Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Oxford Heaterz Premium Touring Motorcycle Heated Grips

$89.99
SKU: OXF.OF691Z

In stock


OR
 

The Premium line is Oxford's latest generation of heated grips. The Touring version fits standard 7/8" handlebars and has ergonomically engineered grip pattern to optimize riding performance. Thicker rubber in areas of maximum wear; 5² block siped tread patterns for high levels of grip and feel; diamond tread pattern where maximum grip is required.

Intelligent heat controller features:

  • 5 heat settings (30%, 40%, 50%, 75% and 100%) with LED lights to indicate heat setting
  • Sealed-for-life welded case for long-term durability and weather proofing
  • Battery Saving Mode turns grips off if you forget or if battery voltage falls too low
  • Raised and tactile silicone buttons for use with gloved hands

What's in the box:

  • Throttle and clutch side Touring pattern grips
  • Intelligent Heat Controller
  • Metal bracket and hardware for mounting controller
  • Wiring harness with 5 amp mini-blade fuse, zip-tys and grip glue
  • Instruction booklet and 2 year warranty card

Technical Specs:

  • Fits 7/8" (22mm) handlebars and clip-ons
  • Standard length 4.72" (120mm) Trimmable to 4.37" (110mm)
  • Grips are open ended to allow for bar-end weights and/or handguards
  • Current drain: Average 3.6 amps per pair (up to 2.0 amps each - 28-30 watts)
  • Fuse: 5 amp mini-blade (available in most auto parts stores)
  • Intelligent Heat Controller draws only 71 micro amps (0.071mA) in standby mode

Installation notes:

Requires only standard tools. No splicing, crimping or soldering needed. Connects direct to battery with ring terminals.

Also available: Oxford Premium Adventure Heaterz and Oxford Premium Sports Heaterz

Customer Reviews
Review by Mbd
Rating
I was very impressed with the high quality of the actual grips, the controller, wiring and connectors.

The actual installation on a Honda VFR1200 was straight forward but did take about 5 hours. It was necessary to remove any old glue and paint from the handlebars and burrs on the inside of the grips. I am very pleased with the final installation.

They grips work great, providing lots of heat with good control. The auto-shutoff feature seems very reliable.

I would definitely recommend these heated grips. (Posted on 10/4/14)
Review by Anonymous
Rating
Installed on a 2013 V-Strom 650 - they work great although it hasn't been below 50 degrees in the mornings so I only have run them on the lowest setting. One plus is that I like the grips themselves better than the stock items. There are videos on youtube on how to install them. One warning - be sure to cover your tank to protect it from the superglue and leave it there overnight. I didn't and found where the glue had dripped out. I had to use a little acetone to get it off. (Posted on 7/7/14)
Review by Robert
Rating
These heated grips work really well, the best I have ever owned. Hard but I did not notice that when riding. Controls are easy to use even with gloves on. Indicators are easy to read even in bright sunlight.

For Triumph owners - clutch side mounted with no issues. Had to take a Dremel tool to grind off the wings on the throttle side. I suggest using glass cleaner if you dry fit. Mounting bracket did not fit on my bike so I ordered the Denali Clamp-On Switch Mount For 7/8 Inch Handlebars, worked perfectly. (Posted on 12/27/13)
Write Your Own Review

Only registered users can write reviews. Please, log in or register