x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
DENALI

DENALI

DENALI

DENALI Electronics

Improve visibility with the line of powerful LED light systems and the ridiculously loud Soundbomb line of horns. The blazing light output from each rugged and highly efficient light system will significantly increase your ability to see and be seen. Put out an amazing amount of light with minimal power draw designed specifically for the limited output capabilities of a motorcycle. Additionally DENALI developed the SoundBomb line of extremely loud horns that command attention from careless drivers. No matter what motorcycle you ride, DENALI Electronics has the lights, horns and mounts to increase your capability, visibility and safety!

 

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 75 total

Page:
  1. 1
  2. 2
  3. 3
  1. SALE
    DENALI D2 Dual Intensity LED Motorcycle Lighting Kit with Full Wiring Harness and M8 Mount

    DENALI D2 Dual Intensity LED Motorcycle Lighting Kit with Full Wiring Harness and M8 Mount

    When bright is not bright enough, grab a set of DENALI D2 LED Lights from Twisted Throttle. Small and BRIGHT, with an effective beam distance of 423ft and still an incredibly small power draw!

    Learn More
    $379.99 $341.95

  2. DENALI DM 2.0 TriOptic LED Light Kit with DataDim Technology

    DENALI DM 2.0 TriOptic LED Light Kit with DataDim Technology

    The DENALI DM 2.0 LED TriOptic™ LED light kit with DataDim technology maximizes visibility in an extremely durable, efficient, compact yet very powerful package. The DM is primarily designed for conspicuity, so you’ll stand out from road clutter and be seen by other drivers, but it also provides a useful increase in illumination over your motorcycle’s stock headlight. Fitted into rugged aluminum housings only 1.7in in diameter and 2.4in long are powerful 10-watt Cree LEDs, providing 395ft of useful, confidence inspiring light. The DM’s compact shape allows it to be fitted anywhere your imagination takes it, although it’s really optimized for fender mounting.

    The DENALI DM features a durable black powder-coated finish and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.

    The DM 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

    Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. The flood lenses E-Marked to be road legal in countries where this is a requirement.

    With new optics, a revised and more powerful LED, an entirely new wiring harness, and the capability of running in both single- and dual-intensity configurations, the hugely popular DENALI DM just got a whole lot better.

    Learn More
    $275.00

  3. DENALI D4 2.0 TriOptic LED Light Kit

    DENALI D4 2.0 TriOptic LED Light Kit with DataDim Technology

    The DENALI D4 2.0 TriOptic™ LED light kit with DataDim technology is among the most powerful auxiliary lights on the market, thanks to a stingingly strong quartet of LEDs that help you identify trouble as far as 800ft down the road yet still shines brightly to the edges of the road and beyond. Four 10-watt CREE XPL HI LEDs produce a piercing beam of light yet combine to use just 6.6 amps for both lamps.

    New with the DENALI 2.0 generation is the industry-leading TriOptic™ lens system. Right out of the box, the D4 is fitted with True-Hybrid™ lenses, providing a combination of spot and flood patterns in each lamp. This configuration gives you 560ft of forward light and 140ft of visibility to the side. That's almost 600ft to read a road sign and 140ft to see the deer lurking among the bushes. Also in the box are lenses that convert all four LEDs in each lamp to a spot pattern, resulting in a tight, distance-focused beam brilliant out to 800ft while still retaining a 110ft beam width. Want a third option? Fit one of each lens to your D4 pair to get a Spot-Hybrid configuration that offers 625ft of maximum distance with a 140ft beam width. The spot lenses are E-Marked to be road legal in countries where this is a requirement.

    The DENALI D4 housing is only 3.9in square and 2.6in. deep, and uses cast-in cooling fins to effectively dissipate heat and maximize light output. A durable black powder coated finish and a special Impact PC™ corrosion proof bezel ensures your lights will continue to look great even after repeated stone and debris impacts. Because of its size, the D4 is recommended for use with sturdy crash bars or other engine-protection devices, or with DENALI’s expanding line of bike-specific mounts.

    The D4 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

    DENALI’s previous quad-LED D4 has proven its worth to sport-touring and adventure riders the world over. Now, the next-generation DENALI 2.0 D4 is here to take motorcycle illumination to an entirely new level.

    Learn More
    $399.00

  4. DENALI 2.0 CANsmart Plug-n-Play Controller for BMW R1200LC Series Motorcycles

    DENALI 2.0 CANsmart Plug-n-Play Controller for BMW R1200 LC-Series Motorcycles

    Harness the flexibility and intelligence of your BMW motorcycle's CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The CANsmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches including the rotary "WunderWheel" multi controller. No more "tacked on" switches or confounding wire routing. In addition, because the CANsmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories.

    The CANsmart's four dedicated circuits are pre-programmed to connect to and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to use right out of the box. Free software (for Mac or PC) allows you to customize these circuits, but the default settings will be right for the vast majority of installations.

    The two auxiliary light circuits enable independent adjustment of high and low beam brightness right from the vehicles WunderWheel. It also features a “flash to pass” and “strobe when horn active” setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple two-wire brake light into a “smart brake light” complete with running light, multiple flash pattern, and deceleration activated braking functionality. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.

    Want more flexibility? We thought you might. You can set any of the four circuits to “Simple Circuit” Mode, which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. The electronic fuse is the only active setting so you can properly fuse your accessory.

    Learn More
    $239.00

  5. DENALI M7 DOT LED Headlight Module | 7.0" Round - Black Chrome

    DENALI M7 DOT LED Headlight Module | 7.0" Round - Black Chrome

    The DENALI DOT approved M7 LED Headlight module is a direct plug and play replacement to the original 7 inch sealed beam headlight on your motorcycle. It features a super wide low beam, piercing high beam, and halo day time running light. Drop this headlight module inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock LED headlight. The unique design and black chrome finish of the optics will give your bike that modern custom look while also increasing your visibility to oncoming traffic even during daylight.

    Learn More
    $429.00

  6. Denali SoundBomb Compact Dual-Tone Motorcycle Air Horn

    Denali SoundBomb Compact Dual-Tone Air Horn

    LOUD! Stylish! Rugged!

    Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

    Learn More
    $49.99

  7. Denali SoundBomb Mini Electromagnetic Low Tone Horn

    DENALI SoundBomb Mini Electromagnetic Low Tone Motorcycle Horn

    At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough, be heard with the SoundBomb Mini.

    Learn More
    $29.99

  8. Denali Snap-On Beam Filter Set for Denali DR1, Spot Beam Pattern, Pair - Amber or Clear

    Denali Snap-On Beam Filter Set for Denali DR1, Spot Beam Pattern, Pair - Amber or Clear

    Get more from your Denali DR1 Lights with a set of Snap-On Beam Filters that modify the beam pattern and prolong the lifespan of the lights. The rugged shatterproof Poly-Carbonate Snap-On Covers serve as protection for the DR1 pod, while maintaining the long distance 10º Spot Pattern that comes standard in the Denali DR1.

    Learn More
    $39.99

  9. Denali Snap-On Protective Lens Cover Set for Denali DR1, Black Out Cover, Pair

    Denali Snap-On Protective Lens Cover Set for Denali DR1, Black Out Cover, Pair

    Denali Snap-On Black Out Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, snap the covers off of your Denali DR1 lights and go.

    Learn More
    $39.99

  10. Denali Lighting DM LED Light Kit For BMW R1200GS LC '13

    Denali DM Micro LED Lighting & Mount Kit for BMW R1200GS LC '13-'17

    This bike specific kit adds Denali DM LED Lights to your BMW R1200GS LC. This powder coated steel bracket locates the two LED pods directly below your stock headlight for a clean and factory looking fit.

    Does NOT fit bikes equipped with new LED headlight

    Learn More
    $289.98

  11. SALE
    DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount

    DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount

    Don't let the small size and weight fool you, with an effective beam distance of 240 feet, these little buggers are BRIGHT! Learn More
    $249.99 $224.95

  12. DENALI SoundBomb Split Dual-Tone Air Horn
    $54.99

  13. SALE
    DENALI D4 Flood & Spot Hybrid LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    DENALI D4 Flood & Spot Hybrid LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    Simply put; the DENALI D4 is a beast. It is our most powerful and most versatile light packing the punch of four DENALI DM lights in one rugged housing. The four LED pod is equipped with two 60° elliptical flood lenses and two 10° spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. Consuming only 20 watts of power per lamp, the DENALI D4 lights throw a blazing beam of light 550 feet down the road in front of you. That’s over 3 times further (and way wider) than your typical motorcycle high beam.

    Learn More
    $309.99 $278.95

  14. SALE
    Denali DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    Denali DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    The large 10° optic in the Denali DR1 maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DR1 is ideal for night riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp, the Denali DR1 lights throw a blazing beam of light 695 feet down the road. That’s over 4 times further than your typical motorcycle high beam.

    Want more from your Denali DR1 Lights? Grab a set of Snap-On Beam Filters to change the beam pattern and prolong the lifespan of the lights.

    Learn More
    $349.99 $314.95

  15. Twisted Throttle "L" Bracket, 2.5 inch, black

    DENALI L Bracket Accessory Mount, 2.5 inch | Black

    The DENALI L bracket accessory mount 2.5" black is great for mounting various accessories to your motorcycle. High strength stamped steel is 1" wide, 3mm in thickness and two and a half inches in length. This useful bracket is powder coated in an attractive semi matte black finish to increase durability and corrosion resistance. Great for use when fitting horns, lights, device mounts and anything else you need to fabricate. Keep a few of these handy DENALI L brackets in your toolbox to enhance your next installation! 

    Learn More
    $9.99

  16. DENALI Engine Guard/Crashbar Auxiliary Light Mount For 22mm-29mm (0.875in-1.125in) Diameter Tubes

    DENALI 21mm-29mm Tube Mount Kit For Mounting Auxiliary Lights To Frame & Crash Bars | Black

    This DENALI Motorcycle Engine Guard/Crash Bar Light Mount Kit allows fitment of any DENALI LED Lights to engine guards, crash bars, or any tube 21mm-29mm (0.826"-1.125") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

    These clamps are intended for mounting lights to OEM or aftermarket crash bars commonly found on adventure and dual sport motorcycles. The clamps allow the lights to be positioned inside of the crash bars, ensuring they will be protected in a tip over.

    Learn More
    $74.99

  17. Denali Horn Mount to Fit Denali SoundBomb Air Horn for the BMW F700GS '13-'16 & F800GS '08-'16

    Denali Horn Mount to Fit Denali SoundBomb Air Horn for the BMW F700GS '13-'16 & F800GS '08-'16

    Bike-specific mount kit for installing Denali SoundBomb or Stebel Compact Dual-Tone Air Horn on a BMW F700GS '13-'17 & F800GS '08-'17.  All mounting hardware and instructions included. For easy wiring, check out our Plug-n-Play wiring kit.

    Learn More
    $15.99

  18. SALE
    Denali Switch Mount For Vertical Perch Bolts

    DENALI Angled Switch Mount Plate For Vertical Perch Bolts | Single or Double Switch Plates

    Mount single or double switches to motorcycles with vertical perch bolt mounts with the Denali Angled Switch Mount For Horizontal Perch Bolts Learn More
    $12.99 $11.95

  19. SALE
    Single Switch Mount

    DENALI Flat Switch Mount Plate For Horizontal Perch Bolts | Single or Double Switch Plates

    Mount single or double switches to motorcycles with horizontal perch bolt mounts with the Denali Flat Switch Mount For Horizontal Perch Bolts Learn More
    $11.99 $10.95

  20. DENALI Plug-N-Play Wiring Kit for Denali SoundBomb Compact & Split Dual-Tone Air Horns & Stebel Air Horn

    DENALI Plug-N-Play Wiring Kit for Denali SoundBomb Compact & Split Dual-Tone Air Horns & Stebel Air Horn

    Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

    If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

    Learn More
    $26.99

  21. Denali Do-It-Yourself wiring kit for Stebel Air Horn & Denali SoundBomb Compact Dual-Tone Air Horn

    Denali Do-It-Yourself wiring kit for Stebel Air Horn & Denali SoundBomb Compact Dual-Tone Air Horn

    Just what you need with no frills. Get all the supplies and parts you need to wire your horn to your bike without having to go to the hardware store and still wonder if you have everything. Uses an ATC inline fuse instead of a typical, fragile glass fuse.

     

    Learn More
    $14.99

  22. Denali accessory mount bracket, 3 inch, black

    Denali accessory mount bracket, 3 inch, black

    Made from heavy-duty 3mm thick, 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches, overall length of bracket is 4 inches. Powder-coated flat black. Sold each. Learn More
    $9.99

  23. Denali Lighting DM LED Light Kit For BMW R1200GS LC '13-'17

    Denali Lighting DM LED Light Kit For BMW R1200GS LC '13-'17

    Exclusive from Twisted Throttle, this bike specific light mount for the 2013-2017 BMW R1200GS LC allows you to add our Denali DM LED Lights to your motorcycle. This powder coated steel bracket places the two LED pods directly below your stock headlight for a clean factory looking fit.

    Learn More
    $39.99

  24. DENALI Engine Guard/Crash Bar SoundBomb Compact Horn Mount for 21mm-29mm Diameter Tubes | Black

    DENALI Engine Guard/Crash Bar SoundBomb Compact Horn Mount for 21mm-29mm Diameter Tubes | Black

    This DENALI engine guard/crash bar horn mount kit allows fitment of the DENALI SoundBomb Compact Horn to engine guards, crash bars, or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.

    This elegant horn mount is intended for installing the SoundBomb Compact Horn, or the compressor of the SoundBomb Split Horn to OEM or aftermarket crash bars commonly found on adventure and dual sport motorcycles. Fitment allows the horn to be positioned inside of the crash bars, ensuring it will be protected in a tip over. The compressor of the SoundBomb Split Horn can also be mounted using this solution, however you will still need to find a separate location to mount the acoustic unit. Add this DENALI horn mount kit with your favorite SoundBomb and be heard!

    Learn More
    $44.99

  25. SALE
    Denali DX Xtreme Spot Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount

    Denali DX Xtreme Spot Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount

    The large 10° optic in the DX maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DX is ideal for night riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp, the Denali DX lights throw a blazing beam of light 695 feet down the road in front of you. That’s over 4 times further than your typical motorcycle high beam.

    Learn More
    $389.99 $350.95

  26. SALE
    Denali D4 LED Light Pod with M8 Mount | Single Pod

    Denali D4 LED Light Pod With M8 Mount | Single Pod

    Simply put; the Denali D4 is a beast. It is our most powerful and most versatile light packing the punch of four Denali DM lights in one rugged housing. The four LED pod is equipped with two 60° elliptical flood lenses and two 10° spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. Consuming only 20 watts of power per lamp, the Denali D4 lights throw a blazing beam of light 550 feet down the road in front of you. That’s over 3 times further (and way wider) than your typical motorcycle high beam.

    Learn More
    $150.99 $128.95

  27. DENALI Fender Bolt Mount Kit For Mounting DM & D2 Auxiliary Lights To M5 & M6 Bolts

    DENALI Fender Bolt Mount Kit For Mounting DM or D2 Auxiliary Lights To M5 & M6 Bolts

    The DENALI fender mount for DMor D2 lights provides a secure foundation for fitment of the LED light pods on a front fender that is fastened by M5 or M6 bolts. This kit directly replaces the OEM hardware securing the pods close to the fender for low profile appearance that will not disturb the natural aesthetics of your motorcycle. The versatile mounts can accommodate the DENALI DM LED light kit or the D2 LED light kit and are very simple to install. No drilling, cutting or any other modifications are required for fitment. Learn More
    $40.00

  28. DENALI PowerHub2 fuse block, master ground block and wiring harness for motorcycles

    DENALI PowerHub2 fuse block, master ground block and wiring harness for motorcycles

    Made in America!

    The PowerHub2 Power Distribution Module, manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle. Instead of attaching multiple ring terminals to your battery, use a PowerHub2!

    Learn More
    $129.99

  29. Denali Auxiliary Light Mounting Bracket for BMW F800GS & F800GS Adventure '13-'15

    Denali Auxiliary Light Mounting Bracket for BMW F800GS '08-'16 & F800GS Adventure '13-'16

    Laser-cut from mild steel and powder coated black, this DENALI Auxiliary Light Mounting Bracket for BMW F800GS & F800GS Adventure is both strong and attractive. The kit allows fitment of any DENALI LED Lighting Kit to the BMW F800GS '13-'17 & F800GS Adventure, '13-'17.  All mounting hardware and instructions are included.
     
    Works with similar auxiliary lighting such as the PIAA Line and Hawk lights from SW-MOTECH.
     
    Fits: 
    • BMW F800GS 2013-2016
    • BMW F800GS Adventure 2014-2016
    Learn More
    $49.99

  30. Denali Auxiliary Light Mounting Bracket for BMW R1200GS LC '13-'15

    Denali Auxiliary Light Mounting Bracket for BMW R1200GS LC '13-'17

    Laser-cut from mild steel and powder coated black, this light mounting bracket is both strong and attractive.  The kit allows fitment of any Denali LED Lighting Kit to the BMW R1200GS LC.  All mounting hardware and instructions are included.

    Works with similar auxiliary lighting such as the PIAA Line and Hawk lights from SW-MOTECH.
    Learn More
    $62.99

  31. DENALI D2 2.0 LED Light Pod with DataDim Technology

    DENALI D2 2.0 LED Light Pod with DataDim Technology

    The DENALI D2 2.0 LED light pod with DataDim™ technology was engineered from the ground up to create the brightest, most efficient and durable LED lights. Specifically designed for powersports applications to focus on generating the most amount of light with the least amount of power draw from your motorcycle.

    Learn More
    $135.00

  32. Denali 194 Marker Bulb Plug-and-Play Trigger Wire Adapter

    Denali 194 Marker Bulb Plug-and-Play Trigger Wire Adapter (fits some BMW, Ducati, Triumph and other motorcycles)

    This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW, Ducati, and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight.

    Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes with a custom OEM 194 bulb connector.

    Learn More
    $31.99

  33. DENALI Upper Light Mount for BMW R1200RT '05-'13

    DENALI Upper Light Mount for BMW R1200RT '05-'13

    Laser-cut from mild steel and black powder coated, this upper light mount is for the BMW R1200RT, '05 - '13. Designed to be strong, functional and attractive. Auxiliary headlights sold separately. Designed specifically for Denali LED lights. Also works just as well with PIAA lights as well.

    Learn More
    $47.99

  34. Denali Flush Mount Single-Intensity LED Strips Amber

    Denali Flush Mount Single-Intensity LED Strips Amber

    Use these compact LED strips as accent lighting or to increase nighttime visibility. Each 70mm adhesive-backed LED strip contains 15 LEDs and draws only 0.11 Amps. Learn More
    $37.99

  35. Denali Auxiliary Light Mounting Bracket for BMW R1200GS '04-'12 & R1200GS Adventure '05-'13

    Denali Auxiliary Light Mounting Bracket for BMW R1200GS '04-'12 & R1200GS Adventure '05-'13

    Laser-cut from mild steel and powder coated black, this light mounting bracket is both strong and attractive.  The kit allows fitment of any Denali LED Lighting Kit to the BMW R1200GS '04-'12 & R1200GS Adventure '05-'13.  All mounting hardware and instructions are included.
     
    Works with similar auxiliary lighting such as the PIAA Line and Hawk lights from SW-MOTECH.
    Learn More
    $40.99

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 75 total

Page:
  1. 1
  2. 2
  3. 3