Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

Barkbusters Storm Lever & Weather Protection Handguards for Select BMW & Triumph Motorcycles


In stock


Maximum wind and rain protection for street and adventure-touring bikes!

Fits the following motorcycles:

  • BMW F650GS '08-'12
  • BMW F800GS '08-'12
  • BMW HP2 Megamoto '07-'09
  • BMW R1200GS Adventure '05-'13
  • BMW R1200GS '04-'12
  • Triumph Tiger 1050 Sport '16

Storm handguards have an aerodynamic design and a larger profile that wraps around the hands to offer excellent wind and weather protection. The wide profile is great for street riding and open trails. Storm Full-Wrap Backbone with two mounting points, this is the strongest backbone available, and is recommended for dual-sport and adventure touring bikes. For a detailed review and installation how-to, read this article on

Barkbusters handguards were first manufactured in 1984 and now have over 28 years of motorcycle industry experience and riding enthusiasm. That history means Barkbusters has what it takes to produce the finest handguards available on the market today. Barkbusters integrates a hardened aluminum backbone with a stylish, replaceable plastic guard to create a truly functional handguard. No more busted levers or knuckles! In the unlikely event that you break a part of the handguard, every piece is replaceable.

Check our Barkbusters Handguards Application Chart for a complete guide to the specific fit for your motorcycle.

Please Note:

BB.BHG32.SBK IS NOT compatible with Wunderlich throttle lock.

BB.BHG32.SBK IS compatible with Kaoko KAO.KBB700-S throttle lock.


Handguard Comparison & Overview Video

Barkbusters Handguard Comparison Video

Customer Reviews
Review by prototypecycle
I purchased SKU# BB.BHG32.SBK to fit my 2009 R1200GS Adv. In addition, I also purchased the Handlebar-End Weights, SKU# BB.B66. This was all done in an effort to protect my hands & controls in the event of a lapse in judgment on my part by venturing into off-road areas that exceeded my meager skill set. I felt that the Barkbuster products offered the benefits that I was looking for. What I got was a bunch of spacers, adapters and compromises designed to fit every motorcycle under the BMW nameplate. I hate adapters and spacers almost as much as I hate hex socket flathead screws - and this kit has plenty of each. What I didn't get was any prior information that this kit would NOT! work with my existing Kaoko Throttle Lock, which just happened to be my first purchase from Twisted Throttle back in 2009 when I bought the bike new. Further research revealed that I could of course purchase a new Throttle Lock that would work with the Barkbuster kit for an additional $126.99 (SKU# KAO.KBB700-S) GREAT! but NO THANKS. As the owner of a completely equipped machine shop, I felt compelled to correct this injustice. I’m very happy with the results. I eliminated all of the unnecessary spacers and hex socket flathead screws. I can use my OEM bar end on the left side and my Kaoko Throttle Lock on the right. I feel with the added mass of the Handlebar-End Weights, the harmonic vibrations are reduced somewhat. I’ve got about 75 miles on the bike since the installation (weather has been cooperative in Michigan in December this year) and my left hand seems to be tingling less. The quality of the Barkbuster kit was average at best. Huge chatter marks were evident in the countersinks on the aluminum support bar. The “Storm” stickers on the handguards were poorly applied and had a large wrinkle on each side – they got peeled off and went in the trash. Zinc plated screws instead of the more corrosion-resistant Cadmium plating or better yet stainless steel (I know they are not as strong, but?). Overall, I can’t say I would recommend this kit unless you have access to a qualified machine shop or are willing to put up with too many adapters. (Posted on 12/20/14)
Write Your Own Review

Only registered users can write reviews. Please, log in or register