Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Available in black (YAM300) and silver (YAM300S). Black matches original bar ends on most models; silver matches original bar ends on MT01.To install, just remove the right hand bar weight, replace it with Kaoko's bar weight, and firmly tighten the central retaining screw.
- Greatly reduces rider fatigue and strain on hand and wrist
- While cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set
- Very simple to operate, even with heavy winter gloves
- High quality, compact and durable design, super smooth action
- Takes less than 5 minutes to fit
- Very little maintenance is required
- Less wear and tear on throttle cables and linkages
- Can result in reduced fuel consumption
Yamaha FZ1 '01 -'10
Kit does NOT include a replacement left-side bar end weight.
Kaoko Safety Warning: The Kaoko Cruise Control is an aftermarket accessory. Any misunderstood, abused or incorrectly installed motorcycle accessory is a safety hazard that could cause injury or death. Its the riders responsibility to understand the operation and purpose for which the Kaoko Cruise Control is designed, namely, for cruising, only when safe to do so. At all other times the control should be disengaged. The Kaoko Cruise Controls are to be used only by experienced and responsible riders.
U.S. Pat. No. US D593,462 S
U.S. Pat. No. US D593,463 S
U.S. Pat. No. US D593,464 S
- Review by LKLD
What a difference! I installed it in about 2 minutes. Took it for a ride to see if it'll hold. YES! It holds! It'll take some seat time to be able to do it without thinking about it, but it really is easy, just learning to do it while holding a steady throttle will take a little practice. Once set, you might have some creep up/down, however a slight adjustment will get it set and it will stay. You can easily move the throttle while it's locked. So you could come to a stop, take off, get to speed and let go. A slight turn of the wheel will disengage it completely. To be clear, this is a throttle lock, not a cruise control, so it can't take into account for hills and valleys. However, when that throttle hand needs a break, you'll be able to do so.
Don't waste your money on the cheap stuff, get this and do it right the first time. I highly recommend this! (Posted on 6/6/2015)
- Review by SBouchard