CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 '14-'17 & XT1200Z Super Tenere '14-'17 | 2in rise

Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 '14-'17 & XT1200Z Super Tenere '14-'17 | 2in rise

$119.95 $107.96
SKU: ROX.1R-P2PPS10

In stock

Only 8 left

Product Name Qty
6
2

* Required Fields


 

Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 & XT1200Z Super Tenere allow you to adjust the position of your handlebars, instead of adjusting your posture to them. The extended stem at the bottom of the risers is specifically designed for the angled bar clamps of the FZ-09 and the XT1200Z; The extension ensures that there is enough surface area for a secure mount. These ergonomics enhancing risers feature dual rotation points that allow you to pivot them up and back diagonally approximately 2in to relieve the pressure that can build up on your wrists, forearms, and neck. Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. Not only do they improve your riding position and comfort level, these barbacks look stylish on your machine.

Features:

  • 2 inches of displacement
  • Made for 28mm (1 1/8in) handlebars
  • Pivots forward or backward depending on personal preference
  • CNC machined billet 6061 T6 aluminum
  • Available in black or natural aluminum finish

What's In The Box:

  • One set of Rox Handlebar Risers with extended stem for 28mm (1-1/8in) bars
  • Installation hardware
  • Installation manual
  • Rox sticker

Fits bikes including:

Yamaha

  • Yamaha FZ-09 '14-'17
  • XT1200Z Super Tenere '14-'17

Note: First determine if you have adequate cable length and if cables can be re-routed before installing handlebar risers. Amount of extra cable length varies based on make and model. It is recommended that you consult your local dealer. After installation, check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.

You may also be interested in the following product(s)

Write Your Own Review

Only registered users can write reviews. Please, log in or register