The MICRO-START Harness Kit allows you to easily jump start your vehicle using just the MICRO-START without the need for the clamps, or removing the seat on your motorcycle.
It is a 12" (300mm) harness that connects directly to the battery while the other end can plug directly into the MICRO-START unit. It adds convenience and saves time if you have to jump start your motorcycle. Connect the MICRO-START directly to this harness and jump-start your vehicle. Also included in the kit is an adapter that converts the Micro-Start Harness down to an SAE Connector (Battery Tender type) so you can easily hook up your battery charger and eliminate the standard SAE harness you might have.
- MICRO-START harness (12" long)
- MICRO-START to SAE reducer (allows for hooking a standard Battery Tender [SAE] type charger to the MICRO-START harness).
A standard Battery Tender type Harness WILL NOT handle jump-starting, the wire gauge is much to thin and will melt the wires.
The MICRO-START is for jump-starting ONLY through the jump start port! NEVER leave the MICRO-START connected to your vehicle's battery or use in place of your vehicle's battery! DO NOT try to charge the MICRO-START from your battery through the jump start port. Severe damage can result!
- Review by BrianW
- Review by Whatever