x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Search results for 'risers'

FILTER OPTIONS

Grid List

per page

Items 36 to 70 of 163 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. SW-MOTECH Vibration-Damped Quick Release GPS Holder for Kawasaki Versys 650 '07-'14

    SW-MOTECH Vibration-Damped Quick Release GPS Holder for Kawasaki Versys 650 '07-'14

    This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More
    $81.95

  2. Gen-Mar Handlebar Risers For Triumph Sprint ST '99 - '00

    Gen-Mar Handlebar Risers For Triumph Sprint ST '99-'00

    Provides a more upright, comfortable riding position by raising the original handlebar by 32mm (1 1/4 inch). No need to replace your handlebars - simply remove the bars from the top clamp, place the riser between the handlebar and original top clamp, and reinstall the bars using included hardware. Learn More
    $139.95

  3. Rox 2in Handlebar Risers For 1in Bars on Street Cruiser Motorcycles shown in chrome finish

    Rox Handlebar Risers For 1in Bars on Street Cruiser Motorcycles | 2in rise

    Rox 2in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for street and cruiser style motorcycles with OEM 1 inch tubular handlebars, these bar risers feature dual points of rotation that allow you to pivot your handlebars up and back approximately 2 inches. This adjustment relieves the pressure that builds on on your wrists, forearms and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these barbacks will get you riding in comfort again.

    Is 2 inches of displacement not enough? We also carry Rox 3in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles and Rox 4in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in three finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $94.00

  4. Rox 3in Handlebar Risers For 1in Bars on Street Cruiser Motorcycles shown in chrome finish

    Rox Handlebar Risers For 1in Bars on Street Cruiser Motorcycles | 3in rise

    Rox 3in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for street and cruiser style motorcycles with OEM 1 inch tubular handlebars, these bar risers feature dual points of rotation that allow you to pivot your handlebars up and back approximately 3 inches. This adjustment relieves the pressure that builds on on your wrists, forearms and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these barbacks will get you riding in comfort again.

    Is 3 inches not the correct displacement? We also carry Rox 2in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles and Rox 4in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in three finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $114.95

  5. Rox 4in Handlebar Risers For 1in Bars on Street Cruiser Motorcycles shown in chrome

    Rox Handlebar Risers For 1in Bars on Street Cruiser Motorcycles | 4in rise

    Rox 4in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for street and cruiser style motorcycles with OEM 1 inch tubular handlebars, these bar risers feature dual points of rotation that allow you to pivot your handlebars up and back approximately 4 inches. This adjustment relieves the pressure that builds on on your wrists, forearms and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these barbacks will get you riding in comfort again.

    Is 4 inches too much displacement? We also carry Rox 2in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles and Rox 3in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in three finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $124.95

  6. Rox Anti-Vibration Handlebar Risers For 22mm Or 28mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles shown in machined aluminum

    Rox Anti-Vibration Handlebar Risers For 22mm Or 28mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles | 2in rise

    Rox Anti-Vibration Handlebar Risers for 22mm or 28mm Bars on select BMW, Honda, Kawasaki, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Compatible both standard and oversized handlebars through use of a reducer, they feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

    These risers feature a shock damping component that both reduces the vibration felt at higher RPMs and can protect handlebar mounted components and rider during harder impacts.

    These Rox risers will mount on essentially any machine that has a handlebar that measures 7/8" or 1 1/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers. Additionally, due to the shock damping component, these handlebar risers require at least 1" of space below the bar where they currently clamp. If you don't have this space, you can use these other non-damping handlebar risers:

    Ride with less vibration and less pain today with these handlebar risers for 22mm or 28mm by Rox.

    Learn More
    $163.00

  7. Rox Handlebar Risers for 28mm (1-1/8in) Bars With Extended Stem For Yamaha FZ-09 '14-'15 & XT1200Z Super Tenere '14-'15

    Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 '14-'17 & XT1200Z Super Tenere '14-'17 | 2in rise

    Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 & XT1200Z Super Tenere allow you to adjust the position of your handlebars, instead of adjusting your posture to them. The extended stem at the bottom of the risers is specifically designed for the angled bar clamps of the FZ-09 and the XT1200Z; The extension ensures that there is enough surface area for a secure mount. These ergonomics enhancing risers feature dual rotation points that allow you to pivot them up and back diagonally approximately 2in to relieve the pressure that can build up on your wrists, forearms, and neck. Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. Not only do they improve your riding position and comfort level, these barbacks look stylish on your machine. Learn More
    $119.95

  8. SW-MOTECH Handlebar riser set for BMW R1200GS '04-'07, R1200GS Adventure '06-'07 & F800GS Adventure '14-'17 | 30mm - Black

    SW-MOTECH Handlebar riser set for BMW R1200GS '04-'07, R1200GS Adventure '06-'07 & F800GS Adventure '14-'17 | 30mm - Black

    Provides a more upright, comfortable riding position by raising the original 1-1/8in (28mm) diameter tubular handlebar by 30mm (1.2in). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Also perfect for use with oversize handlebars (ProTaper, Magura, etc.). Learn More
    $135.95

  9. Rox Handlebar Risers For 1 1/4in Bars On BMW R1200GS LC '13-'16 shown in clear anodized

    Rox Handlebar Risers For 1 1/4in Bars On BMW R1200GS LC '13-'16 | 2in rise

    Rox Handlebar Risers For 1-1/4in  Bars On BMW R1200GS LC '13-'16 allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for 2013 and newer, liquid cooled R1200GS motorcycles with 32mm handlebars, these risers feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

    If you have an older R1200GS, you can not use these risers. Purchase these instead:

    Ride with less pain today with these handlebar risers for BMW R1200GS LC '13-'16 by Rox.

    Learn More
    $135.00

  10. SW-MOTECH 20mm Bar Risers for 28mm Handlebars (shown in powder coated silver)

    SW-MOTECH 20mm Bar Risers for 28mm Handlebars

    The SW-MOTECH 20mm bar risers for 28mm handlebars mount to the factory bar clamp offering a more relaxed seating position and improved comfort. High quality CNC machined aluminum is powder coated in your choice of black or silver for an attractive appearance that also improves durability and corrosion resistance. These handy bar risers move the handlebar higher up in the factory bar clamp to position the rider at a more comfortable angle that reduces neck, shoulder and upper back Fatigue. It only takes a few degrees to position your head properly over your shoulders for more support so you can enjoy a more comfortable body position. Add these 20mm bar risers from SW-MOTECH and significantly increase your smiles per gallon! Learn More
    $127.95

  11. SW-MOTECH Handlebar risers for BMW R1200GS '08-'12 & R1200GS Adventure '08-'13 | 30mm

    SW-MOTECH Handlebar risers for BMW R1200GS '08-'12 & R1200GS Adventure '08-'13 | 30mm

    Provides a 30mm rise in handlebar mount height for the BMW R1200GS '08-'12, R1200GS Adventure, '08-'13 & HP2. Does not fit earlier models. Silver matches original handlebar attachment hardware. Learn More
    $86.95

  12. Kaoko Throttle Lock Cruise Control for Can-Am Spyder Roadster (with aftermarket Custom Dynamics or No Magic Neon handlebar riser)

    Kaoko Throttle Lock Cruise Control for Can-Am Spyder Roadster (with aftermarket Custom Dynamics or No Magic Neon handlebar riser)

    This Kaoko Cruise Control is purpose-built for the Can-Am Spyder with No Magic Neon/Custom Dynamics handlebar riser installed. The throttle lock consists of a friction nut with an integrated replacement handlebar-end weight.
    Learn More
    $141.95

  13. Standard Motorcycle Comfort Package for BMW R1200GS '10-'12 & R1200GS Adventure '11-'13

    Standard Motorcycle Comfort Package for BMW R1200GS '10-'12 & R1200GS Adventure '11-'13

    The Twisted Throttle Standard Motorcycle Comfort Package for your motorcycle will help to increase your touring stamina. We have tapped into our vast riding experience to assemble the best products dedicated to increasing the enjoyment of your ride. Designed specifically for your motorbike, this ready-to-order ergonomics package is not only comfortable but also functional. Learn More

    From: $83.95

    To: $405.85

  14. SW-MOTECH Left & Right Handlebar risers for Yamaha FJR1300 '01-'05 | 25mm

    SW-MOTECH Left & Right Handlebar risers for Yamaha FJR1300 '01-'05 | 25mm

    Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch) and rotating them toward the rider by 15 degrees. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Learn More
    $103.95

  15. SW-MOTECH Handlebar Risers for Kawasaki Versys 650 '07-'14 | Silver - 20mm

    SW-MOTECH Handlebar Risers for Kawasaki Versys 650 '07-'14 | Silver - 20mm

    Includes one-piece handlebar riser block (20mm rise height) in silver, and longer screws.

    Learn More
    $74.95

  16. SW-MOTECH Handlebar Risers Kawasaki ER-6f '09-'16, ER-6n '09-'11 & Ninja 650R '09-'11 | Black - 20mm

    SW-MOTECH Handlebar Risers Kawasaki ER-6f '09-'16, ER-6n '09-'11 & Ninja 650R '09-'11 | Black - 20mm

    Includes one-piece handlebar riser block (20mm rise height) in black, and longer screws.

    No modification of brake lines is necessary for installation. Learn More
    $74.95

  17. SW-MOTECH Handlebar Risers for Yamaha XT1200Z Super Tenere '10-'13 | 25mm

    SW-MOTECH Handlebar Risers for Yamaha XT1200Z Super Tenere '10-'13 | 25mm

    Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. No change of control cables, wiring, or hoses is required. It is recommended that the installer should check for adequate cable/wiring/hose slack during installation. Learn More
    $89.95

  18. SW-MOTECH 20mm Handlebar Risers for Kawasaki Z800 '12-'16

    SW-MOTECH 20mm Handlebar Risers for Kawasaki Z800 '12-'16

    Includes one-piece handlebar riser block (20mm rise height). Powdercoated black, includes longer screws.

    Uses original spacer No modification of brake lines is necessary for installation. Learn More
    $74.95

  19. SW-MOTECH handlebar risers for Kawasaki Z1000 '07-'09, Z750 '04-'06, Z750R '11-'12 & Z750S '04-'06 | 20mm rise - Black

    SW-MOTECH handlebar risers for Kawasaki Z1000 '07-'09, Z750 '04-'06, Z750R '11-'12 & Z750S '04-'06 | 20mm rise - Black

    Includes:

    • Bar Riser Mounts
    • Mounting instructions

    Uses original spacer

    Requires no change of any control cables, wiring, or hoses. 

    Learn More
    $74.95

  20. Handlebar risers Kawasaki EX250 - pair

    Handlebar risers Kawasaki EX250 - pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. Learn More
    $89.95

  21. Handlebar risers Suzuki GSX1300R Hayabusa, '00-'07 - pair, 1.25-inch height

    Handlebar risers Suzuki GSX1300R Hayabusa, '00-'07 - pair, 1.25-inch height

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This is double the riser height of part# S122. This will help to relieve wrist and neck pain on long rides. We recommend rerouting the choke cable to remove cable tension when the handlebars are turned to full right or left. Learn More
    $149.95

  22. Handlebar risers Kawasaki W650, all years

    Handlebar risers Kawasaki W650, all years

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back approximately 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. Learn More
    $74.95

  23. Handlebar risers for Suzuki GSX1300R Hayabusa '08-'17 | pair

    Handlebar risers for Suzuki GSX1300R Hayabusa '08-'17 | pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This is double the riser height of part# S222. This will help to relieve wrist and neck pain on long rides. Learn More
    $149.95

  24. GENMAR Handlebar risers for Kawasaki ZX6R '95-'97

    GENMAR Handlebar risers for Kawasaki ZX6R '95-'97

    The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $69.95

  25. GENMAR Handlebar risers for Kawasaki ZX11 Ninja '89-'01 & ZZR1100 '89-'01

    GENMAR Handlebar risers for Kawasaki ZX11 Ninja '89-'01 & ZZR1100 '89-'01

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $109.95

  26. Handlebar risers (Suzuki Boulevard C90 / VL1500 LC Intruder Volusia)

    Handlebar risers (Suzuki Boulevard C90 / VL1500 LC Intruder Volusia)

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (37mm) and back 1" and (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $89.95

  27. Handlebar risers (Triumph cruisers, with 1" handlebars)

    Handlebar risers (Triumph cruisers, with 1" handlebars)

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $74.95

  28. Handlebar risers (Triumph Sprint, '91- / Trident 750 & 900, '91- / Trophy 900 & 1200, '91-95)

    Handlebar risers (Triumph Sprint, '91- / Trident 750 & 900, '91- / Trophy 900 & 1200, '91-95)

    The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $109.95

  29. Handlebar risers (Triumph Trophy 900 & 1200, '96-

    GenMar Handlebar Risers for Triumph Trophy 900 & 1200, '96-

    The Gen-Mar handlebar risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Requires NO change of control cables, wiring, or hoses. Learn More
    $109.95

  30. GENMAR Handlebar risers for Kawasaki GPZ1100 '95-'96

    GENMAR Handlebar risers for Kawasaki GPZ1100 '95-'96

    The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $109.95

  31. GENMAR Handlebar risers for Kawasaki ZX6R '98-'99 & ZX9R Ninja '98-'99

    GENMAR Handlebar risers for Kawasaki ZX6R '98-'99 & ZX9R Ninja '98-'99

    The risers are placed between the fork crown and the handlebars to raise the bars up 7/8" (22mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $69.95

  32. GENMAR Handlebar Risers for Kawasaki ZX9R Ninja '94-'97

    GENMAR Handlebar Risers for Kawasaki ZX9R Ninja '94-'97

    The risers are placed between the fork crown and the handlebars to raise the bars up 5/8" (16mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $69.95

  33. GENMAR Handlebar risers for Kawasaki ZX14R Ninja '06-'17

    GENMAR Handlebar risers for Kawasaki ZX14R Ninja '06-'17

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 inch (25mm) and back 5/8 inch (16mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $109.95

  34. GENMAR Handlebar risers for Honda VTR1000F Superhawk '97-'05 & VTR1000SP1 Firestorm '99-'01

    GENMAR Handlebar risers for Honda VTR1000F Superhawk '97-'05 & VTR1000SP1 Firestorm '99-'01

    The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $109.95

  35. Twisted Throttle handlebar clamp bolt replacement kit (four M8x55mm bolts)

    Twisted Throttle handlebar clamp bolt replacement kit (four M8x55mm bolts)

    For use with LEH.00.039.102 bar risers on Ducati motorcycles OR LEH.00.039.103 bar risers on Triumph motorcycles. Learn More
    $6.00

FILTER OPTIONS

Grid List

per page

Items 36 to 70 of 163 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5