x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
DENALI

DENALI

DENALI

DENALI Electronics

Improve visibility with the line of powerful LED light systems and the ridiculously loud Soundbomb line of horns. The blazing light output from each rugged and highly efficient light system will significantly increase your ability to see and be seen. Put out an amazing amount of light with minimal power draw designed specifically for the limited output capabilities of a motorcycle. Additionally DENALI developed the SoundBomb line of extremely loud horns that command attention from careless drivers. No matter what motorcycle you ride, DENALI Electronics has the lights, horns and mounts to increase your capability, visibility and safety!

 

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 69 total

Page:
  1. 1
  2. 2
  1. DENALI D2 2.0 TriOptic LED Light Kit with DataDim Technology

    DENALI D2 2.0 TriOptic LED Light Kit with DataDim Technology

    The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology produces a remarkable amount of light in a very compact package that is perfect for all styles of riding and types of motorcycles. With a powerful 10-watt Cree LED, the DENALI D2 casts a powerful beam 525ft down the road.

    Housed in compact aluminum pods measuring just 2.2in in diameter and 2.4in deep, the D2 LED lights are perhaps the most versatile design available; powerful enough to be your “primary” driving light yet small and light enough to comfortably mount on a fender. The DENALI D2s feature durable black powder-coated finishes and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.

    The D2 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

    Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. The flood lenses E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the D2 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. It’s that simple: See further, be seen better, with DENALI!

    Learn More
    $350.00

  2. DENALI DM 2.0 TriOptic LED Light Kit with DataDim Technology

    DENALI DM 2.0 TriOptic LED Light Kit with DataDim Technology

    The DENALI DM 2.0 LED TriOptic™ LED light kit with DataDim technology maximizes visibility in an extremely durable, efficient, compact yet very powerful package. The DM is primarily designed for conspicuity, so you’ll stand out from road clutter and be seen by other drivers, but it also provides a useful increase in illumination over your motorcycle’s stock headlight. Fitted into rugged aluminum housings only 1.7in in diameter and 2.4in long are powerful 10-watt Cree LEDs, providing 395ft of useful, confidence inspiring light. The DM’s compact shape allows it to be fitted anywhere your imagination takes it, although it’s really optimized for fender mounting.

    The DENALI DM features a durable black powder-coated finish and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.

    The DM 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

    Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. The flood lenses E-Marked to be road legal in countries where this is a requirement.

    With new optics, a revised and more powerful LED, an entirely new wiring harness, and the capability of running in both single- and dual-intensity configurations, the hugely popular DENALI DM just got a whole lot better.

    Learn More
    $275.00

  3. DENALI DR1 2.0 TriOptic LED Light Kit with DataDim Technology

    DENALI DR1 2.0 TriOptic LED Light Kit with DataDim Technology

    The DENALI DR1 2.0 LED TriOptic™ LED light kit with DataDim technology is the perfect choice for the demanding adventure or sport-touring rider looking for the greatest illumination distance. With a powerful 10-watt Cree LED and a large reflector, the DENALI DR1 casts a powerful beam 1000ft down the road. With attractive aluminum pods that are only 3.7in in diameter and 3.8in deep, the DR1 set features a durable black powder-coated finish and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts. Because of its size, the DR1 is recommended for use with sturdy crash bars or other engine-protection devices, or with DENALI’s quickly growing line of bike-specific mounts.

    Like the other lights in the DENALI 2.0 lineup, the DR1 kit uses a new HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

    Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot and True-Hybrid™ lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the True-Hybrid™ lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. This lens splits the difference between a normal spot and a conventional flood pattern, giving you the best of both worlds. And for even more flexibility, you can install just one of the True-Hybrid™ lenses to retain a little more distance coverage. The True-Hybrid™ lenses are E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the DR1 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. Enjoy the darkness with DENALI!

    Learn More
    $375.00

  4. DENALI D4 2.0 TriOptic LED Light Kit

    DENALI D4 2.0 TriOptic LED Light Kit with DataDim Technology

    The DENALI D4 2.0 TriOptic™ LED light kit with DataDim technology is among the most powerful auxiliary lights on the market, thanks to a stingingly strong quartet of LEDs that help you identify trouble as far as 800ft down the road yet still shines brightly to the edges of the road and beyond. Four 10-watt CREE XPL HI LEDs produce a piercing beam of light yet combine to use just 6.6 amps for both lamps.

    New with the DENALI 2.0 generation is the industry-leading TriOptic™ lens system. Right out of the box, the D4 is fitted with True-Hybrid™ lenses, providing a combination of spot and flood patterns in each lamp. This configuration gives you 560ft of forward light and 140ft of visibility to the side. That's almost 600ft to read a road sign and 140ft to see the deer lurking among the bushes. Also in the box are lenses that convert all four LEDs in each lamp to a spot pattern, resulting in a tight, distance-focused beam brilliant out to 800ft while still retaining a 110ft beam width. Want a third option? Fit one of each lens to your D4 pair to get a Spot-Hybrid configuration that offers 625ft of maximum distance with a 140ft beam width. The spot lenses are E-Marked to be road legal in countries where this is a requirement.

    The DENALI D4 housing is only 3.9in square and 2.6in. deep, and uses cast-in cooling fins to effectively dissipate heat and maximize light output. A durable black powder coated finish and a special Impact PC™ corrosion proof bezel ensures your lights will continue to look great even after repeated stone and debris impacts. Because of its size, the D4 is recommended for use with sturdy crash bars or other engine-protection devices, or with DENALI’s expanding line of bike-specific mounts.

    The D4 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

    DENALI’s previous quad-LED D4 has proven its worth to sport-touring and adventure riders the world over. Now, the next-generation DENALI 2.0 D4 is here to take motorcycle illumination to an entirely new level.

    Learn More
    $399.00

  5. DENALI 2.0 CANsmart Plug-n-Play Controller for BMW R1200LC Series Motorcycles

    DENALI 2.0 CANsmart Plug-n-Play Controller for BMW R1200 LC-Series Motorcycles

    Harness the flexibility and intelligence of your BMW motorcycle's CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The CANsmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches including the rotary "WunderWheel" multi controller. No more "tacked on" switches or confounding wire routing. In addition, because the CANsmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories.

    Learn More
    $239.00

  6. DENALI M4 LED Passing Lamp Modules, 4.5in Round

    DENALI M4 LED Passing Lamp Modules, 4.5in Round

    The DENALI M4 LED Passing Lamp Module is a direct plug and play replacement for your original 4 1/2 inch passing lamp sealed beams. It features a super bright main beam and a halo day time running light. Drop this passing lamp module into the existing passing lamp housing to create a piercing beam of white light that is the perfect combination of distance and width. The unique styling and black chrome finish will give your bike that modern custom look while increasing your light output and visibility to oncoming traffic.  

    All DENALI LED Lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). The LED’s boast an average life span of 50,000 hours; that’s 6 years without ever being shut off. Yes DENALI went overboard. It's what they do.

    Learn More
    $299.00

  7. SALE
    DENALI D4 Flood & Spot Hybrid LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount (Available in Canada only)

    DENALI D4 Flood & Spot Hybrid LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount (Available in Canada only)

    Note: This product is no longer able to be ordered in the USA but is available in Canada. Please use the toggle button on the upper right of your screen to switch to our Canadian website. Prices will be converted to Canadian Dollars.

    Simply put; the DENALI D4 is a beast. It is our most powerful and most versatile light packing the punch of four DENALI DM lights in one rugged housing. The four LED pod is equipped with two 60° elliptical flood lenses and two 10° spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. Consuming only 20 watts of power per lamp, the DENALI D4 lights throw a blazing beam of light 550 feet down the road in front of you. That’s over 3 times further (and way wider) than your typical motorcycle high beam.

    Learn More
    $309.99 $278.95

  8. DENALI Fender Bolt Mount Kit For Mounting DM & D2 Auxiliary Lights To M5 & M6 Bolts

    DENALI Fender Bolt Mount Kit For Mounting DM or D2 Auxiliary Lights To M5 & M6 Bolts

    The DENALI fender mount for DMor D2 lights provides a secure foundation for fitment of the LED light pods on a front fender that is fastened by M5 or M6 bolts. This kit directly replaces the OEM hardware securing the pods close to the fender for low profile appearance that will not disturb the natural aesthetics of your motorcycle. The versatile mounts can accommodate the DENALI DM LED light kit or the D2 LED light kit and are very simple to install. No drilling, cutting or any other modifications are required for fitment. Learn More
    $40.00

  9. DENALI Universal Pivot Light Mount

    DENALI Universal Pivot Light Mount

    The DENALI universal pivot light mount allows fitment of auxiliary lights to any M5, M6 & M8 hardware location for optimum placement and lighting performance. High strength aluminum is CNC machined for a precision fit and hard anodized black for enhanced durability and corrosion resistance. This versatile light mount increases possible installation points including bodywork fasteners (as long as they are capable of supporting the weight of your lights), triple clamp/fork hardware, fender bolts, handlebar mounts and more. All bolts and fasteners are also anodized or zinc plated black for super clean aesthetics. Take advantage of every possible lighting location on your motorcycle with the universal pivot light mount from DENALI! Learn More
    $65.00

  10. Denali Auxiliary Light Mounting Bracket for BMW G650GS '09-'16 & F650GS Single '04-'07

    Denali Auxiliary Light Mounting Bracket for BMW G650GS '09-'16 & F650GS Single '04-'07

    Laser-cut from mild steel and powder coated black, this light mounting bracket is both strong and attractive.  The kit allows fitment of any Denali LED Lighting Kit to the BMW G650GS '09-'14 & F650GS Single '04-'07.  All mounting hardware and instructions are included.

    Works with similar auxiliary lighting such as the PIAA Line and Hawk lights from SW-MOTECH.

     



    Learn More
    $79.99

  11. DENALI Inverted Fork Tube Auxiliary Light Mount for 50mm-60mm (2in-2.375in) Diameter Tubes | Black

    DENALI 50mm-60mm Tube Mount Kit For Mounting Auxiliary Lights To Inverted Fork Tubes | Black

    This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Lights to inverted forks, or any tube 50mm-60mm (2"-2.375") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

    These clamps are intended for motorcycles with exposed inverted forks such as enduro, dual sport, and naked motorcycles. The clamps allow lights to be mounted in front of, or to each side of the fork tubes to ensure clearance with fairings and other accessories. The clamps are also perfectly sized to clamp to the lower legs of conventional forks, typically found on many cruiser and standard motorcycles.

    Learn More
    $79.99

  12. DENALI Conventional Fork Tube Auxiliary Light Mount for 39mm - 49mm (1.5in-1.875in) Diameter Tubes | Black

    DENALI 39mm-49mm Tube Mount Kit For Mounting Auxiliary Lights To Conventional Fork Tubes | Black

    This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Light Kit to conventional forks, or any tube 39mm - 49mm (1.5" - 1.875") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

    Learn More
    $79.99

  13. DENALI D2 2.0 LED Light Pod with DataDim Technology

    DENALI D2 2.0 LED Light Pod with DataDim Technology

    The DENALI D2 2.0 LED light pod with DataDim™ technology was engineered from the ground up to create the brightest, most efficient and durable LED lights. Specifically designed for powersports applications to focus on generating the most amount of light with the least amount of power draw from your motorcycle.

    Learn More
    $135.00

  14. DENALI DR1 2.0 LED Light Pod

    DENALI DR1 2.0 LED Light Pod with DataDim Technology

    The DENALI DR1 2.0 LED light pod with DataDim&trade technology was engineered from the ground up to create the brightest, most efficient and durable LED light. Specifically designed for powersports applications to focus on generating the most amount of light with the least amount of power draw from your motorcycle.

    Learn More
    $145.00

  15. DENALI 2.0 Perch Switch Mount Kit

    DENALI 2.0 Perch Switch Mount Kit

    The DENALI 2.0 perch switch mount kit is used to fit the DrySeal waterproof switches to your clutch or brake perch. The kit includes everything needed to mount on M5 and M6 hardware in horizontal or vertical orientation.

    Learn More
    $25.00

  16. Denali Auxiliary Light Mount for Select Kawasaki & Yamaha Star Cruisers | Black (Shown with DENALI DR1 LED Light kit, sold separately)

    DENALI Auxiliary Light Mount for Select Kawasaki & Yamaha Star Cruisers | Black

    Laser-cut from mild steel and powder coated black, these light mounting brackets are both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit to the Kawasaki Vulcan Vaquero, Vulcan voyager, Vulcan 900 & Yamaha/Star 950, 950 Tourer, 1300, 1300 Deluxe, 1300 Tourer. See app chart for specific model years. Learn More
    $75.00

  17. DENALI Horn Mounting Bracket for Indian Scout '15-'16

    DENALI Horn Mounting Bracket for Indian Scout '15-'18 & Scout Sixty '16-'18

    The DENALI horn mounting bracket for Indian Scout bolts directly to the frame to provide a foundation for an auxiliary horn. Laser cut mild steel is powder coated black for a durable factory appearance that is also resistant to corrosion. This versatile horn mount is designed for mounting the DENALI SoundBomb
  18. but works with other auxiliary horns similar in design. Installation is simple and easy with no drilling, cutting or any other modifications necessary. Enjoy the capability of running an attention demanding horn and install a DENALI horn mount on your Indian Scout! Learn More
$18.99

  • DENALI Horn Mounting Bracket for BMW R1200GS LC '13-'16 & R1200GS LC Adventure '14-'16

    DENALI Horn Mounting Bracket for BMW R1200GS LC '13-'16

    The DENALI horn mount for the 2013-2016 BMW R1200GS is a bike-specific mounting kit for installing Denali SoundBomb Compact Dual-Tone Air Horn. All mounting hardware and instructions included. For easy wiring, check out the Plug-n-Play wiring kit. Use this slick horn mount for the cleanest looking installation possible!

    Learn More
    $18.99

  • DENALI M7 Heaedlight Module Adapter Kit for Suzuki DR-Z '03-'16 Models

    DENALI M7 Headlight Module Adapter Kit for Suzuki DR-Z400 '03-'18 & DR650S '02-18

    This DENALI M7 Headlight Module Adapter Kit for Suzuki DR-Z400 and DR650 bolts in place to allow mounting of the DENALI M7 headlight module for dramatically improved visibility. The robust steel bracket is laser cut for a precise fit and finished in a durable powder coated black to resist corrosion while looking factory original. Enhance the light output of your DR-Z with a little help from the lighting experts at DENALI!

    Learn More
    $30.00

  • DENALI Wiring Adapter for Connecting SoundBomb Horns to OEM BMW Harness

    DENALI Wiring Adapter for Connecting SoundBomb Horns to OEM BMW Harness

    Use the DENALI wiring adapter for connecting SoundBomb horns to the OEM BMW harness for a true plug & play connection. No wire tapping or other modifications to the original harness are necessary, just plug directly into the factory connector to send triggered power from your motorcycle. This handy little adapter is all you need when connecting a SoundBomb Mini to your BMW! For the original Compact SoundBomb and Split horn version, this special connector can be used to send triggered power from the harness so your factory horn button can activate your powerful new horn!. (The plug n play wire harness is still recommended to power both the Compact and Split models).

    Learn More
    $15.99

  • DENALI 2.0 Dual Switch Mounting Plate

    DENALI 2.0 Dual Switch Mounting Plate

    The DENALI 2.0 dual switch mounting plate allows two DrySeal™ waterproof switches to be mounted on the same handlebar mounting band.

    Learn More
    $17.00

  • DENALI 2.0 Sealed Micro Relay

    DENALI 2.0 Sealed Micro Relay

    The Denali 2.0 Sealed Micro Relay is a replacement for the standard DENALI 2.0 Premium 3-pin harness.

    Learn More
    $5.00

  • DENALI 2.0 Light Harness Extension

    DENALI 2.0 Light Harness Extension

    This DENALI Light Harness Extension can be used to extend the light leads of your DENALI 2.0 Premium 3-pin Harness by 24”

    Learn More
    $14.00

  • DENALI Wiring Adapter for H4 to H9/H11 Harness

    DENALI H9/H11 to H4 Headlight Wiring Adapter

    The DENALI H9/H11 to H4 headlight wiring adapter permits direct plug and play connection of the M5 or M7 LED headlight module to the OEM connectors of motorcycles with an original H9 and H11 split LED headlight. Simplify your headlight installation without the need to splice any wires. This handy little adapter allows your motorcycle's factory H9 and H11 connectors for the original split beam headlight to plug into the female H4 plug of the DENALI M5 or M7 LED headlight module.

    Learn More
    $39.99

  • DENALI H4 "All-On" Wiring Adapter

    DENALI "All-On" Combination Low Beam With High Beam Conversion H4 Headlight Wiring Harness

    The DENALI "All-On" Combination Low Beam With High Beam Conversion H4 Wiring Harness keeps the low beam on with the high beam activated. Enjoy dramatically improved light output that also increases overall visibility significantly. Simple plug and play installation allows the adapter to plug "inline" between the DENALI M5 or M7 LED headlight module and your motorcycle with no other modifications or switches. Improve lighting on the sides of the road, directly in front of the motorcycle and over 500 feet down the road when you activate the high beam. Leave it "All-On" with this essential adapter from the lighting experts at DENALI ELECTRONICS!

    Learn More
    $27.99

  • DENALI Power Plug for BMW GPS Connector

    DENALI Switched Power Adapter for Select BMW Models

    The DENALI switched power adapter connects to your BMW's GPS power connector (on bikes with Nav preparation) to provide a CANbus safe, switched 12V power source for triggering a relay to power DENALI lights, PowerHubs or other electronic accessories. The pre-installed Posi-lock connector means you will not have to tap, pierce, cut, or solder any original wires. The BMW GPS power source is switched with the ignition, so it will provide power when your ignition is turned on and will shut down when your ignition is turned off. Please note that this accessory circuit on most BMWs is designed with a delayed time off, so your added accessories will reflect this same factory setting.

    Learn More
    $41.99

  • DENALI 2.0 Y-Splitter Kit

    DENALI 2.0 Y-Splitter Kit

    This DENALI Y-Splitter Kit powers two sets of DENALI 2.0 LED lights from one harness! The plug-n-play adapter simply plugs into the end of the DENALI 2.0 Premium 3-pin harness, allowing control of two sets of lights Learn More
    $33.00

  • DENALI Horn Mounting Bracket for BMW S1000XR '16

    DENALI Horn Mounting Bracket for BMW S1000XR '15-'18

    The DENALI horn mounting bracket for the BMW S1000XR is a bike-specific kit for installing the Denali SoundBomb Split Dual-Tone Air Horn onto your motorcycle. All mounting hardware and instructions included. For easy wiring, check out the Plug-n-Play wiring kit. Use this sleek horn mount for the cleanest looking installation possible!

    Learn More
    $22.99

  • DENALI Compact Horn Mounting Bracket for BMW R1200RT '14-'16

    DENALI Compact Horn Mounting Bracket for BMW R1200RT '14-'17

    The DENALI compact horn mounting bracket for the 2014-2017 BMW R1200RT allows for the seamless installation of the SoundBomb horn without modifications to the motorcycle. A sturdy powder coated steel bracket attaches securely to the fairing stay between the fork tubes for a clean factory appearance. This convenient mounting bracket is simple to install and serves as the perfect stage for the powerful Soundbomb compact dual tone air horn! Learn More
    $17.99

  • DENALI Horn Mounting Bracket for BMW K1600GT

    DENALI Horn Mounting Bracket for BMW K1600GT '11-'17 & K1600GTL '11-'17

    If you are tired of not being seen by motorists, ensure that they will hear you by installing a horn that turn heads with the DENALI horn mounting bracket for BMW K1600GT. Designed specifically to mount the DENALI SoundBomb Split Dual-Tone Air Horn to your motorcycle, this bracket allows replacement of the factory unit with a much louder option. Add the DENALI BMW OEM wiring adapter for connecting to your motorcycle's wiring harness to make installation even easier. Installed in the location of the original, this rugged bracket securely tucks the horn out of sight for a clean look. Ride safer and longer by installing a head-turning horn with this easy to install mounting bracket by DENALI.

    Learn More
    $13.99

  • DENALI Auxiliary Light Mount for Honda Africa Twin CRF1000L (Shown assembled - un-mounted)

    DENALI Auxiliary Light Mount for Honda Africa Twin CRF1000L '16-'17

    The DENALI auxiliary light mount for Honda Africa Twin CRF1000L provides a secure mounting solution for fitment of aftermarket lighting. Robust steel bracketry is laser cut for a precise fit and finished in a durable black powder coating. This versatile light mount is compatible with DENALI  DM,  D2,  DX,  D4 and  DR1 LED light kits as well as most other popular brands of aftermarket lights. Existing bolt holes on the fairing stay are utilized without the need to drill, cut, weld or modify any components. The low profile design positions the lights close to the fairing for maximum visibility while also minimizing the risk of damage during a tip over or fall. Designed and engineered right here in the USA. Add the DENALI auxiliary light mount on your Africa Twin and enjoy the cleanest looking, easy to install & durable foundation for supporting your favorite aftermarket lights!

    Learn More
    $79.99

  • DENALI 3 Position Switch Kit for Dual Intensity Harnesses | Hi-Off-Low

    DENALI 3 Position Switch Kit for 1st Generation Dual Intensity Harnesses | Hi-Off-Low

    The DENALI 3 position switch kit for 1st generation dual intensity harnesses - hi-off-low is an upgrade over the original that permits more control over light output on your first generation auxiliary D2 & DX LED lights independently from the motorcycles main headlight. A laser cut powder coated steel mounting bracket is included for convenient mounting to any M5/M6 size bolt commonly found on handlebar controls. This handy switch kit is easy to install and directly replaces the original switch of the DENALI dual intensity harness found on first generation D2 & DX LED lights. Run your auxiliary lights on high, low or simply turn them off with the push of a button! Install the DENALI 3 position switch on dual intensity DENALI LED's and own the night with greater control! Learn More
    $35.00

  • SALE
    DENALI Power Switch Eliminator Plug for 1st Generation Single & Dual Intensity Harnesses

    DENALI Power Switch Eliminator Plug for 1st Generation Single & Dual Intensity Harnesses

    The DENALI power switch eliminator plug for 1st generation single & dual intensity harnesses replaces the original on/off button so your lights will automatically power on and off with the motorcycle's ignition. Enjoy the convenience of having your lights on anytime your bike is running and peace of mind knowing they will be off with the ignition. This handy eliminator plug is very easy to install, simply remove the power button that was included with the kit and plug the switch eliminator in. Designed and engineered in the USA. Simplify your 1st generation LED light kit with the power switch eliminator plug from DENALI! Learn More
    $5.99 $4.95

  • DENALI SoundBomb Compact Horn Mount for Honda Africa Twin CRF1000L '16-'17

    DENALI SoundBomb Compact Horn Mount for Honda Africa Twin CRF1000L '16-'17

    The DENALI SoundBomb compact horn mount for Honda Africa Twin CRF1000L '16-'17 provides an integrated & secure foundation for adding the ear blasting auxiliary horn from DENALI. Sturdy steel construction is laser cut and powder coated for a precise fit that is durable and corrosion resistant. This high quality horn mount bolts directly to the engine crank case cover without the need for modifications. Replacement hardware is provided making installation straightforward and simple. Use the DENALI compact horn mount on your Africa Twin to make adding the SoundBomb a wonderful experience with factory original aesthetics! Learn More
    $21.99

  • DENALI SoundBomb Compact Horn Mount for Triumph Tiger 800 XC & XR

    DENALI SoundBomb Compact Horn Mount for Triumph Tiger 800 XC '15-'17 & Tiger 800 XR '15-'17

    The DENALI SoundBomb compact horn mount for Triumph Tiger 800 XC & Tiger 800 XR allows installation of the powerful auxiliary horn from DENALI. A robust laser cut steel bracket bolts directly to the left side engine case cover and is finished in a black powder coat for improved durability and corrosion resistance. This sleek horn mount allows the Soundbomb compact horn to fit tightly against the motorcycle and blend in with the engine cases for a factory original appearance. Installation is simple and does not require any modifications. Use the DENALI horn mount on your Triumph Tiger 800 for the best looking, cleanest and easiest installation possible! Learn More
    $19.99

  • FILTER OPTIONS

    Grid List

    per page

    Items 1 to 35 of 69 total

    Page:
    1. 1
    2. 2