Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

AdMore Lighting High Output Premium LED Light Bar | Running, Brake, Progressive Turn Signals & Smart Brake Technology

AdMore Lighting High Output Premium LED Light Bar | Running, Brake, Progressive Turn Signals & Smart Brake Technology


In stock

* Required Fields


Built-in accelerometer helps reduce the risk of rear-end collisions

The AdMore Lighting high output premium LED light bar with running, brake, progressive turn signals, and Smart Brake technology is an essential piece of safety equipment on your motorcycle. With the programmable accelerometer, this new light bar is one of the most advanced motorcycle safety accessories on the market. It's also some of the cheapest insurance you can buy.

*Photo does not illustrate white LED strobe lights which illuminate in center of bar when deceleration is detected. Used for demonstration of brake/running lights and turn signals only.  

AdMore has upped the ante with this Smart Brake technology. Significantly reduce the risk of a rear-end collision with a sophisticated accelerometer that activates brake lights with no input other than rapid deceleration via throttle release or downshifting. Command attention with 81 retina burning LED's that feature progressive amber turn signals. The brake light ignites with a flashing strobe upon initial application to capture the awareness of drivers behind you with a consistent strobe of white LED's that are sure to be seen. The unit also works with the hazard (4-way flasher) lights of your motorcycle by activating both progressive turn signals to increase roadside visibility.

This LED light bar is pre-configured with the most popular settings and options, and is primed to go out of the box.  If you like to tinker, and tweak, the AdMore light bar allows you to customize its pre-set status. Simply connect it to any computer using the included Micro-USB cable, and the AdMore Configurator Software Suite helps you modify the brightness level, deceleration sensitivity, brake light modulation, white strobe light, license plate light and more!

The AdMore premium light bar is easy to install using the strong universal black powder coated aluminum mounting bracket. All hardware and premium connectors are included in the kit.


  • Enhanced rearward visibility 
  • Smart Brake technology
  • Significantly reduces the potential for rear end collisions
  • Accelerometer sensor activates brake light automatically during rapid deceleration
  • Detects deceleration and illuminates at varying intensities depending on rate of deceleration
  • Illuminates before you can apply brakes
  • Brake light sensitivity is customizable
  • 81 unified, high intensity, bi-color (red / amber) SMART LEDs, and 3 white LEDs
  • Progressive amber turn signals
  • Brake light modulation (on/off function, or select the number of flashes)
  • Strobe functionality in brake mode (on/off function)
  • Provides tail light, brake light, progressive amber turn signals, and a strobe effect when brakes are initially applied to slow down with consistent flasing white leds
  • Programmable via USB port
  • Micro-USB port (cable included) provides connectivity for firmware upgrades and to access AdMore Configurator Software Suite (Windows 7,8 & 10 compatible or Command Line [Linux or MAC OS] compatible) for user definable option
  • Firmware upgrades available
  • Universal fitment for motorcycles and scooters
  • CanBus compatible
  • White LED license plate light 
  • Available with a clear, or smoke tinted lens
  • Dimensions: 8" W x 1.25" H x .87" D
  • When tapped into auxiliary power, light stays illuminated for up to 60 seconds - great when parking in dark locations
  • Easy to install

What’s In The Box:

  • AdMore LED light bar with new Smart Brake technology
  • Universal mounting bracket crafted using aluminum and black powder coated
  • Premium wire tap connector set
  • Complete hardware kit - all hardware needed for installation included
  • Micro USB cable


Motorcycle Wire Identification Guide
This information is to be used as a guide only.
Always consult the factory wiring diagram for your particular motorcycle model year before attempting any installation.
If your motorcycle is not listed below, check out our article on Determining Your Motorcycle's Brake, Tail & Turn Signal Wires.

Tail Lights* Gray with Black stripe* or Blue with Gray stripe* or Black with Gray stripe* or Red, Yellow and Gray*
Brake Lights* Yellow with Gray stripe* or Gray with Black stripe*
Left Turn Signal Blue with Red stripe
Right Turn Signal Blue with Black stripe
High Beam Headlight White
Low Beam Headlight Yellow
Ground Brown
*Note: BMW wiring varies drastically on Tail Lights and Brake Lights. Single wire Tail Lights will vary even more. 
Can-Am Spyder
Tail Lights Orange
Brake Lights White
Left Turn Signal Gray and Pink
Right Turn Signal Brown and Yellow
Ground Black
Harley Davidson
Tail Lights Blue
Brake Lights Red with Yellow stripe
Left Turn Signal Violet
Right Turn Signal Brown
High Beam Headlight White
Low Beam Headlight Yellow with Black stripe
Ground Black
Tail Lights Brown with White stripe
Brake Lights Green with Red or Yellow stripe
Left Turn Signal Orange
Right Turn Signal Light Blue
High Beam Headlight Blue
Low Beam Headlight White
Ground Green
Tail Lights Red
Brake Lights Blue
Left Turn Signal Green
Right Turn Signal Grey
High Beam Headlight Red with Black stripe
Low Beam Headlight Red with Yellow stripe
Ground Black with Yelow stripe
Tail Lights Grey
Brake Lights White with Black stripe
Left Turn Signal Black
Right Turn Signal Light Green
High Beam Headlight Yellow
Low Beam Headlight Black with Blue stripe
Ground Black with White stripe
Tail Lights Blue
Brake Lights Yellow
Left Turn Signal Brown
Right Turn Signal Green
High Beam Headlight Yellow
Low Beam Headlight Green
Ground Black

Note: Legal for off-road use only unless white LEDs are turned off using the included software for user defined configuration.

Customer Reviews
Review by peter
Installed this on 2015 vstrom 650, installation was pretty simple. Light is mounted under licence place and looks great. It'r very bright and is a huge improvement over stock. I don't know how well accelerator works, going to ask someone to follow me and observe. So far I like it a lot. (Posted on 5/30/2016)
Review by mister beemer
I was lucky enough to have one of the first of these lights installed in Daytona. I can honestly say it is one of the best accessories i have ever had on my bike. It is so much brighter than stock and the features are incredible. I especially like the strobe that activates at stop lights or stop signs to alert drivers from running into you.The directional and brakes are sooo bright. drivers can't miss you. (Posted on 3/28/2016)
Write Your Own Review

Only registered users can write reviews. Please, log in or register