CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles | 2in rise Aluminum

Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles | 2in rise Aluminum

$94.00 $84.60
SKU: ROX.1R-P2PP

Out of stock but more due on Sep 03, 2017. Order now for fastest delivery.


OR
 

Rox Handlebar Risers for 28mm bars on select BMW, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for oversized handlebars and fatbars, they feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

These Rox risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

Features:

  • 2 inches of displacement
  • Made for 28mm (1 1/8 inch) handlebars
  • Pivots forward or backward depending on personal preference
  • CNC machined billet 6061 T6 aluminum
  • Available in black anodizedgunmetal gray anodizedclear anodized or machined aluminum finish

What's In The Box:

  • One set of Rox Handlebar Risers for 28mm (1-1/8in) bars
  • Installation hardware
  • Installation manual
  • Rox sticker

Handlebar risers for 28mm handlebars fit bikes including:

  • BMW F800GS '08-'12
  • BMW F800GS '13-'16
  • BMW F800GS Adventure '14-'17
  • BMW F800GT '13-'17
  • BMW R nineT '14-'17
  • BMW S1000R '14-'17
  • BMW R1200GS '04-'12
  • BMW R1200GS Adventure '06-'13
  • BMW R1200R '06-'14
  • Ducati Hypermotard 821 '13-'15
  • Ducati Hypermotard 1100 '08-'13
  • Ducati Multistrada 1200, 1200S & 1200S GT '10-'14
  • Honda CTX700 '14-'17
  • Honda CTX1300 '14
  • Honda XRV750 & XRV650 Africa Twin '88-'03
  • Honda Africa Twin CRF1000L '16
  • Kawasaki Z1000, '03-'16
  • KTM 250 '04-'16
  • KTM 300XC '04-'16
  • KTM 350EXC/XC/SX '04-'16
  • KTM 450EXC/SX/XC '04-'16
  • KTM 500EXC/XC '04-'16
  • KTM 690 Enduro R '07-'17
  • KTM 950 Adventure '03-'15
  • KTM 990 Adventure '06-'13
  • KTM 1050 Adventure '15-'16
  • KTM 1290 Super Adventure & T '15-'17
  • Moto Guzzi Stelvio 1200 4V '09-'11
  • Triumph Speed Triple '08-'15
  • Triumph Street Triple '08-'11
  • Triumph Tiger 800XC & 800XCS '11-'14
  • Triumph Tiger 1200 Explorer '12-'15
  • Yamaha V-Max 1200 '04-'07
  • Yamaha FJ-09 '15-'17
  • Yamaha XT1200Z Super Tenere '11-'13

Note: First determine if you have adequate cable length and if cables can be re-routed before installing handlebar risers. Amount of extra cable length varies based on make and model. It is recommended that you consult your local dealer. After installation, check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.

Write Your Own Review

Only registered users can write reviews. Please, log in or register