Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

SW-MOTECH sub-frame support arms for Honda XR650L '93-'17 | Silver

SW-MOTECH sub-frame support arms for Honda XR650L '93-'17 | Silver

SKU: FRM.01.824.10000

Call for Availability


These support arms are constructed of 1/4" steel flat stock to offer additional support for the notoriously soft XR650L sub-frame. Bolt-on strength. No cutting, drilling or welding required to install these arms. These support arms are designed to work with the STOCK OEM HONDA EXHAUST ONLY. There are no guaranties that these arms will work with an after market exhaust.

Designed to increase the strength of the rear sub-frame of the Honda XR650L for use with side cases and top cases.

Do you have an aftermarket or "alternative" pipe on your XR650L? Interested in this support arm but know it won't fit with your aftermarket exhaust? We are collecting some data and considering a redesign of the right side support arm and need your help. Visit and vote to help us make a support arm that offers the most complete fitting range.

Please Note: This part will not work with the FMF Q4 exhaust system or Supertrapp Racing Series Exhaust.

Customer Reviews
Review by Davexr650l
When I purchased these, I knew they only were made for stock exhaust on the xr650l. I have the DG type O exhaust, and weigh 343lbs before gear so I needed support, it was not hard to figure out and to mod the one exhaust side support, I used a 4" grinder and just ground out a upside down "U" to fit around the pipe, this was the only thing needed to fit with an aftermarket exhaust. It is still very strong, did not lose strength by me notching it out, I tried bending it in all ways, but it is still a very solid piece of steel. I highly recommend them, not the little gusset supports because the gussets just crack right passed the welds, the heat from welds weakin the frame (Posted on 4/22/2016)
Review by Jpacman
Upon installation, I found that, like most things, this item required a little "tweaking" to make it fit my bike. Maybe since my '03 is a little older, the frame is twisted or something but these bars needed some pushing and pulling to make them fit. I stopped just short of drilling the holes bigger. The right side had no problem clearing the Yoshimura pipe but the left side hit the frame behind the battery box. A little bend and it's fine. I hope this doesn't compromise it's structural integrity as I only had to deflect it about 1/4". Very sturdy steel and the included hardware was correct. (Posted on 1/28/2016)
Review by Bill56
Disappointed they will not fit with FMF Q pipe and header. (Posted on 2/26/2015)
Review by Joyfylspirit
So happy I bought these support arms! Perfect fit and finish! (Posted on 11/3/2014)
Review by Dano
I read that is was compatible with Supertrapp Racing Series Exhaust but it is not. Quality looked great but ended up costing me over $22 shipping both ways. (Posted on 7/28/2014)
Review by Anonymous
Excellent quality item, fast delivery. One satisfied dude here from Canada and will always look to Twisted throttle for future upgrades for my XR650L.

Thank you (Posted on 7/7/2014)
Write Your Own Review

Only registered users can write reviews. Please, log in or register