x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Search results for 'covers'

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 164 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. NEW
    R&G Engine Case Cover Kit for Ninja 650 '17 & Z650 '17 | 2 Piece

    R&G Engine Case Cover Kit for Kawasaki Ninja 650 '17 & Z650 '17 | 2 Piece

    The R&G engine case cover kit for Kawasaki Ninja 650 '17 & Z650 '17 | 2 piece provides essential protection for the expensive and exposed sections of the motor in the event of a low side spill or tip over. Hearty 4mm Polypropylene construction absorbs impacts while also defending against abrasions that could easily compromise the integrity of the original equipment. These protective covers reduce the risk of wear through that can cause dirt and debris from getting into your motor and a loss of oil that ultimately result in engine failure. This small investment is highly recommended for street riders to prevent expensive in repairs, replacement or even getting stranded after an incident and waiting for a tow truck.

    Fitment is easy without the need for any permanent modifications. Simply mount the covers over the original cases using existing mounting holes without the need to replace gaskets or lose a drop of oil. Coverage of the entire clutch, timing and stator on the left and right side of the motor are protected from top to bottom. Keep your Kawasaki safe with the engine case cover kit from the protection experts at R&G!

    Learn More
    $157.55

  2. NEW
    R&G Race Series Engine Case Cover Kit for Ninja 650 & Z650 | 2 Piece

    R&G Race Series Engine Case Cover Kit for Kawasaki Ninja 650 '17 & Z650 '17 | 2 Piece

    The R&G race series engine case cover kit for Kawasaki Ninja 650' 17 & Z650 '17 provides critical protection for the vulnerable engine cases in the event of a low side spill or tip over. Robust 4mm Polypropylene is naturally impact absorbing and abrasion resistant to defend against cracking and wear through of fragile metals when your motorcycle goes down. The beefed-up race series covers enhance protection a step further than the standard covers using replaceable slider pucks at the impact face for even greater wear resistance. After a small slide, just the slider puck itself can be replaced so you can head back out on the track without missing a session. These essential case covers are highly recommended for track day enthusiasts but street riders can also benefit from the added protection.

    Installation is simple without the need for modifications, simply bolt on using existing mounting holes and there is no chance of spilling oil or need to replace any gaskets. This essential kit safeguards the entire clutch cover, timing case and stator case from top to bottom. Relied on by British Super Bike race teams and approved by the AMA as proper safety equipment that reduces the risk of damage to your motorcycle while also reducing the risk spilling oil on the track. Invest in serious protection for the heart of your Kawasaki with the race series engine case cover kit from the protection experts at R&G!

    Learn More
    $172.92

  3. R&G Race Series Engine Case Cover for Yamaha YZF R6 | Right Side Crankcase

    R&G Race Series Engine Case Cover for Yamaha YZF R6 ‘08-’16 | Right Side Crankcase

    Protect the vulnerable crankcase on your motorcycle with the R&G Race Series Engine Case Cover for your Yamaha YZF R6. Featuring a replaceable High Density Polypropylene slider puck that is designed to take the brunt of the contact, the protector is constructed of 4mm thick polypropylene. Keep your motorcycle rolling and prevent expensive repairs with a Race Series Engine Case Cover by R&G. Learn More
    $107.38

  4. R&G Race Series Engine Case Cover for Yamaha YZF R6 | Left Side Crankcase

    R&G Race Series Engine Case Cover for Yamaha YZF R6 '06-'16 | Left Side Crankcase

    Keep a drop from crippling your motorcycle by protecting the left side crankcase of your Yamaha YZF R6 with an R&G Race Series Engine Case Cover. With a 4mm molded polypropylene casing and a replaceable High Density Polypropylene slider puck located at the predominant contact point, this cover will offer superb protection on the street or track. Keep on riding with a race series engine case cover by R&G. Learn More
    $100.89 $100.89

  5. SALE
    Givi MT501 Metro-T Side Saddlebags (Pair) | 18 Liters/Bag

    Givi MT501 Metro-T Multilock Saddlebags (Pair) | 18 Liters/Bag

    Givi MT501S Metro-T Side Saddlebag (Ea.) | 18 Liters/Bag

    This pair of side saddlebags attach to your motorcycle using Givi’s Multilock system. The system allows for quick and easy adding/removal of the bags from the sideracks. The side bag holders are motorbike specific, and sold separately. The set of saddlebags are top loading, so you can get to your stuff quickly and not have to worry about it spilling out.

    The Givi MT501’s are made by thermoforming EVA, and then covering it with Guzy600D - PVC and PU. So if your looking for a durable side bag that resist stress cracking, water, and won’t fade rapidly, this ones for you.

    When you are out and about you want a luggage solution that will hold riding/trip essentials, keep them secure, and give protection from the elements. The MT501 has lock ready zippers, two options for carrying when off your motorcycle, included rain covers and side mesh pockets for extra storage. Additionally these side bags are expandable, and have reflective inserts on the sides for more visibility. Whether you are commuting to work, or heading out on a weekend adventure the Givi MT501 Metro-T’s have you covered.

    Dimensions: Height 14.2” x Depth 7.9” x Width 13.4”

    Learn More
    $520.00 $468.00

  6. NEW
    R&G Race Series Engine Case Cover for Ninja 650 & Z650 | Right Side

    R&G Race Series Engine Case Cover for Ninja 650 '17 & Z650 '17 | Right Side

    The R&G race series engine case cover for Kawasaki Ninja 650 '17 & Z650 '17 | right side provides essential protection for the engine case reducing the risk of damage in the event of a tip over or low side slide. Hearty 4mm Polypropylene construction is naturally impact absorbing and abrasion resistant to prevent breakage and wear through. The upgraded race series engine case cover enhances protection over the standard covers by adding replaceable slider pucks at the impact face. In the event of a small slide, just the slider puck itself can be replaced so you can head back out on the track without missing a session. This case cover is strongly recommended for track day enthusiasts needing an extra level of safety although street riders will benefit as well.

    Modifications are not required for installation, simply bolt on using factory mounting holes without the need to replace gaskets or lose a drop of oil. This right-side engine cover preserves the clutch cover from top to bottom on the throttle side of the motorcycle. Entrusted by British Super Bike race teams and approved by the AMA for reducing the risk of spilled oil on the track and minimizing possible of damage during an incident. Bolt-on the race series engine case cover from R&G and ride in confidence knowing your Kawasaki is protected!

    Learn More
    $96.06

  7. R&G Engine Case Cover For Ducati XDiavel '16-'17 & XDiavel S '16-'17 | LHS - Water Pump
    $60.70

  8. R&G Race Series Engine Case Covers for Ducati 959 Panigale '16 | 2 Piece Kit

    R&G Race Series Engine Case Covers for Ducati 959 Panigale '16-'17 | 2 Piece Kit

    AMA Racing Approved

    The R&G race series engine case covers for Ducati 959 Panigale '16 - 2 piece kit provides protection to reduce the risk of damaging the very vulnerable and exposed sections of the motor in the event of a fall or slide. Hearty molded polypropylene mounts directly over the factory unit without removing anything more than a few bolts. These essential engine covers are 4 mm thick to resist wear and impacts while an replaceable slider puck at the impact face provides even more protection to prevent wear through. The pucks themselves can be quickly replaced after an incident so you can get you back on the road/track without replacing the whole unit. Installing these case covers are simple as there is no need to replace gaskets or lose any oil. No drilling, cutting or sanding is required for proper fitment. Invest in proper protection for your Panigale and install a set of race series engine case covers from R&G! 

    Learn More
    $203.18

  9. R&G Right Side Engine Case Cover for Select Ducati Motorcycles

    R&G Right Side Engine Case Cover for Select Ducati Motorcycles

    The R&G Engine Case Covers are AMA Racing Approved and are designed to protect your expensive engine from unwanted damage.

    Learn More
    $97.87

  10. R&G Engine Case Covers for Ducati 959 Panigale

    R&G Engine Case Covers for Ducati 959 Panigale '16-'17 | 2 Piece Kit

    The R&G engine case covers for Ducati 959 Panigale - 2 piece kit protects the vulnerable sections of the motor to significantly reduce the risk of damage in a fall or slide. Robust 4mm polypropylene is utilized for its excellent abrasion resistance and impact absorption. The design of these low profile case covers maximizes cornering clearance and lean angles. Installation is simple and only requires removal of just a few bolts so each unit can go over the factory equipment without the need to replace gaskets or lose any oil. Don't let your bank account take the hit when your Panigale goes down, invest in a set of R&G engine case covers!

    Learn More
    $190.79

  11. NEW
    R&G Race Series Engine Case Cover for Ninja 650 '17 & Z650 '17 | Left Side

    R&G Race Series Engine Case Cover for Kawasaki Ninja 650 '17 & Z650 '17 | Left Side

    The R&G race series engine case cover for Kawasaki Ninja 650 '17 & Z650 '17 | left side provides superior protection for the engine case and reduces the risk of damage in the event of a tip over or low side slide. Rugged 4mm Polypropylene construction absorbs impacts and resists abrasion to prevent deterioration and wear through of the original equipment. This top of the line race series engine case cover provides a superior level of protection with the use of a replaceable slider puck at the impact face for even greater resistance to damage over the standard case covers. In the event of a small incident, just the slider puck itself can be replaced to restore maximum protection in only minutes. This case cover is highly recommended for track day enthusiasts seeking the highest level of protection and for street riders looking to safeguard their investment.

    Modifications are not required for fitment, simply bolt on using the original mounting holes without the need to replace a gasket or lose a drop of oil. This left-side engine cover preserves the entire stator cover from top to bottom on the clutch lever side of the motorcycle. Relied upon by British Super Bike race teams and approved by the AMA for reducing the risk of oil spills on the track and minimizing the possibility of damage during an incident. Invest in proper protection for your Kawasaki and install a race series engine case cover from the protection experts at R&G!

    Learn More
    $96.06

  12. R&G Engine Case Cover For Triumph Speed Triple R '16 & Speed Triple S '16 | LHS Alternator

    R&G Engine Case Cover For Triumph Speed Triple R '16 & Speed Triple S '16 | LHS Alternator

    AMA Approved Product

    Discover the R&G engine case cover for your Triumph Speed Triple. Manufactured using 4mm polypropylene this guard will protect your vulnerable and expensive to repair engine casing during a tip-over, crash or slide. R&G uses 3D scanning technologies to ensure this cover slides perfectly over your factory engine case. Just secure it to your motorcycle with the included replacement hardware and you’re ready to ride. Are you heading into a bend and need to do some serious leaning? Don’t worry, the engine case cover leaves plenty of clearance. Invest in high-quality protection with R&G.

    If you are looking for complete engine case protection for your Triumph Speed Triple R or S, you can grab the RHS engine case cover - RG.ECC0217BK.

    Learn More
    $84.86

  13. R&G Engine Case Cover Kit for Triumph Speed Triple S '16, Speed Triple R '16 & Tiger 1050 Sport '16 | 2 Piece

    R&G Engine Case Cover Kit for Triumph Speed Triple S '16, Speed Triple R '16 & Tiger 1050 Sport '16 | 2 Piece

    The R&G engine case cover kit for Triumph Speed Triple S '16, Speed Triple R '16 & Tiger 1050 Sport '16 - 2 piece adds protection for the vulnerable left and right side engine cases with impact absorbing and abrasion resistant armor. Hearty 4 mm thick polypropylene is molded to fit directly over the OEM motor casing to preserve it from scrapes or breakage that could cause wear through and oil loss. If you go down these essential engine case covers could save you from having to replace your expensive factory cases and an even more expensive rebuild if pieces of the cover break off in the motor. Installation is simple and does not require replacement of gaskets or loss of fluids. Invest in proper protection for your Triumph with this engine case cover kit from R&G! Learn More
    $156.10

  14. R&G Engine Case Covers for Ducati XDiavel & XDiavel S '16-'17 | 2 Piece Kit

    R&G Engine Case Covers for Ducati XDiavel & XDiavel S '16-'17 | 2 Piece Kit

    The R&G engine case covers for Ducati XDiavel & XDiavel S 2 piece kit significantly enhance protection to reduce damage during a tip over, fall or slide. Robust 4 mm thick polypropylene bolts directly to the original equipment with no need to replace gaskets or lose a drop of oil. These essential case covers absorb energy during an impact with the ground to minimize the chance of cracking while also resisting abrasion to prevent wear through during a slide. No drilling, cutting or any other modifications are necessary and replacement hardware is provided. Invest in proper protection for the heart of your Ducati with engine case covers from R&G! Learn More
    $143.71

  15. R&G Race Series Engine Case Cover for Yamaha YZF R6 | Right Side Oil Pump

    R&G Race Series Engine Case Cover for Yamaha YZF R6 ‘06-’16 | Right Side Oil Pump

    Protect the vulnerable oil pump on your motorcycle with the R&G Race Series Engine Case Cover for your Yamaha YZF R6. Constructed of 4mm thick polypropylene this protector features a replaceable High Density Polypropylene slider puck that is designed to take the brunt of the contact. Prevent expensive repair and keep your motorcycle rolling with a Race Series Engine Case Cover by R&G. Learn More
    $64.85 $64.85

  16. Standard Motorcycle Protection Package for BMW S1000RR

    Standard Motorcycle Protection Package for BMW S1000RR '15-'17

    We have put together this standard motorcycle protection package to help keep your BMW S1000RR from having severe damage on the road or track. With R&G accessories like carbon fiber lever guards to keep your controls from being clipped on close passes, frame sliders to keep vital components from contacting the road and a sidestand foot enlarger to keep your bike upright at the end of the day, you can ride with confidence. Ride to your potential with the standard motorcycle protection package put together by the riders here at Twisted Throttle. Learn More

    From: $46.10

    To: $321.60

  17. R&G Engine Case Cover For Ducati XDiavel & XDiavel S '16-'17 | RHS - Clutch

    R&G Engine Case Cover For Ducati XDiavel & XDiavel S '16-'17 | RHS - Clutch

    Constructed out of 4mm polypropylene the R&G engine case cover could make the difference in having to head home or preferably continuing your ride after a spill. This guard bolts directly over the original clutch, safeguarding it against damage during impacts and abrasion during a tip over, fall or slide. Longer bolts are provided to make installation a breeze. 3D scanning technologies are used to closely examine your motorcycle to ensure after being molded the cover fits perfectly. Prevent being stuck in a shop and an expensive repair bill with high-quality and great looking protection from R&G. Learn More
    $97.87

  18. R&G Frame Insert for MV Agusta Brutale 1090 '14-'16 | Lower Right Side

    R&G Frame Insert for MV Agusta Brutale 1090 '14-'16 | Lower Right Side

    The R&G frame insert for MV Agusta Brutale 1090 '14-16 | lower right side prevents dust, dirt and debris from contaminating exposed mounting hardware while also providing a cleaner, more "finished" appearance. Precision machined High Density Polyethylene is the same abrasion resistant and impact absorbing material used in frame sliders for reliable protection. This handy little frame insert is intended for covering up the lower right side mounting hole behind the rear brake lever. Installation is very simple and should take only a minute or two without the need for any permanent modifications. Properly protect your Italian beauty with an R&G frame insert for the lower right side! Learn More
    $25.39

  19. NEW
    R&G Engine Case Cover for Kawasaki Ninja 650 '17 & Z650 '17 | Right Side

    R&G Engine Case Cover for Kawasaki Ninja 650 '17 & Z650 '17 | Right Side

    The R&G engine case cover for Kawasaki Ninja 650 '17 & Z650 '17 | right side offers protection and reduces the risk of damage to the vulnerable and fragile engine case on the throttle side in the event of a tip over or slide. Robust 4mm Polypropylene construction is impact absorbing and abrasion resistant to ensure the integrity of the original equipment isn't compromised so motor oil stays where it belongs; inside the motorcycle. This defensive engine case cover also decreases the risk of getting dirt and debris into the motor which can result in catastrophic engine failure. This wise investment is highly recommended for street riders to prevent expensive repairs, replacement or even to avoid getting stranded after an incident with an inoperable motorcycle.

    100% bolt-on installation means there is no need for permanent modifications. Simply fit the R&G cover over the original clutch cover and secure with the supplied replacement hardware in the factory mounting holes without losing a drop of oil or replacing the gasket. Preserve the heart of your Kawasaki with an engine case cover from the protection professionals at R&G!

    Learn More
    $87.74

  20. NEW
    R&G Engine Case Cover for Ninja 650 '17 & Z650 '17 | Left Side

    R&G Engine Case Cover for Kawasaki Ninja 650 '17 & Z650 '17 | Left Side

    The R&G engine case cover for Kawasaki Ninja 650 '17 & Z650 '17 | left side provides protection for the vulnerable and exposed section of motor to reduce the risk of damage in the event of a tip over or slide. Strong Polypropylene construction (4mm thick) can absorb impacts and resist abrasions to preserve the integrity of the original equipment so oil stays inside the motorcycle and not in a puddle on the ground after a fall. This protective engine case cover also minimizes the risk of debris penetrating the OEM cover and contaminating the oil which can result in catastrophic engine failure. For a relatively small investment you could save yourself from a very expensive repair bill if/when your bike goes down.

    Installation does not require replacement of the gasket or even losing a drop of oil. Simply remove a few bolts (always follow the installation instructions) place the R&G case cover over original stator cover and secure with the supplied replacement hardware in the factory mounting holes. No permanent modifications necessary. Keep your Kawasaki safe with an engine case cover from the protection experts at R&G!

    Learn More
    $87.74

  21. R&G Engine Case Covers for Suzuki V-Strom DL1000 '14-'15 | Pair

    R&G Engine Case Covers for Suzuki V-Strom DL1000 '14-'15 | Pair

    Offering protection for both sides of your bike, these R&G Engine Case Covers are the ideal crash guards. Learn More
    $156.10

  22. SALE
    Givi MT501S Metro-T Multilock Saddlebag (Ea.) | 18 Liters/Bag

    Givi MT501S Metro-T Multilock Saddlebag (Ea.) | 18 Liters/Bag

    Givi MT501S Metro-T Side Saddlebag (Ea.) | 18 Liters/Bag

    This side saddlebag by Givi has a line-up of features that make it a great luggage solution for your gear. The MT501S Metro-T is a top loading, expanding, and easily transportable side bag. Using the Multilock system, detach the bag from your motorbike and take it with you using either the comfortable hand grip, or shoulder strap. The Givi Multilock system allows for rapid adding and removing of this side saddlebag. Sideracks are motorcycle specific and sold separately.

    You can stuff 18 liters of travel essentials in this handy case, taking advantage of the mesh side pockets for those extra items you just can’t live without. If you need a little extra room, the MT501S expands. To finish the case off Givi included a rain cover for those adventure or rainy days.

    The zippers are lock ready, so you don’t have to worry about your things walking away. For extra visibility Givi has added reflective inserts on the sides of the MT501S Metro-T.

    Givi manufactures this bag using a combination of materials like thermoformed EVA, Guzzy600D - PVC, and PU. These textiles make the side bag water, stress crack, and UV resistant.  The MT501S Metro-T is tuned into the needs for city commuters, and adventure riders alike.

    If you are looking for a pair of these great side saddlebags, check out a set of them here.

    Dimensions: Height 14.2” x Depth 7.9” x Width 13.4”

    Features:

    Learn More
    $260.00 $234.00

  23. Standard Motorcycle Luggage Package for Honda NC700X & NC750X

    Standard Motorcycle Luggage Package for Honda NC700X '12-'15 & NC750X '14-'15

    We have taken the legwork out of selecting a luggage set up for your Honda NC700X ’12-’15 or NC750X ’14-15 by providing the Standard Motorcycle Luggage Package. With quality aluminum 37 liter side cases, quick release side carrier mounting racks, case ready top rack, quick release luggage carrier, 60 liter dry bag and an expandable tank bag, you will be able to carry your essentials securely for your next adventure. Whether your next ride is to Pakistan or just the packy, you will be able to carry what you need with the Standard Motorcycle Luggage Package. Learn More

    From: $65.95

    To: $1,733.50

  24. R&G Stainless Steel Chain Guard For Triumph Bonneville T120 ’16 & Street Twin ‘16

    R&G Stainless Steel Chain Guard For Triumph Bonneville T120 '16-'17 & Street Twin '16-'17

    The R&G stainless steel chain guard is a direct replacement for the factory guard increasing coverage and safety. This durable and corrosion resistant unit covers the exposed upper portion of the chain and extends past the rear sprocket. More coverage means you’re protected against accidental contact avoiding injury and helps prevent chain lubricant from splattering your gear. Invest in high quality, good looking and easy to install protection by grabbing the R&G stainless steel chain guard. Learn More
    $63.18

  25. Pro Motorcycle Protection Package for BMW R1200GS '10-'12

    Pro Motorcycle Protection Package for BMW R1200GS '10-'12

    The Pro Motorcycle Protection Package, put together by the experts at Twisted Throttle, will provide your BMW R1200GS ’10-’12 with the off road and street protection it deserves. With strong yet light products such as SW-MOTECH rally style lower crash bars, upper crash bars, left and right cylinder head guards, aluminum skid plate, centerstand skid plate extension, swingarm slider kit, sidestand foot enlarger, rear brake master cylinder guard, rear brake reservoir guard, and regulator guard, as well as Barkbusters handguards, your motorcycle will be protected from everyday mishaps that could leave you with expensive repairs or stranded. Keep your motorcycle adventures rolling with the insurance provided by the Pro Motorcycle Protection Package. Learn More

    From: $37.95

    To: $1,572.35

  26. Standard Motorcycle Protection Package for Honda Africa Twin CRF1000L

    Standard Motorcycle Protection Package for Honda Africa Twin CRF1000L '16-'17

    Protect your Honda Africa Twin CRF1000L on or off the road with our Standard Motorcycle Protection Package. We have put together Barkbusters handguards as well as SW-MOTECH crash bars, rear brake reservoir guard, skid plate and sidestand foot enlarger to give you overall protection in one kit. Built for real world riding with real world riders, this kit offers protection without sacrificing nimbleness or style. Keep your adventure rolling with the Standard Motorcycle Protection Package. Learn More

    From: $44.95

    To: $786.70

  27. MRA VarioScreen Windshield for BMW R1150GS '00-'04 & R1150GS Adventure '00-'06

    MRA VarioScreen Windshield for BMW R1150GS '00-'04 & R1150GS Adventure '00-'06

    The two-piece Varioscreen can be adjusted by angle or height and features an internal wind channel to reduce turbulence. Available in clear or smoke gray only. Learn More
    $197.95

  28. R&G Stainless Steel Chain Guard For Triumph Thruxton 1200 '16 & Thruxton 1200R '16

    R&G Stainless Steel Chain Guard For Triumph Thruxton 1200 '16 & Thruxton 1200R '16

    Add the R&G stainless steel chain guard to help prevent accidental and potentially dangerous contact with the chain and keep your gear cleaner. This guard replaces the factory unit and covers the exposed upper portion of your chain while also extending past the rear sprocket, providing you with the ultimate in protection. Manufactured using brushed stainless steel this chain guard is a sturdy, durable and corrosion resistant aftermarket replacement for the flimsy original. Get the high-quality protection that you and your motorcycle deserve with R&G! Learn More
    $63.18

  29. Standard Motorcycle Protection Package for BMW R1200GS

    Standard Motorcycle Protection Package for BMW R1200GS '04-'07

    Protect your BMW R1200GS '04-'07 with our standard motorcycle protection package. With Barkbusters handguards as well as SW-MOTECH crash bars, skid plate, sidestand foot enlarger and headlight guard, many of the vital components of your motorcycle will be protected. Adventure further on your next motorcycle ride with the insurance provided by this standard protection package. Learn More

    From: $57.95

    To: $835.70

  30. R&G Rear Footrest Blanking Plate For Yamaha FZ-07 '14-'17 | With Reservoir Holder - Silver

    R&G Rear Footrest Blanking Plate For Yamaha FZ-07 '14-'17 | With Reservoir Holder - Silver

    Give your motorcycle's back end a makeover by grabbing the R&G rear footrest blanking plate. These pieces cover the otherwise exposed subframe holes after removing the passenger pegs, providing not only a cleaner look but also preventing dirt buildup. This kit includes a reservoir bracket that will safely and securely hold your rear brake fluid receptacle. Invest in high-quality protection with R&G.

    The black version of the R&G rear blanking plate with reservoir holder; RG.BLP0032.BK, is available here.

    Learn More
    $69.37

  31. SALE
    GIVI TN2128 Crash Bars Engine Guards for Yamaha XSR900 '16-'17

    GIVI TN2128 Crash Bars Engine Guards for Yamaha XSR900 '16-'17

    Provide protection to the vulnerable engine case of your motorcycle with the GIVI TN2128 crash bars for the Yamaha XRS900. Using 25mm diameter steel tube construction, these guards are frame mounted and finished in black. Mounting lower than traditional crash bars, this protection provides ample coverage of the exposed case covers. Mount a set of TN2128 crash bars by GIVI before your next road trip for great looking protection that works. Learn More
    $180.00 $162.00

  32. R&G Rear Footrest Blanking Plate for MV Agusta Brutale 1090 '14-'16 | Left Side

    R&G Rear Footrest Blanking Plate for MV Agusta Brutale 1090 '14-'16 | Left Side

    The R&G rear footrest blanking plate for MV Agusta Brutale 1090 '14-'16 | left side replaces the original passenger foot peg mount to cover up exposed bolt holes & improve aesthetics when riding solo. CNC machined aluminum plate is hard anodized black for improved durability and corrosion resistance. This sleek blanking plate bolts to the left side of the subframe and integrates perfectly with the subframe. Installation is very simple as absolutely no modifications are required for proper fitment. If you frequently ride without a passenger, easily enhance the appearance of your MV Agusta Brutale 1090 with a footrest blanking plate from R&G! Learn More
    $29.10

  33. NEW
    R&G Carbon Kevlar Tail Sliders for Kawasaki ZX10R Ninja '16-’17

    R&G Carbon Kevlar Tail Sliders for Kawasaki ZX10R Ninja '16-’17

    Protect the exposed tail section of your motorcycle with R&G Carbon Kevlar Tail Sliders for the Kawasaki ZX10R Ninja. An unexpected drop or slide can easily destroy the rear bodywork on your machine. These guards are constructed of carbon fiber reinforced with Dupont Kevlar and designed to cover the pronounce angles of your tail section for incredible insurance against impact and abrasion damage. Keep riding with Carbon Kevlar Tail Sliders from R&G Learn More
    $95.39

  34. Barkbusters Storm Lever & Weather Protection Handguards for Select Triumph Tiger 800 & Explorer Models | BHG-059 Storm

    Barkbusters Storm Lever & Weather Protection Handguards for Select Triumph Tiger 800 & Explorer Models | BHG-059 Storm

    Barkbusters Storm Lever & Weather Protection Handguards for Triumph Tiger 800 '10-'14, Tiger 800 XC '10-'16, Tiger 800 XCx '15-'16, 800 XR '15-'16, 800 XRx '15-'16, Explorer 1200 '12-'15, Explorer 1200 XC '12-'15, Tiger Explorer XCx '16-'17, Tiger Explorer XCa '16-'17, Tiger Explorer XR '16-'17, Tiger Explorer XRx '16-'17 & Tiger Explorer XRt '16-'17 | BHG-059 Storm

    The Barkbusters Storm Handguards are designed to protect your hands with a hardened aluminum backbone topped off with replaceable plastics that offer maximum coverage. Wind, weather, stones and other road projectiles are deflected to safeguard your hands while riding. The storm handguards also cover the brake and clutch levers to prevent accidental activation when riding in groups or through narrow trails. In the event of a fall, the aluminum backbone will protect your levers from damage allowing you to pick your bike back up and ride home.

    Learn More
    $149.90

  35. R&G Footrest Blanking Plate For Kawasaki Vulcan 900 Custom '12-'17

    R&G Footrest Blanking Plate For Kawasaki Vulcan 900 Custom '12-'17

    Discover how easy it is to clean up the leftover spaces after removing your passenger foot pegs with the R&G footrest blanking plates. Without the addition of these handy little plates, all those exposed holes are open to being invaded by dirt and muck. The plates are finished in black with a white painted R&G logo. You will be provided with plates to cover both the left and right-hand side of your motorcycle. If you won't be riding with a passenger and decide to remove the pillion pegs the R&G footrest blanking plates are a must have for a clean look and the protection of exposed parts. Learn More
    $66.30

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 164 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5