directly to a license plate or any flat surface, warranty information and wiring ins
- Review by Scott
- Review by Scott
The light comes with everything you need, although the instructions are a one-page piece of paper, printed on one side. I struggled with the wiring for an hour or so and got tired and called Admore. They were incredibly helpful and had the lighting schematic for my bike on hand. They went through the color pairing combinations and it took me about ten minutes after that to hook the whole thing up. Probably could have called Twisted as well but didn't think about it. Anyway, great support and good product. (Posted on 9/6/13)
- Review by Rick
- Review by Chris