x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
R&G

R&G

R&G

R&G Racing

The toughest, most functional motorcycle protection on the planet.

R&G Racing produces the most innovative, race-proven and style sporting aftermarket motorcycle accessories for the modern sport bike. Using high quality materials like high density polyethylene, aircraft- grade metals and ABS plastic they manufacture durable sliders, exhaust and tank protectors, side standsradiator and oil cooler guards, crash bars, chain guards and fender eliminators. Innovative technologies like CNC machining and 3D scanning are employed to ensure their products not only fit your motorbike perfectly, they also provide protection that is valued by discriminating riders all over the world. Working with the California Superbike School, R&G tests and develops new and exciting items, continually expanding their reach into the motorcycle market.

 

 



FILTER OPTIONS

Grid List

per page

Items 71 to 105 of 188 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. R&G Front Indicator Adapters For Kawasaki Vulcan S

    R&G Front Indicator Adapters For Kawasaki Vulcan S '15-'18 For Use With Micro Indicators

    Give your motorcycle a sportier look by getting rid of those big and bulky original indicators with the help of the R&G front indicator adapters. This set of turn signal adapters admits the use of R&G micro indicators (RG.RG370, RG.RG371 or RG.RG372.SI). Manufactured using lightweight and sturdy aluminum these adapters easily install into your motorcycle filling in the leftover gaps after removing your factory signals.

    To ensure a proper flash rate when installing a set of the R&G micro indicators get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each. These turn signal resistors require no cutting, crimping or soldering. Plug-n-play!

    Learn More
    $28.95

  2. R&G Engine Case Cover Kit for Triumph Speed Triple S '16-'18 & Speed Triple R '16-'18 | 2 Piece

    R&G Engine Case Cover Kit for Triumph Speed Triple S '16-'18 & Speed Triple R '16-'18 | 2 Piece

    The R&G engine case cover kit for Triumph Speed Triple S & Speed Triple R - 2 piece adds protection for the vulnerable left and right side engine cases with impact absorbing and abrasion resistant armor. Hearty 4 mm thick polypropylene is molded to fit directly over the OEM motor casing to preserve it from scrapes or breakage that could cause wear through and oil loss. If you go down these essential engine case covers could save you from having to replace your expensive factory cases and an even more expensive rebuild if pieces of the cover break off in the motor. Installation is simple and does not require replacement of gaskets or loss of fluids. Invest in proper protection for your Triumph with this engine case cover kit from R&G! Learn More
    $167.95

  3. R&G Stainless Steel Radiator Guard For Triumph Speed Triple R '16 & Speed Triple S '16

    R&G Stainless Steel Radiator Guard For Triumph Speed Triple R '16-'18 & Speed Triple S '16-'18

    Get heavy duty protection for your motorcycles cooling system by installing the R&G stainless steel radiator guard. R&G uses a combination of CNC machining and laser cutting to transform a 1 mm thick sheet of rust resistant, lightweight and durable stainless steel into a rad guard that perfectly fits your motorcycle. Your motorbikes radiator is now protected from harmful UFO’s like rocks, bugs and other flying debris kicked up by your front tire or vehicles in front of you. This guard easily installs using the existing mounting bolts or with a few cable ties. Give your bike the high-quality and good-looking protection it deserves with R&G. Learn More
    $101.95

  4. R&G "Tail Tidy" Fender Eliminator For Honda Grom MXS125 '16-'17

    R&G "Tail Tidy" Fender Eliminator For Honda Grom MXS125 '17-'18 For Use With R&G Micro Indicators

    Radically transform the back end of your Honda Grom by installing the R&G "Tail Tidy" fender eliminator. Simply remove your clunky original license plate holder and replace it with this sturdy and sporty aftermarket option. The "Tail Tidy" is manufactured using stainless steel for a more secure mounting solution than the factory holder and black powder coated for a great looking and durable finish. The R&G fender eliminator also gets rid of the large factory turn signals. There are 3 types of micro turn signals available for you to choose from; R&G Incandescent Micro Indicators, R&G LED Micro Indicators or the R&G Aero LED Indicators. Replace your substantial original tag holder and turn signals with the sleeker, stronger and great looking R&G "Tail Tidy" fender eliminator and lower profile R&G micro indicators.

    If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G resistors (RG.RGR0001 or RG.RGR0002).

    Learn More
    $135.95

  5. R&G "Tail Tidy" Fender Eliminator For Honda Grom MXS125 '16-'17 For Use With Original Indicators - Easy bolt-on installation

    R&G "Tail Tidy" Fender Eliminator For Honda Grom MXS125 '17-'18 For Use With Original Indicators

    The factory tag holder on the Honda Grom MXS125 is large, bulky and extends way over your rear tire, so replace it with the sleeker, sportier looking R&G "Tail Tidy" fender eliminator. This replacement license plate holder is compatible with your factory signals, comes with a LED number plate light and cleans up the back end of your motorcycle. R&G manufactures the ingeniously designed "Tail Tidy" using stainless steel and adds a black powder coat for a super durable finish. Made specifically for your motorcycle, includes all mounting hardware and installation instructions the R&G "Tail Tidy" fender eliminator provides you with a high-quality and sturdy substitution for the uninspiring original.

    If you are interested in replacing the factory turn signals with the lower profile R&G micro indicators, please use the RG.LP0207BK.

    Learn More
    $135.95

  6. R&G Carbon Fiber Brake Lever Guard for Ducati XDiavel & XDiavel S '16

    R&G Carbon Fiber Brake Lever Guard for Ducati XDiavel & XDiavel S '16-'17

    The R&G carbon fiber brake lever guard for Ducati XDiavel & XDiavel S provides protection for the front brake lever to prevent accidental interference that could easily cause a loss of control. A beautiful high gloss finish and classic twill weave provide superior strength with impressive lightweight. This essential carbon fiber lever guard is highly recommended on the XDiavel as the powerful Brembo front brakes will stop the bike without much effort. This indispensable device was developed on the race track but has proven its worth on the street for riders who regularly ride in groups or filter through traffic. With nothing protecting the front brakes, a light elbow bump from another rider could easily launch you over the handlebar. Protect your beautiful machine with the carbon fiber brake lever guard from the protection experts at R&G!

    Learn More
    $199.95

  7. R&G Carbon Fiber Brake Lever Guard for Yamaha FZ-10

    R&G Carbon Fiber Brake Lever Guard for Yamaha FZ-10 '17

    The R&G carbon fiber brake lever guard for Yamaha FZ-10 '17 provides protection of the front brake lever to prevent accidental activation that could cause serious injury. Super lightweight and beautifully crafted with a twill weave and high gloss finish this important piece of equipment not only increases your safety it also enhances the aesthetics of your motorcycle. This essential brake lever guard is highly recommended on the track to prevent a stray elbow from bumping into the lever and sending you over the bars. Also beneficial for street riders when riding in groups or when filtering through traffic, a quick bump into a side view mirror could stop you in your tracks and a cause a loss of control. Installation is easy, simply remove the factory bar end and bolt on with the supplied hardware. No other modifications necessary. Add peace of mind, protection and style to your FZ-10 with the carbon fiber brake lever guard from R&G! Learn More
    $199.95

  8. R&G Exhaust Hanger for Honda CBR500R ’16 & CB500F '16 | Black

    R&G Exhaust Hanger for Honda CBR500R ’16-'17 & CB500F '16-'17 | Black

    Replace the clunky looking stock silencer bracket and passenger peg on your Honda CBR500R or CB500F with the cleaner and more aggressive looking R&G exhaust hanger. Constructed with durable, yet light-weight 6mm aluminum, years of Moto GP racing are evident the sleek yet purposeful design of this support arm. Remove the opposite side passenger peg and add the optional left side R&G blanking plate to complete the high-speed low-drag racing look. Powder coated with a long lasting black finish and tastefully adorned with crisp graphics, the R&G exhaust hanger will keep your motorcycle looking sharp, turn after knee-dragging turn. Learn More
    $82.95

  9. R&G Stainless Steel Radiator Guard for Triumph Street Twin & Thruxton 1200

    R&G Stainless Steel Radiator Guard for Triumph Street Twin '16-'18 & Thruxton 1200 '16-'18

    The R&G stainless steel radiator guard for Triumph Street Twin & Thruxton 1200 fits directly over the original radiator to safeguard it from damage and deterioration caused by stones, bugs and other debris. High strength laser cut alloy is naturally impervious to corrosion and features an attractive brushed finish. This essential stainless radiator guard promotes maximum airflow while defending the fragile cooling fins from strikes that can cause them to bend, clog with debris or even create a puncture. No modifications are necessary for installation and mounting should only take a few minutes. Defend the vulnerable cooling system on your triumph and install this stainless steel radiator guard from R&G! Learn More
    $101.95

  10. R&G Aero Style Frame Sliders for Ducati XDiavel and XDiavel S '16-'17

    R&G Aero Style Frame Sliders for Ducati XDiavel and XDiavel S '16-'17

    R&G aero style frame sliders for Ducati XDiavel & XDiavel S were made for those of us that don't want to mess with the perfect body of our motorcycle. This part is designed to be installed on your bike using a specially engineered bracket that moves the location of the mounting point away from your frame to existing holes, requiring "no cuts".  These teardrop shaped frame sliders feature a sleeker, more aero-dynamic design than the original round bobbins. Each fitted with a removable cap to hide the bobbin fittings. Crafted from polyethylene, the sliders can actually help to slow the momentum of your bike when in a slide. This accessory has made winners out of riders on both the road and the track.

    Are frame sliders worth it? You bet. They help to keep the critical components of your motorcycle such as your frame, fairing, motor or radiator, off the ground in the event of a crash, drop or slide.

    Learn More
    $128.95

  11. R&G Titanium Radiator Guard For Kawasaki ZX10R Ninja

    R&G Titanium Radiator Guard For Kawasaki ZX10R Ninja '16-'18

    This lightweight and super strong R&G titanium radiator guard is your protection against UFO's that could damage cooling fins and leave you stranded. By installing this safeguard, your rad will be kept free of bugs, rocks and other road debris. This radiator guard is constructed out of a titanium mesh that is surrounded by a seamless frame and easily mounts over your existing radiator. Keep riding with confidence knowing that your motorcycle has high-quality protection from R&G. Learn More
    $160.95

  12. R&G Tail Tidy Rear Fender Eliminator for Suzuki GSX-S1000 '15-'16 & GSX-S1000F '15-'16

    R&G Tail Tidy Rear Fender Eliminator for Suzuki GSX-S1000 '15-'18 & GSX-S1000F '15-'18

    Give your motorcycle a trim back end with the R&G Tail Tidy rear fender eliminator for the Suzuki GSX-S1000 and GSX-S1000F. Designed specifically for your motorcycle, this kit replaces the big rear fender and license plate holder with an attractive and sleeker alternative. Constructed from stainless steel and powder coated for durability, this fender eliminator features plug and play connectors for the included license plate lamp as well as OEM turn signals or optional R&G micro or mini indicators. Get your bike’s back side in shape with the R&G Tail Tidy before your next ride and turn heads wherever you go. Learn More
    $135.95

  13. R&G Engine Case Covers for Ducati XDiavel & XDiavel S - right cover

    R&G Engine Case Covers for Ducati XDiavel & XDiavel S '16-'17 | 2 Piece Kit

    The R&G engine case covers for Ducati XDiavel & XDiavel S 2 piece kit significantly enhance protection to reduce damage during a tip over, fall or slide. Robust 4 mm thick polypropylene bolts directly to the original equipment with no need to replace gaskets or lose a drop of oil. These essential case covers absorb energy during an impact with the ground to minimize the chance of cracking while also resisting abrasion to prevent wear through during a slide. No drilling, cutting or any other modifications are necessary and replacement hardware is provided. Invest in proper protection for the heart of your Ducati with engine case covers from R&G! Learn More
    $153.95

  14. R&G Tail Tidy Fender Eliminator for Select Aprilia Motorcycles (Shown with optional R&G Micro LED indicators)

    R&G Tail Tidy Fender Eliminator for Aprilia RSV4 RR '15-'17 & Tuono V4 1100 '15-'17

    The R&G Tail Tidy fender eliminator for select Aprilia motorcycles replaces the huge factory tag holder/mud guard with a sleek low profile unit that significantly improves aesthetics. Strong stainless steel and aluminum construction is powder coated black for increased durability that blends well with the original undertail. This slick fender eliminator is 100% bolt-on and does not require any modifications to the bodywork for fitment. Use your stock turn signals or upgrade to Micro LED or Aero LED indicators for an even slimmer profile. Replace that unsightly rear fender on your Aprilia with a svelteTail Tidy from R&G!

    Learn More
    $122.95

  15. R&G Tail Tidy Rear Fender Eliminator for MV Agusta Brutale 1090 for a Sleeker Rear End

    R&G Tail Tidy Rear Fender Eliminator for MV Agusta Brutale 1090 '14-'16

    Neaten up the back end of your motorcycle with a R&G Tail Tidy rear fender eliminator for the MV Agusta Brutale 1090. Black powder-coated, stainless steel construction ensures this part will remain solid and durable for years to come. The rear mounting fender eliminator is designed to replace the (often not so pretty) OE license plate holder on your motorcycle, neatly tucking the plate under the rear seat for a sleeker, more sporty and look. 

    The plate holder supports the R&G "plug-and-play" wiring connectors allowing for a seamless installation and is also compatible with both OEM indicators (listed in drop down above) or aftermarket (8mm) using the included adapter plates.

    Learn More
    $122.95

  16. R&G Tail Tidy Fender Eliminator for Honda CBR500R '16 & CB500F '16 (Shown with optional Aero LED indicators in black)

    R&G Tail Tidy Fender Eliminator for Honda CBR500R '16-'17 & CB500F '16-'17

    The R&G Tail Tidy fender eliminator for Honda CBR500R & CB500F is a direct replacement for the unsightly factory tag holder to enhance the natural lines of the rear end with a lower profile and sturdier construction. High quality laser cut stainless steel re-positions the number plate and indicators neatly under the bodywork. This elegant tail tidy is powder coated black for supreme durability & attractive good looks. A bright LED plate light is included and stock turn signals can be re-used or upgrade to Micro LED or Aero LED signals for an even smaller profile. No drilling, cutting or any other modifications to bodywork is necessary. Significantly improve the aesthetics of your Honda and install a Tail Tidy from R&G!

    Learn More
    $135.95

  17. R&G Tail Tidy Fender Eliminator for Yamaha XSR900 (Shown with optional Aero LED indicator on left, OEM on right)

    R&G Tail Tidy Fender Eliminator for Yamaha XSR900 '16-'18

    The R&G Tail Tidy fender eliminator for Yamaha XSR900 replaces the oversized plastic rear fender/tag holder with a lower profile unit that moves the turn signals and license plate closer to the tail for a sleeker look. Superior materials like powder coated stainless steel are utilized for a refined appearance with enhanced durability. This slick fender eliminator also replaces the OEM tail light with a clear lens LED unit that compliments the back end of the XSR perfectly. Stock signals can be used with this kit or upgrade to Micro LED or Aero LED signals for an even cleaner look! Leave that ridiculous original fender behind and upgrade the rear end of your Yamaha with the R&G Tail Tidy!

    Learn More
    $115.95

  18. R&G Tail Tidy Rear Fender Eliminator for Husqvarna 701 Supermoto & 701 Enduro

    R&G Tail Tidy Rear Fender Eliminator for Husqvarna 701 Supermoto '16, Supermoto '17 & 701 Enduro '16

    Clean up the back end of your motorcycle with a R&G Tail Tidy rear fender eliminator for your Husqvarna 701 Supermoto & 701 Enduro. Stainless steel construction with a sleek black powder coat means this part is durable and will serve your bike for years to come. The easy-to-install fender eliminator was made to replace the (usually pretty ugly) OE license plate holder on your motorcycle by neatly tucking the plate under the rear seat for a sleeker and more bad ass look. 

    The plate holder is compatible with the R&G "plug-and-play" wiring connectors granting seamless installation and is also compatible with both OE indicators (listed in drop down above) or aftermarket (8mm) using the supplied adapter plates.

    Learn More
    $115.95

  19. R&G Stainless Steel Radiator Guard for Suzuki SV650

    R&G Stainless Steel Radiator Guard for Suzuki SV650 '17

    Protect the vulnerable radiator on your motorcycle from damage by flying debris with the R&G stainless steel radiator guard for Suzuki SV650. A punctured cooling system can cause engine damage and spell the end of your ride. Constructed of 1mm stainless steel, this protector will shrug off rocks without blinking and remain rust free. Avoid costly repairs and boring downtime by installing an R&G radiator guard before your next motorcycle adventure. Learn More
    $101.95

  20. R&G Stainless Steel Radiator Guard For Kawasaki Ninja H2 Ninja & Ninja H2R

    R&G Stainless Steel Radiator Guard For Kawasaki Ninja H2 '15-'18 & Ninja H2R '15-'18

    Add the R&G stainless steel radiator guard to provide an integral and expensive to repair part of your motorcycle with protection from road debris and bugs. The last thing you want while out on a tour is a punctured rad. Crafted from a 1mm thick sheet of corrosion resistant stainless steel, the laser-cut grills will provide maximum airflow to your radiator so cooling efficiency is not compromised. This durable, lightweight and good looking guard protects those fragile cooling fins so you can enjoy your adventure. Invest in high-quality protection with R&G today.

    Learn More
    $101.95

  21. R&G Tail Tidy Rear Fender Eliminator Kawasaki Ninja 1000 '14-'18 | With or Without Panniers

    R&G Tail Tidy Rear Fender Eliminator Kawasaki Ninja 1000 '14-'18 | With or Without Panniers

    Radically improve the look of your motorcycle's rear end with a R&G Tail Tidy rear fender eliminator for the Kawasaki Ninja 1000 with or without panniers. Black powder-coated, stainless steel construction ensures this part will remain solid and durable for years to come. The easy-to-fit fender eliminator is designed to replace the (sometimes ugly) OE license plate holder on your motorcycle, cleanly tucking the plate under the rear seat for a sharper, low-profile look. 

    The plate holder is compatible with the R&G "plug-and-play" wiring connectors designed for seamless installation and can also support both OE indicators (listed in drop down above) or aftermarket (8mm) mounted using the included adapter plates.

    Learn More
    $142.95

  22. R&G Race Series Engine Case Cover for Ducati 1299 Panigale / S '15-'16 | LHS - Stator Case

    R&G Race Series Engine Case Cover for Ducati 1199 Panigale '12-'14 & 1299 Panigale / S '15-'17 | LHS - Stator Case

    The R&G race series engine case cover for Ducati 1199 Panigale & 1299 Panigale / S provides protection for the entire stator case from a tip over, fall or slide. Robust 4 mm polypropylene construction absorbs impacts while resisting abrasion and mounts directly over the factory unit without the need to change gaskets or spill a drop of oil. This enhanced race series cover features a replaceable High Density Polyethylene slider (the same material used in all R&G axle & frame sliders) for a greater level of security to safeguard the heart of your Panigale. Installation is simple as only a few of the original bolts need to be removed for fitment and extended replacement hardware is included in the kit. Invest in proper protection for your beautiful Italian supermodel and install this race series engine case cover from R&G! Learn More
    $111.95

  23. R&G Race Series Engine Case Cover for Ducati 899 Panigale '14-'15 & 959 Panigale '16 with Race Fairings | LHS Stator Cover

    R&G Race Series Engine Case Cover for Ducati 899 Panigale '14-'15 & 959 Panigale '16-'17 with Race Fairings | LHS Stator Cover

    The R&G race series engine case cover for Ducati 899 Panigale & 959 Panigale with race fairings for the LHS stator cover provides essential protection in the event of a tip over, fall or slide. Hearty 4 mm polypropylene is impact absorbing and abrasion resistant to keep the heart of your beast from cracking open or wearing through and causing a catastrophic failure. This beefed up race series cover is equipped with an additional slider puck on the impact face that offers even greater insurance from getting ground down on the pavement. The slider can be replaced after a minor fall, or in between laps, no need to replace the entire cover for small spills. This specific case cover requires race fairings for proper fitment. Installation is simple and replacement hardware is provided. Invest in superior protection for your Panigale and install a race series engine case cover from R&G! Learn More
    $111.95

  24. R&G Engine Case Cover For Ducati XDiavel - right side

    R&G Engine Case Cover For Ducati XDiavel & XDiavel S '16-'17 | RHS - Clutch

    Constructed out of 4mm polypropylene the R&G engine case cover could make the difference in having to head home or preferably continuing your ride after a spill. This guard bolts directly over the original clutch, safeguarding it against damage during impacts and abrasion during a tip over, fall or slide. Longer bolts are provided to make installation a breeze. 3D scanning technologies are used to closely examine your motorcycle to ensure after being molded the cover fits perfectly. Prevent being stuck in a shop and an expensive repair bill with high-quality and great looking protection from R&G. Learn More
    $104.95

  25. R&G Tail Tidy Rear Fender Eliminator for Kawasaki Z125 PRO

    R&G Tail Tidy Rear Fender Eliminator for Kawasaki Z125 PRO '17-'18

    Swap out that big floppy stock back end on your Kawasaki Z125 PRO for a sleek and trim R&G Tail Tidy rear fender eliminator. This black powder coated stainless steel kit removes the bulky stock setup, tucking the license plate under the seat for a clean look and is compatible with either your stock indicators or upgrades like R&G Aero LED Indicators, R&G Micro LED Indicators or R&G Micro Incandescent 10 watt Indicators. Make an impression whenever you leave with the great looks and simplicity of the Tail Tidy fender eliminator by R&G.

    Learn More
    $99.95

  26. R&G Engine Case Slider for Suzuki SV650 '17 - left side

    R&G Engine Case Slider for Suzuki SV650 '17 | LHS - Stator

    The R&G engine case slider for Suzuki SV650 '17 provides protection for the left side stator case in the event of a fall or slide. CNC machined High Density Polyethylene is impact absorbing and abrasion resistant to keep the vulnerable motor from getting rashed on the pavement. This essential slider is a great investment and could save you hundreds of dollars in expensive repairs. Installation is easy and does not require any oil loss, gasket changes or other modifications. Protect your SV650 and install an engine case slider from the protection experts at R&G! Learn More
    $50.95

  27. R&G Front Indicator Adapter kit for R&G Micro Indicators on the Honda Grom MSX125 ( Aero LED indicator shown not included)

    R&G Front Indicator Adapter kit for R&G Micro Indicators on the Honda Grom MSX125 '17-'18

    Add the R&G front indicator adapter kit for R&G Micro Indicators on the Honda Grom MSX125 for a seamless low profile appearance. Durable plastic construction is lightweight and precision cut to fit the fairing perfectly. These handy adapters allow you to lose the bulky factory equipment and upgrade to the sleek R&G Micro LED indicators. Mounting to the bodywork is simple and does not require any modifications. When upgrading the turn signals on your Grom, make sure you order a set of R&G indicator adapters for the cleanest possible look!

    Learn More
    $20.95

  28. R&G Boot Guard Kit for Honda Grom MSX125

    R&G Boot Guard Kit for Honda Grom MSX125 '17-'18 | 4 Piece

    The R&G boot guard kit for Honda Grom MSX125 - 4 piece provides protection from wear and tear while improving grip to keep your boots planted securely on the pegs. Low profile synthetic rubber adds minimal thickness and is easy on expensive riding gear. These handy boot guards have a strong adhesive backing that stays put without harming the finish and makes installation a breeze. Each side has one upper and one lower pad for maximum coverage and traction. Protect your Grom and enhance grip with the boot guard kit from the protection experts at R&G! Learn More
    $47.95

  29. R&G Tail Tidy Fender Eliminator For Kawasaki Vulcan 900

    R&G Tail Tidy Fender Eliminator For Kawasaki Vulcan 900 Custom '12-'18

    The R&G Tail Tidy fender eliminator will clean up the back end of your motorcycle. This handy unit is constructed out of stainless steel and is finished with a black powder coat for added protection and good looks. Easily installed, this fender eliminator removes your big and bulky factor tag holder by tucking your number plate under the rear seat for a sleeker look. Combine this Tail Tidy with your original turn signals or one of R&G’s Micro Indicators. The R&G tail tidy fender eliminator is just what you need on your Kawasaki Vulcan 900 to improve the aesthetic appeal of this awesome machine.

    If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G Resistors (RG.RGR0001 or RG.RGR0002).

    Learn More
    $146.95

  30. R&G Stainless Steel Radiator Guard for Ninja 650 & Z650

    R&G Stainless Steel Radiator Guard for Ninja 650 '17-'18 & Z650 '17-'18

    The R&G stainless steel radiator guard for Kawasaki Ninja 650 and Z650 provides durable & attractive protection from damage for the most vulnerable component of the cooling system. Naturally corrosion resistant alloy is 1mm in thickness for added strength over comparable aluminum screens and laser cut for an attractive and precise fit. This essential radiator guard deflects bugs, stones and other debris that can bend fragile cooling fins, reducing the cooling efficiency and even cause a puncture. Installation is simple without the need for drilling, cutting or any other modifications. Invest in proper protection for your Kawasaki Ninja 650 and Z650 and install a stainless steel radiator guard from R&G! Learn More
    $101.95

  31. R&G Engine Case Covers for Triumph Street Triple Rx

    R&G Engine Case Covers for Triumph Street Triple & Street Triple R '13-'17 & Street Triple Rx '15-'16 | 2 Piece Kit

    The R&G engine case covers for the Triumph Street Triple Rx is a 2 piece kit significantly enhance protection to reduce damage during a tip over, fall or slide. Robust 4 mm thick polypropylene bolts directly to the original equipment with no need to replace gaskets or lose a drop of oil. These essential case covers absorb energy during an impact with the ground to minimize the chance of cracking while also resisting abrasion to prevent wear through during a slide. No drilling, cutting or any other modifications are necessary and replacement hardware is provided. Invest in proper protection for the heart of your Triumph with engine case covers from R&G! Learn More
    $167.95

  32. R&G Tail Tidy Fender Eliminator for Kawasaki Z650 (shown with original signal on left & upgraded R&G Aero LED indicator on the right - sold separately)

    R&G Tail Tidy Fender Eliminator for Kawasaki Ninja 650 '17-'18 & Z650 '17

    The R&G tail tidy fender eliminator for Kawasaki Ninja 650 and Z650 replaces the unnecessarily large factory original tag holder with a much slimmer unit significantly enhancing overall aesthetics. Sturdy stainless steel construction mounts to the motorcycle in the same manner as the OEM unit and is powder coated black for improved durability and corrosion resistance. This slick fender eliminator is compatible with the original turn signal indicators or upgrade to the R&G Micro LED or Aero LED signals for an even sharper appearance. An LED tag light is also included in the kit to ensure your license plate is still visible at night. Tighten up the rear end of your Z650 with the tail tidy fender eliminator from R&G!

    Learn More
    $106.95

  33. R&G Carbon Fiber Brake Lever Guard for Kawasaki Ninja 650 & Z650

    R&G Carbon Fiber Brake Lever Guard for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18

    The R&G carbon fiber brake lever guard for Kawasaki Ninja 650 and Z650 provides protection against front brake interference in a lightweight, attractive and essential piece of safety equipment. High tech organic polymers are woven in a beautiful twill weave and finished in a high luster glossy clear coat. This critical brake lever guard prevents stray elbows and other exterior forces from bumping directly into your front brake lever. Unintended inputs can very easily cause a loss of control and lock the front tire which can flip the motorcycle without warning. The significant increase in safety by using a brake lever guard has been recognized and adopted by many major racing organizations.  There are obvious benefits on the track but street riders who regularly ride in groups or split lanes can also significantly reduce their risk. Bumping into a fellow rider during a group ride or grazing a car mirror when filtering through traffic could quickly cause a loss of control without a lever guard.

     Installation is easy and does not require any modifications. Invest in proper protection and stunning aesthetics for your Kawasaki Z650 by installing a carbon fiber brake lever guard from R&G!

    Learn More
    $199.95

  34. R&G Aero Style Frame Sliders for Kawasaki Z650

    R&G Aero Style Frame Sliders for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18

    The R&G aero style frame sliders for Kawasaki Ninja 650 and Z650 provide essential protection against damaging vulnerable components in the event of a tip over, drop or slide. Abrasion resistant and impact absorbing High Density Polyethylene (HDPE) is used to keep the motorcycle off of the ground so critical components are safe from getting ground into the pavement. These protective frame sliders secure to the main frame of the motorcycle with de-embrittled bolts that are designed to bend at the point of failure instead of shearing off and leaving the motorcycle unprotected. No modifications are required for proper installation. Available in black or white. Invest in proper protection for your Kawasaki Ninja 650 or Z650 and install a set of aero style frame sliders from the protection experts at R&G! Learn More
    $91.95

  35. R&G Titanium Race Series Radiator Guard for Yamaha YZF R3 '15-'17

    R&G Titanium Race Series Radiator Guard for Yamaha YZF R3 '15-'17

    Provide lightweight protection for the vulnerable radiator on your Yamaha YZF R3 with the R&G Titanium Race Series Radiator Guard. Twice as strong as aluminum, the ASTME B265 Grade 1 titanium sheet used to create the mesh will protect your motorcycle’s cooling system on the track or the street from kicked up debris with less weight than traditional guards. Keep a stone or a chunk of tire from ending your day or perfect ride with the Titanium Race Series Radiator Guard by R&G. Learn More
    $134.95

FILTER OPTIONS

Grid List

per page

Items 71 to 105 of 188 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Chat with us!