SW-MOTECH
SW-MOTECH - Quality & Precision
...designing and manufacturing premium motorcycle accessories since 1999.
SW-MOTECH manufactures the
toughest and most thoughfully designed products you can buy for your
motorcycle. The engineers, designers, and
prototypers at SW-MOTECH
are continually working to push quality standards and
find new
ways to develop better products.SW-MOTECH is known for producing
precision products that fit even better than many OEM parts. Products
include
crash
protection, centerstands, accessory mounts, footpegs, luggage carriers
and
luggage for a wide variety of machines.
-
Handlebar riser barbacks & top clamps (BMW, Ducati, Gas-Gas, Honda, Kawasaki, KTM LC4, MZ, Suzuki, Triumph, Yamaha) - pair, 1" rise & 1" pullback
Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More$96.99 -
Handlebar risers (BMW, Ducati, Kawasaki, KTM LC4, Gas-Gas, Honda, MZ, Suzuki, Triumph, Yamaha), rise height of 20mm, 25mm, 30mm or 50mm - by SW-MOTECH
Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. Learn More$54.99 -
SW-MOTECH mirror wideners for right-threaded M10 mirrors (BMW/Ducati/Honda/Kawasaki/ KTM/Suzuki/Triumph), 40mm
If you're tired of seeing your own shoulders in your rearview mirrors, then these are for you! This pair of mirror wideners screws into the original mirror mount on your motorcycle handlebars, providing a spacer between the base of the rearview mirror and the motorcycle's original mirror mount. Learn More$70.99 -
Handlebar risers (Triumph Tiger Explorer 1200, '12-, Tiger 800 / 800XC, '11-) 20mm rise
For use with original top clamp. Adds an additional 20mm of rise to the bar height without changing of control cables, wiring, or hoses. However, the installer should always check for adequate cable/wiring/hose slack during installation. Available in polished silver finish.
Learn More$54.99 -
$1.50 -
SW-MOTECH mirror wideners (Yamaha FJR1300, '06-)
If you're tired of seeing your own shoulders in your rearview mirrors, then these are for you! This pair of mirror wideners screw into the original mirror mount on your motorcycle's fairing, providing a spacer between the base of the rearview mirror and the motorcycle's fairing. Extends each rearview mirror approximately 1.56 inches perpendicular to the original profile of the mirror base. Learn More$70.99 -
SW-MOTECH mirror wideners (Kawasaki Ninja 250R '08-, EX500 Ninja '94- / Ninja 650R '06- / Z750S/ZX6R/ZX10/ZX12/ZX14
If you're tired of seeing your own shoulders in your rearview mirrors, then these are for you! This pair of mirror wideners screw into the original mirror mount on your motorcycle's fairing, providing a spacer between the base of the rearview mirror and the motorcycle's fairing. Learn More$70.99 -
SW-MOTECH universal handlebar crossbar
Installs in minutes by clamping onto existing 7/8" (22mm) diameter handlebar. Perfect for mounting GPS, radar detector, coffee mug, flux capacitor, etc. Available in powdercoated silver (s) or black (b). Learn More$24.99 -
SW-MOTECH On-Road/Off-Road Footpegs (Kawasaki KLR650 A / E '86-'09)
The convertible footpeg system from SW-Motech allows you to replace your stock pegs with wider pegs at one of two heights, complete with a removable rubber pad for quick conversion from on to off-road applications! Bike-specific mount and set of footpegs with removable textured rubber foot pads included. Fits the Kawasaki KLR650A & KLR650E '86-'09. Learn More$147.98 -
Handlebar riser barbacks & top clamps for 28mm bars - pair, 1.25" rise & 1" pullback
Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More$96.99
