x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Search results for 'tank'

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 88 total

Page:
  1. 1
  2. 2
  3. 3
  1. MRA Double-Bubble RacingScreen Windshield for BMW K1200S '05-'08 & K1300S '09-'16

    MRA Double-Bubble RacingScreen Windshield for BMW K1200S '05-'08 & K1300S '09-'16

    The original "double-bubble" racingscreen! Available in clear, smoke gray and gloss black. Learn More
    $106.95

  2. SW-MOTECH Crash Bars Engine Guards for Ducati Multistrada 1200 Enduro

    SW-MOTECH Crash Bars Engine Guards for Ducati Multistrada 1200 Enduro '16-'17

    The SW-MOTECH crash bars engine guards for Ducati Multistrada 1200 Enduro protect the most critical and vulnerable components from contacting the ground in the event of a tip over, fall or slide. The main section is constructed using strong tubular steel 27mm in diameter and even the dual cross bar supports utilize hearty 22mm steel for superior lateral strength. These exceptional crash bars are designed and engineered in Germany for superior functionality and build quality to keep your Ducati as safe as possible during an incident. Installation is 100% bolt on and requires no sanding, drilling, cutting, welding or any other modifications for fitment. Preserve your Multistrada Enduro from damage and install a set of crash bars from the protection experts at SW-MOTECH! Learn More
    $293.95

  3. SW-MOTECH STEEL-RACK To Fit Many Top Case Styles For Yamaha XT1200Z Super Tenere

    SW-MOTECH STEEL-RACK To Fit Many Top Case Styles For Yamaha XT1200Z Super Tenere '11-'17

    The SW-MOTECH STEEL-RACK is specifically designed for the Yamaha XT1200Z Super Tenere. This top rack will support a wide selection of soft or hard luggage on the back end of your motorcycle. Constructed out of robust steel and black powder coated this rear rack provides a durable, corrosion resistant and secure mounting solution for your top case or rear bag. Choose from the above drop-down menus for either an adapter plate that attaches to a GIVI Monokey or Monolock, TraX EVO or TraX ADV, general soft luggage or even a tank bag. This rear rack also features laser cut holes that make the perfect attachment points for tie-down straps or bungee cords used to secure cargo. Grab this STEEL-RACK to have the right top case mounting solution available from the luggage experts at SW-MOTECH Germany.

    Learn More
    $155.95

  4. Standard Motorcycle Luggage Package for Honda NC700X & NC750X

    Standard Motorcycle Luggage Package for Honda NC700X '12-'15 & NC750X '14-'15

    We have taken the legwork out of selecting a luggage set up for your Honda NC700X ’12-’15 or NC750X ’14-15 by providing the Standard Motorcycle Luggage Package. With quality aluminum 37 liter side cases, quick release side carrier mounting racks, case ready top rack, quick release luggage carrier, 60 liter dry bag and an expandable tank bag, you will be able to carry your essentials securely for your next adventure. Whether your next ride is to Pakistan or just the packy, you will be able to carry what you need with the Standard Motorcycle Luggage Package. Learn More

    From: $69.95

    To: $1,767.50

  5. SW-MOTECH Crash Bars Engine Guards Triumph Tiger 800

    SW-MOTECH Crash Bars Engine Guards for Select Triumph Tiger 800 Motorcycles

    Designed to deliver the utmost protection in the event of a crash or drop, this SW-MOTECH Crash Bars Engine Guard is crafted from 22 & 27mm steel pipe for strength and stability. This unit protects the tank, fairing and other vulnerable components on the motorcycle. Each engine guard frame has been engineered to match the curvature of the bike model, mounting to current anchor points - so drilling or welding won't be necessary! Black powder coated for durability, these bars provide protection from the elements and give your bike a badass look.

    Learn More
    $247.50

  6. SW-MOTECH ALU-RACK Top Rack to fit Many Top Case Styles for Triumph Speed Triple R '16 & Speed Triple S '16
    $191.95

  7. SW-MOTECH ALU-RACK to fit Many Top Case Styles for Yamaha FZ-10 '17
    $127.95

  8. SW-MOTECH ALU-RACK to fit Many Top Case Styles for KTM 1290 Super Duke GT '17
    $165.95

  9. SW-MOTECH ALU-RACK to fit Many Top Case Styles for Honda NC700X
    $167.95

  10. SW-MOTECH ALU-RACK to fit Many Top Case Styles for Ducati Multistrada 1200 Enduro
    $255.95

  11. SW-MOTECH Passenger Seat Rack for Honda Africa Twin CRF1000L

    SW-MOTECH Passenger Seat Rack for Honda Africa Twin CRF1000L '16-'17

    The SW-MOTECH passenger seat rack for Honda Africa Twin CRF1000L directly replaces the factory pillion seat with a CNC machined aluminum plate offering a strong foundation for mounting luggage. Lightweight aluminum is finished in an easy to clean black powder coating that also provides corrosion protection. This versatile seat rack securely bolts to the tail with a specially designed frame that transfers weight directly to the subframe. High quality German design produces a precise fit that compliments original lines of the motorcycle. Multiple tie-down points make attaching and securing tie down straps convenient. No drilling, cutting welding or any other permanent modifications required for fitment. Make efficient use of space on your Africa Twin and install a passenger seat rack from SW-MOTECH.

    Learn More
    $178.95

  12. SW-MOTECH Seat Rack for KTM 1290 Super Duke GT '17

    SW-MOTECH Seat Rack for KTM 1290 Super Duke GT '17

    The SW-MOTECH passenger seat rack for KTM 1290 Super Duke GT '17 is a direct replacement for the original pillion seat offering a CNC machined aluminum plate as a secure surface for mounting luggage. Strong laser cut alloy construction is finished in a durable black powder coating for superior aesthetics and corrosion protection. This highly versatile seat rack uses the motorcycles original ignition key to lock and unlock the unit in the same way the passenger seat operates. Superior German design provides a precise fit that perfectly compliments the contour of the tail. Generous sized tie-down points make attaching and securing tie down straps convenient, even while already loaded with gear. Permanent modifications are not necessary for fitment. Add the SW-MOTECH passenger seat rack on your KTM and utilize all that unused space for more gear!

    Learn More
    $178.95

  13. SALE
    SW-MOTECH STEEL-RACK To Fit Many Top Case Styles For KTM 1050 Adventure & 1190 Adventure

    SW-MOTECH STEEL-RACK To Fit Many Top Case Styles For KTM 1050 Adventure '15-'16 & 1190 Adventure '13-'16

    Provide a secure mounting point for carrying soft bags as well as the ability to attach many types of motorcycle top cases or removable luggage to your KTM 1190 or 1050 Adventure with the SW-MOTECH STEEL-RACK. Precision cut from rugged steel with a long lasting block powder coated finish, this rack features pre-drilled mounting points aligned to fit adapter hardware that accepts most popular hard cases like GIVI Monokey and Monolock, SW-MOTECH TraX EVO or ADV as well as Shad. This carrier also features mounting points for a Tank Bag Adapter to mount suitable SW-MOTECH Tank Bags on the rear of your motorbike as well as optional soft luggage expansion plates that increase the already large surface area for mounting very large bags. With plenty of points for strapping soft luggage and the ability to mount many types of hard luggage, the STEEL-RACK by SW-MOTECH could be the one of the most useful additions you could find for your motorcycle.

    Learn More
    $159.95

  14. SW-MOTECH STEEL-RACK for BMW F650GS, F650GS Dakar, G650GS & G650GS Sertao

    SW-MOTECH STEEL-RACK to fit Many Top Case Styles for BMW F650GS ’04-‘06, F650GS Dakar ’04-‘07, G650GS ’11-‘16 & G650GS Sertao ’12-‘15

    Mount soft luggage or many styles of top cases conveniently and securely with the SW-MOTECH STEEL-RACK for BMW F650GS ’04-‘06, F650GS Dakar ’04-‘07, G650GS ’11-‘16 and G650GS Sertao ’12-’15. With laser cut steel construction, pre-drilled hard luggage adapter plate mounting holes and plenty of strap tie down points for soft bags, this rack is as versatile as it is strong. To mount your favorite top case, simply line up and bolt on the available adapter, clip on your hard luggage, and you are ready to rip it up with your stuff safe and secure. Take what you want, where you want with the SW-MOTECH STEEL-RACK. Learn More
    $153.95

  15. SW-MOTECH ALU-RACK to fit Many Top Case Styles for Honda Africa Twin CRF1000L '16

    SW-MOTECH ALU-RACK to fit Many Top Case Styles for Honda Africa Twin CRF1000L '16-'17

    The SW-MOTECH ALU-RACK to fit many top case styles for Honda Africa Twin increases utility and cargo carrying capacity by providing a secure foundation for adding soft or hard luggage. High quality CNC machined aluminum construction features canted edges and beveled sides which eliminate chafing and snagging from sharp corners. The low profile design perfectly compliments the tail and mounts securely to existing points on the subframe for a factory appearance. This elegant ALU-RACK is also finished in an attractive black powder coating to improve durability and corrosion resistance. Add the optional Quick-Release Soft Luggage Adapter to provide even more support for a drybag or fit a tank bag by adding an optional tank ring mount. Case specific adapter plates are available (from the drop down menu above) to fit hard luggage from our most popular brands. Quick release plates can be mounted and removed without tools so your motorcycle maintains a clean appearance for local cruising without luggage. Increase the versatility of your Africa Twin and install an ALU-RACK from SW-MOTECH!

    Learn More
    $127.95

  16. R&G Tank Traction Grips For Suzuki GSX-R1000 '03-'04 | 2 Piece Kit

    R&G Tank Traction Grips For Suzuki GSX-R1000 '03-'04 | 2 Piece Kit

    R&G tank traction grips for Suzuki GSX-R1000 help you gain better control and increased confidence when braking and cornering. The super sticky pads are crafted using a low profile synthetic rubber with a self-adhesive coating on one side and a textured surface on the other. A uniquely designed grain gives you significantly more grip but don't worry, it won't ruin your gear. If you're able to maintain a decent position you can reduce fatigue as well as alleviate pressure felt on neck, arms, wrists and shoulders. The R&G tank traction pads are available in black or clear. Learn More
    $33.44

  17. R&G Tank Traction Grips For Suzuki GSX-R600 '11-'16 & GSX-R750 '11-'16 | 2 Piece Kit

    R&G Tank Traction Grips For Suzuki GSX-R600 '11-'17 & GSX-R750 '11-'17 | 2 Piece Kit

    R&G tank traction grips for Suzuki GSX-R600 & GSX-R750 are a great accessory to add when you want a better hold as well as increased confidence when braking and cornering. The super sticky pads are crafted using a soft low profile synthetic rubber with a unique, extra-grippy texture on one side and a self-adhesive coating on the other. The specially designed grain supports better traction but is also made so that it won't ruin your gear. When a proper body position is maintained you benefit from reduced fatigue and can take some of that nagging pressure off of your neck, arms, wrists and shoulders. The R&G tank traction pads come in black or clear. Learn More
    $33.44

  18. R&G Tank Traction Grips For Honda CBR300R | 4 Piece Kit

    R&G Tank Traction Grips For Honda CBR300R '14-'17 | 4 Piece Kit

    Gain better control and increase your confidence when braking and cornering by adding the R&G tank traction grips to your CRB300R. The low profile synthetic rubber pads feature a textured surface on one side and a super sticky self-adhesive coating on the other. The grain helps you hold your seating position without tearing up your gear and the adhesive won’t damage your paint. By increasing your ability to maintain your seat alleviates pain and reduces fatigue. This four piece precision cut kit is just what you need to enhance your ride. Installing the R&G tank traction pads are easy and they come in your choice of black or clear.

    Learn More
    $38.40

  19. SW-MOTECH ALU-RACK To Fit Many Top Case Styles For Honda CB500F ’16 & CBR500R ’16 | Black

    SW-MOTECH ALU-RACK To Fit Many Top Case Styles For Honda CB500F '16-'17 & CBR500R '16-'17 | Black

    The SW-MOTECH ALU-RACK is crafted out of high-strength CNC machined aluminum and features beveled edges to prevent surround objects from snagging on the corners.  No matter the adventure both your hard and soft luggage options will be securely supported by low profile subframe arms.  This ALU-RACK is finished with a corrosion resistant and durable black powder coat.  To increase the surface are of this rear rack to accommodate those large dry bags you can add the Quick-Release Soft Luggage Adapter or grab the ALU-RACK Tank Ring to attach a tank bag to the rear of your motorcycle.   

    To mount hard top luggage, just grab the appropriate top case adapter plate from the drop down menu.  You can add a GIVI/Kappa Monokey or Monolock, TraX Adventure, TraX ALU-BOX, Hepco-Becker or Shad top case to this SW-MOTECH ALU-RACK.  Quickly release your top case and remove the adapter plate without tools and your motorcycle goes back to local cruising mode.  Increase those miles by being able to carry more rider essentials.

    Learn More
    $165.95

  20. R&G 6 Piece R&G Tank Traction Grips for Triumph 675 Daytona & Street Triple

    R&G Tank Traction Grips for Triumph Daytona 675 '13-'17 & Street Triple '13-'17 | 6 Piece Kit

    These R&G tank traction grips for Triumph Daytona 675 & Street Triple are designed to help improve connection and grip to your motorcycle while also protecting the paint job on your bike. The unique texture of the low-profile, rubber pads was designed specifically to assist in better control of the bike, encouraging you to maintain a more stable body position while braking and cornering. With this 6 piece traction grip kit, you'll also benefit from improved stamina and better focus on the road rather than worrying about sliding around on the tank... sounds like winning to us. Learn More
    $44.59

  21. R&G Tank Traction Grips For Honda CB500F

    R&G Tank Traction Grips For Honda CB500F '16-'17 & CBR500R '16-'17 | 2 Piece Kit

    Get a boost in confidence and control in handling your motorcycle by adding the R&G tank traction grips. Slipping around on your seat during braking and turning maneuvers is tiring and can cause discomfort on your neck, wrists, forearms and shoulders. This set of grippy pads will help you maintain your seating position, therefore reducing fatigue and aches.

    To install the grips, just peel off the backing and stick the two pieces to your tank. The traction pads are precision cut and shaped to give you an integrated look on your motorcycle. These grips feature a uniquely designed texture that is soft and durable and will not damage your gear. The paint friendly adhesive will stay where you put it and not scuff up your finish. This set of R&G tank traction grips are just what you need to enhance your ride.

    Learn More
    $33.44

  22. R&G Tank Traction Grips For Kawasaki Z125 & Z125 PRO | 2 Piece Kit

    R&G Tank Traction Grips For Kawasaki Z125 '17 & Z125 PRO '17 | 2 Piece Kit

    The R&G tank traction grips have been designed to assist the rider in improving the control of their motorcycle by enabling them to maintain a more stable body position during braking and cornering. These precision cut pieces of synthetic rubber feature a textured surface on one side and a super sticky yet paint-friendly adhesive on the back. The grain helps you grasp that otherwise slippery tank and the adhesive makes the grips stay in place even when it starts to rain. By having the ability to maintain your seat you will alleviate pain on your neck, wrists, arms and shoulders while also feeling less tired after a ride. Grab the R&G tank traction grips and get a comfort and confidence boost on your Z125. Learn More
    $33.44

  23. R&G Tank Traction Grips For Honda CBR1000RR Fireblade '08-'11 Race Setup | 4 Piece Kit

    R&G Tank Traction Grips For Honda CBR1000RR Fireblade '08-'11 Race Setup | 4 Piece Kit

    This set of R&G tank traction grips will increase comfort and control on your CBR1000RR Fireblade by giving you something to grasp onto other than that slippery seat and fuel tank. The pieces are precision cut to suit your motorcycle and feature a textured surface that helps hold you in your seat. By being able to maintain your seating position you do not have to do as much work maneuvering your body while braking and cornering. The additional purchase alleviates pain on wrists, arms and shoulders while also reducing fatigue. Installation is super simple and the grips come in your choice of either black or clear. Grab the R&G tank traction grips to focus on the finish line rather than combating your seat. Learn More
    $38.40

  24. R&G Tank Traction Grips For Suzuki SV650

    R&G Tank Traction Grips For Suzuki SV650 '17 | 2 Piece Kit

    Precision cut to the shape of your Suzuki SV650 the R&G tank traction grips will give you more control during braking and cornering maneuvers. Fabricated using a low profile synthetic rubber the pieces feature a textured surface that holds your body position without damaging your gear. Maintaining your seat means less pressure on hands, wrists neck and forearms. You will be able to ride longer and feel less tired with these awesome grips. The traction pads stick to your tank via a paint friendly adhesive and are available in a choice of black or clear. Learn More
    $37.95

  25. R&G Tank Traction Grips for Aprilia RSV1000 & Tuono

    R&G Tank Traction Grips for Aprilia RSV1000 '04-'10 & Tuono '06-'10 | 2 Piece Kit

    Ride with more control and confidence while protecting the finish of your motorcycle with R&G tank traction grips designed specifically for your Aprilia RSV1000 or Tuono. With a soft yet durable texture, these pads reduce slipping while holding your body position resulting in less fatigue, more feedback and increased riding precision. With high strength self-adhesive backing, this kit is easy to install and engineered to stay put for years of hard riding. Pick up a set of black or ultra-clear tank traction grips by R&G and ride your motorcycle to its full potential. Learn More
    $33.44

  26. Techspec Gripster Set For KTM RC390 ’15-’16 | 5 Piece Kit

    TechSpec Gripster Tank Grips for KTM RC 390 '15-'17 | 5 Piece Kit

    Get the TechSpec Gripster Tank Grips for your KTM RC 390 and you'll experience solid tank grip without any gear snagging.

    Stop slipping during hard braking, acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and stay in place via a super sticky paint friendly adhesive that is pre-applied to the backs of the pads. These handy Gripster tank grips will increase long distance comfort and reduce fatigue by allowing the lower body to provide more support, relieving pressure on hands, wrists, arms and shoulders.

    To install, simply clean your tank and peel off the backing on the grips and stick them to your tank. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.

    Learn More
    $69.95

  27. R&G Tank Traction Grips For Select Triumph Motorcycle Models | 6 Piece Kit

    R&G Tank Traction Grips For Select Triumph Speed Triple Motorcycle Models | 6 Piece Kit

    Enhance your ability to control your motorcycle by adding the R&G tank traction grips, available in either black or clear. These precision cut pads are easy to install with a high-strength, self-adhesive and paint friendly backing, which leaves you with an integrated look. The soft yet durable texture gives your legs something to grasp (without damaging your gear), rather than relying upon that slippery tank and seat. By increasing positive contact with your motorcycle you are easing the strain and fatigue felt on arms, wrists, neck and shoulders felt during braking and cornering. Protect your tank and boost your riding confidence with the R&G tank traction grips.

    Learn More
    $44.59

  28. R&G Tank Traction Grips For Kawasaki ZX6R 636 | 4 Piece Kit

    R&G Tank Traction Grips For Kawasaki ZX6R 636 '13-'17 | 4 Piece Kit

    Enhance your maneuvering and handling ability on your ZX6R 636 with the R&G tank traction grips. These super grippy pads are fabricated using a durable yet soft synthetic rubber and textured to aid you in maintaining your seating position. Cornering and braking on your motorcycle normally require you to adjust your seat or trying to grip that slippery tank. By adding the grips you will be reducing the amount of work you have to do, grasp them with your legs and feel the difference. Installation is super easy, just peel off the backing and stick the grips to your tank. The pre-applied self-adhesive is strong but will not damage your motorcycle's finish. Grab the R&G tank traction grips and gain comfort and confidence on your ride.

    Learn More
    $38.40

  29. R&G Tank Traction Grips for Kawasaki ZX10R '11-'15 | 4 Piece Kit

    R&G Tank Traction Grips for Kawasaki ZX10R '11-'15 | 4 Piece Kit

    Bolster your maneuvering and handling ability with the R&G tank traction grips for Kawasaki ZX10R. These wicked grippy pads are crafted using a durable yet soft synthetic rubber with a specially designed texture to aid you in maintaining your seating position. Cornering and braking on your motorcycle can shake your confidence when you're sliding around on your tank. The unique texture of the self-sticking pads helps you to grab hold which, subsequently, can help you keep a better riding posture without the additional worry of ripping up your riding gear. You'll feel the difference instantly. Installation is a cinch, just peel off the backing and stick the grips to your tank. The pre-applied self-adhesive will stay put but will not damage the paint on your beast. Grab the R&G tank traction grips and gain comfort and confidence on your ride.

    Learn More
    $38.40

  30. R&G Tank Traction Grips For Honda CBR1000RR Fireblade '12-'16 Race Setup | 4 Piece Kit

    R&G Tank Traction Grips For Honda CBR1000RR Fireblade '12-'16 Race Setup | 4 Piece Kit

    Discover what the R&G tank traction grips can do for your next day on the race track with your Honda CBR100RR Fireblade. These grippy pads are crafted using a soft yet durable synthetic rubber and feature a textured surface on one side and a super sticky self-adhesive on the other. The grain aids you in maintaining your seating position alleviating pressure on wrists, neck, arms and shoulders while also reducing fatigue. This set of four precision cut grips install directly to your tank, just peel off the backing and stick. These pads match the shape of your tank, won’t tear up your gear or damage your awesome paint job and are available in black or clear. Bolster your comfort and confidence in your handling skills by grabbing the R&G tank traction grips.

    Learn More
    $38.40

  31. R&G Tank Traction Grips For BMW R1200GS, R1200GS Adventure, R1200GS LC, R1200GS LC Adventure | 2 Piece Kit

    R&G Tank Traction Grips For BMW R1200GS '08-'12, R1200GS Adventure '08-'13, R1200GS LC '13-'17 & R1200GS LC Adventure '14-'17 | 2 Piece Kit

    Maximize your riding capabilities by adding a set of the R&G tank traction grips. These pads will help you grasp that otherwise slippery fuel tank enabling you to gain a more comfortable seat and maintain a proper body position. R&G fabricates the pads using a soft but durable synthetic rubber and has added a uniquely designed texture to one side and a super strong yet paint-friendly self-adhesive on the other. The grain helps you hold your seat when gripped but won’t tear up your gear. Concentrate on the road ahead rather than constantly having to adjust your seat during braking, acceleration and cornering. The R&G tank traction grips are precision cut to the shape of your motorcycles tank and available in either black or clear.

    Learn More
    $33.44

  32. R&G Tank Traction Grips For Triumph Tiger 1050 Sport '16 | 2 Piece Kit

    R&G Tank Traction Grips For Triumph Tiger 1050 Sport '16 | 2 Piece Kit

    Enhance handling, braking and comfort by having the ability to grip your Tiger 1050 Sport and not slide around with the R&G tank traction grips. This set of low profile and precision cut rubber pieces help you maintain proper body position, easing hand, wrist, forearm and upper body pain and fatigue. These traction pads stick to your tank with a paint friendly adhesive and the texture is gentle on your gear. Available in black or clear, this two piece kit is just what you need to take on those twists and turns with confidence.

    Learn More
    $37.95

  33. R&G Tank Traction Grips For Kawasaki ZX6R | 2 Piece Kit

    R&G Tank Traction Grips For Kawasaki ZX6R '09-'12 | 2 Piece Kit

    Take your ZX6R for a more comfortable and easier handled rip with the R&G tank traction grips. This set of pads is precision cut to the shape of your tank providing you with an integrated look and grip where you need it most. R&G uses a durable yet soft synthetic rubber that is texturized and helps hold you in your seat during braking and cornering but won't damage your gear. After installation (which is super easy) you will notice a reduction in fatigue and discomfort on your neck, wrists, arms and shoulders because you aren't constantly adjusting your seat. The grips attach to your tank via a paint-friendly, self-adhesive backing that stays where you put it. Grab the R&G tank traction grips to enhance your motorcycle riding confidence and comfort.

    Learn More
    $33.44

  34. R&G Tank Traction Grips For Honda Grom MSX125 | 2 Piece Kit

    R&G Tank Traction Grips For Honda Grom MSX125 '16 | 2 Piece Kit

    The R&G tank traction grips are just what you need to gain more control and comfort on your Grom. These soft yet durable pieces of synthetic rubber feature a texture that gives you something to dig your legs into without damaging your gear. The pads enable you to maintain proper body position decreasing fatigue and discomfort felt in neck, wrists, forearms and neck. Simple to install, the precision pre-cut grips have a high-strength and paint-friendly self-adhesive backing. Discover your true riding potential by adding the R&G tank traction grips.

    Learn More
    $33.44

  35. R&G Tank Traction Grips for BMW F800ST | 4 Piece Kit

    R&G Tank Traction Grips for BMW F800ST '06-'13 | 4 Piece Kit

    Provide enhanced contact between your legs and your motorcycle while protecting your paint finish with R&G tank traction grips for the BMW F800ST. With more feedback and increased body stabilization, your ride will be improved with more control, confidence and comfort. Easily applied, these high strength self-adhesive backed pads are precision cut to fit your motorcycle and will remain in place for years without damaging your paint. The durable but soft texture, available in black or ultra-clear, is leather friendly and gives just the right amount of stick, reducing fatigue on those long rides. Install tank traction grips by R&G before your next adventure to improve your riding experience. Learn More
    $33.44

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 88 total

Page:
  1. 1
  2. 2
  3. 3