x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Search results for '300'

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 167 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Dunlop D606, Dual Sport, Rear 18 Inch, Size 120/90-18, 90% Dirt / 10% Street, 65R, Tubed Bias Ply Tire

    Dunlop D606, Dual Sport, Rear 18 Inch, Size 120/90-18, 90% Dirt / 10% Street, 65R, Tubed Bias Ply Tire

    If you're looking for a tire that emphasizes in off road riding, but is still street legal, then the Dunlop D606 Dual Sport tire is for you. Learn More
    $151.95 $107.95

  2. Dunlop D606, Dual Sport, Rear 18 Inch, Size 130/90-18, 90% Dirt / 10% Street, 69R, Tubed Bias Ply Tire
    $159.95 $111.95

  3. HEX Code EU4 Adapter Cable for GS-911wifi to fit EU4 Compliant J1962 (OBD-11) Diagnostic Connectors

    HEX Code EU4 Adapter Cable for GS-911wifi to fit EU4 Compliant OBD Diagnostic Connectors

    Allow your 10 pin diagnostic connector outfitted GS-911wifi to connect to the new generation of EU4 compliant J1962 (OBD II) diagnostic connection equipped motorcycles with the HEX Code EU4 Adapter Cable. Beginning in 2017, all motorcycles will be required to meet EU4 standards which includes the use of OBD II diagnostic connectors. Perfect for enthusiasts who plan to own or service motorcycles spanning these years, this handy plug will allow your HEX Code diagnostic tool with 10 pin connectors to be compatible with the newer models as well. Diagnose pre and post 2017 motorcycles easily with the EU4 adapter cable for the GS-911wifi by HEX Code. Learn More
    $30.00

  4. R&G Front Axle Sliders Fork Protectors for Kawasaki Ninja 300 '13-'16

    R&G Front Axle Sliders Fork Protectors for Kawasaki Ninja 300 '13-'17

    The R&G front axle sliders fork protectors for Kawasaki Ninja 300 protect critical front end components from damage in the event of a tip over, slide or crash. The impact absorbing and abrasion resistant high density polyethylene bobbins act as armor to prevent vulnerable parts from getting ground down into the pavement. These essential front axle sliders bolt through the front wheel for even greater support. Installation is simple and requires no modifications to the motorcycle. Safeguard your Ninja properly with these Fork protectors from the protection experts at R&G!

    Learn More
    $44.82

  5. SW-MOTECH EVO Adjustable Foot Peg Kit for Select BMW F650 CS Scarver, Honda CB500F, CB500X, XL1000V Varadero, CB1300 & Triumph Speed Triple 1050 Models

    SW-MOTECH EVO Adjustable Foot Peg Kit for Select BMW F650 CS Scarver, Honda CB500F, CB500X, XL1000V Varadero, CB1300 & Triumph Speed Triple 1050 Models

    Enhance your on and off road riding with the SW-MOTECH EVO Foot Peg Kit designed specifically for the BMW F650 CS Scarver, Honda CB500F, CB500X, XL1000V Varadero, CB1300 and Triumph Speed Triple 1050. These foot pegs have a unique design with an offset cam located by a sturdy splined shaft that allows selection of 12 positions. At the highest position, the EVO Foot Peg Kit is level with the stock location. At the lowest, the pegs drop the foot position by 0.6in (15mm). The cam design also allows the pegs to be positioned slightly down and slightly forward, about 0.3in (8mm) in each direction, as well as slightly down and back. The EVO Foot Peg Kit also permits changing the face angle of the peg plus or minus 18 degrees for maximum comfort. Meshing teeth on the adjustment pivots provide solid positioning to ensure your pegs remain in the position you select. With a larger surface area than stock foot pads, removable aggressive rubber tread pads and traction lugs with rounded edges for longer boot life, you will enjoy solid foot position no matter how sloppy conditions get. Complete with model specific hinged mounts and easy to install, this kit features marked increments to simplify and ensure symmetrical adjustments for both pegs. Ride your next motorcycle adventure to your potential with EVO Adjustable Foot Pegs by SW-MOTECH. Learn More
    $169.95

  6. R&G Headlight Shields for Kawasaki Ninja 300 & Versys 650 (Image shown does not represent actual product)

    R&G Headlight Shields for Kawasaki Ninja 300 '13-'17 & Versys 650 '15-'17

    Preserve your vulnerable headlight lenses with the R&G headlight shields for Kawasaki Ninja 300 & Versys 650.

    Tough 2.5mm thick acrylic construction deflects bugs, stones and other debris that can cause reduced light output from scratches scrapes, and pitting. These low profile headlight shields don't require bulky mounting brackets to keep your lenses safe as they are secured with transparent Dual Lock™ 3M™ "reclosable fasteners". Each guard is UV-stabilized to prevent yellowing over time while offering superior optical clarity and maximum possible light output. Each acrylic piece is precision formed and CNC cut for a perfect fit that contours with the original shape of the factory equipment.

    Headlight protection is a highly recommended investment that can save you from expensive repairs or replacement. Don't leave your headlights defenseless, safeguard them with a set of headlight shields from R&G!

    Learn More
    $42.95

  7. Kaoko Throttle Lock Cruise Control for Select BMW Motorcycles

    Kaoko Throttle Lock Cruise Control for Select BMW Motorcycles

    Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Does not fit K1200RS. Learn More
    $136.95

  8. MFW Replacement Rider Foot Peg Mount for Select BMW Motorcycles

    MFW Replacement Rider Foot Peg Mount for Select BMW Motorcycles

    The MFW replacement rider foot peg mounts for select BMW motorcycles fits in the stock location without modifications and allows the use of upgraded MFW foot pegs. CNC machined aluminum provides a precise fit without the need for drilling, cutting, welding or concrete mixing for proper fitment. These high quality mounts allow fitment of MFW foot pegs to improve grip, comfort, and style over the slippery factory equipment. Please note that a set of foot pegs must be used with this to complete installation. Get a grip and upgrade the pegs on your BMW with the addition of the MFW foot peg mounts!

    Learn More
    $37.95

  9. NEW
    SW-MOTECH ION Adjustable Foot Peg Kit for Kawasaki Versys-X 300 '17, Versys 650/LT '15-'17, Versys 1000LT '15-'17

    SW-MOTECH ION Adjustable Foot Peg Kit for Kawasaki Versys-X 300 '17, Versys 650/LT '15-'17, Versys 1000LT '15-'17

    The convertible footpeg system from SW-MOTECH allows you to replace your stock pegs with wider pegs at one of two heights, complete with a removable rubber pad for quick conversion from on to off-road applications! Bike-specific mount and set of footpegs with removable textured rubber foot pads included. Learn More
    $130.83

  10. NEW
    SW-MOTECH Centerstand For Kawasaki Versys-X 300

    SW-MOTECH Centerstand For Kawasaki Versys-X 300 '17

    The SW-MOTECH centerstand for your Kawasaki Versys-X 300 increases the versatility of your machine for more secure parking on various terrain while enhancing ease of maintenance without the need for a paddock stand. Robust steel construction provides sturdy support for the motorcycle and is powder coated black for enhanced durability and corrosion resistance. This high-quality centerstand is designed and engineered in Germany for seamless integration with the factory original components and easy operation utilizing a built-in foot lever which increases leverage and decreases lifting effort.

    On the road maintenance and repairs are easier to perform as the rear wheel can be quickly lifted off the ground at any time. Parking stability on soft dirt, grass or any other surface is significantly improved over the factory sidestand which can easily sink and cause the motorcycle to tip over. Installation is straightforward without the need for any drilling, cutting or other permanent modifications. Add an SW-MOTECH centerstand on your Versys-X and be prepared for every adventure!

    Learn More
    $192.60

  11. NEW
    SW-MOTECH Crash Bars Engine Guards for Kawasaki Versys-X 300

    SW-MOTECH Crash Bars Engine Guards for Kawasaki Versys-X 300 '17

    Protect your bike's bodywork and fuel tank in the event of a crash or slide with these SW-MOTECH Crash Bars Engine Guards! The protective frame is designed to integrate seamlessly with the unique flexure of your bike, resulting in a very cool, very functional product. A sweet black powder coat ensures the engine guards remain durable and sleek even after years of exposure to the elements. Each system provides effective protection for some of the most exposed components on your bike and installs easily using existing anchor points on your bike's frame. Learn More
    $192.60

  12. NEW
    SW-MOTECH Auxiliary Lighting Mount for Kawasaki Versys-X 300 (lights not included)

    SW-MOTECH Auxiliary Lighting Mount for Kawasaki Versys-X 300 '17

    The SW-MOTECH auxuliary light mounting bracket bolts to your Versys-X 300 easily and provides a sturdy perch for your choice of lighting products, including large-body light sets such as the Denali 2.0 D4 and the Denali 2.0 DR1, as well as smaller lights like the Denali 2.0 DM and Denali 2.0 D2

    Note: Lights shown are not included.

    Learn More
    $64.17

  13. NEW
    R&G "Tail Tidy" Fender Eliminator for Kawasaki Versys-X 300 '17

    R&G "Tail Tidy" Fender Eliminator for Kawasaki Versys-X 300 '17

    The R&G "Tail Tidy" fender eliminator for Versys-X 300 replaces the bulky factory tag holder with a much sleeker unit that significantly improves the motorcycles appearance. Sturdy powder coated stainless steel also provides a more secure foundation compared to the floppy factory plastic hardware. This slick fender eliminator is compatible with the original turn signals or upgrade to the R&G Micro LED indicators for an even lower profile. An LED plate light is integrated into the design for a clean modern look. Sharpen the rear end of your Versys with this "Tail Tidy" from R&G!

    Learn More
    $102.95

  14. NEW
    Kappa TE4108K Soft Saddlebag Supports for RA314 Easylock Side Bags on Kawasaki Ninja 300 (shown with luggage mounted - sold separately)

    Kappa TE4108K Soft Saddlebag Supports for RA314 Easylock Side Bags on Kawasaki Ninja 300 '13-'17

    The Kappa TE4108K soft saddlebag supports for RA314 Easylock side bags on Kawasaki Ninja 300 are the perfect foundation for holding your soft luggage. The racks feature sturdy steel construction powder coated in black for a sleek appearance with improved corrosion resistance. Kappa's carefully chosen mounting points ensure a secure foundation for your luggage while integrating with your motorcycle, so even when your bags are removed a clean appearance is still maintained. These side racks are compatible with Kappa's semi-rigid Easylock bags or other soft sided luggage. Installation is super easy with a few simple hand tools and the included mounting instructions. Increase the versatility and luggage carrying capabilities of your motorcycle with the Kappa TE soft saddlebag holders. Learn More
    $133.00

  15. NEW
    Kappa KZ4108 Top Rack to fit Monokey or Monolock Top Cases for Kawasaki Ninja 300 (Shown with top plate and hard luggage mounted - Sold separately)

    Kappa KZ4108 Top Rack to fit Monokey or Monolock Top Cases for Kawasaki Ninja 300 '13-'17

    The Kappa KZ4108 top rack to fit Monokey or Monolock top casees for Kawasaki Ninja 300 creates a stable platform to accommodate hard luggage. Kappa uses sturdy steel to construct the supports and black powder coats them for a durable and great looking finish. This rear luggage mounting solution uses tubular style arms that securely attach to structurally sound points on your motorbike. Once the rack is installed, attach the corresponding Monokey or Monolock adapter plate and add your Kappa top case. Grab the KZ top rack to increase the versatility of your motorcycle from the luggage experts at Kappa! Learn More
    $110.70

  16. NEW
    Kappa 4108KIT Fitment Kit to Mount TE Series Side Racks on Kawasaki Ninja 300 '13-'17

    Kappa 4108KIT Fitment Kit to Mount TE Series Side Racks on Kawasaki Ninja 300 '13-'17

    The Kappa 4108KIT fitment kit to mount TE series side racks on Kawasaki Ninja 300 makes it possible to complete installation without the use of a top rack. Designed and engineered in Italy for perfect integration with OEM components. Mount your TE4108K soft saddlebag supports with ease using the 4108KIT from Kappa! Learn More
    $59.00

  17. Kaoko Throttle Lock Cruise Control for Honda NC700X '12-'17, NC700 Integra, NC750 '14-'15, CB500X '13-'16,  CB500F '13-'17, CBR500R '13-'17, CBR300R '14-'17 & CB300F '15-'17

    Kaoko Throttle Lock Cruise Control for Honda NC700X '12-'17, NC700 Integra, NC750 '14-'15, CB500X '13-'16, CB500F '13-'17, CBR500R '13-'17, CBR300R '14-'17 & CB300F '15-'17

    Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Learn More
    $136.95

  18. NEW
    Kappa BF14K Tanklock Tank Ring for Kawasaki Ninja 300 '13-'17

    Kappa BF14K Tanklock Tank Ring for Kawasaki Ninja 300 '13-'17

    Kappa's Tanklock series of tank bags requires a bike-specific tank ring for installation. These rings are built to sandwich between your bike's fuel-filler lid and the Kappa Tanklock tank bag. Designed for straightforward installation, the Kappa Tanklock bike-specific rings supplement the flanges that come with each Tanklock tank bag. A clever design allows all Tanklock tank bags to "hover" over your fuel tank in a secure fashion without the need for straps or magnets. A single locking lever releases the tank bag when it's time to refuel or you've reached your destination. 

    Mounting instructions and all necessary hardware is included in the kit. 

    Features:

    • Bike-specific fit
    • Works with the mounting flange supplied with every Tanklock tank bag

    Learn More
    $15.50

  19. R&G Bar End Sliders For Kawasaki Ninja 650, Versys-X 300 & Z650

    R&G Bar End Sliders For Kawasaki Ninja 650 '17, Versys-X 300 '17 & Z650 '17

    The R&G bar end sliders for your Kawasaki Ninja 650, Versys-X 300 or Z650 protect the original factory handlebar and levers in the event of a fall or slide. High-Density Polyethylene (HDPE) safeguards against impacts and abrasion while helping the motorcycle slide to a smooth controlled stop. These protective bar end sliders provide enough room to keep the clutch and brake levers safely off the ground so you can ride home after an incident. Installation is very easy as no drilling, cutting, welding or concrete mixing is necessary. Invest in proper protection for your motorcycle and install a set of bar end sliders from R&G!

    Learn More
    $42.11

  20. R&G Front Indicator Adapter kit for R&G Micro Indicators on the Kawasaki Z900 & Versys-X 300

    R&G Front Indicator Adapter kit for R&G Micro Indicators on the Kawasaki Z900 '17 & Versys-X 300 '17

    Add the R&G front indicator adapter kit for R&G Micro Indicators on the Kawasaki Z900 '17 & Versys-X 300 '17 for a seamless low profile appearance. Durable plastic construction is lightweight and precision cut to fit the fairing perfectly. These handy adapters allow you to lose the bulky factory equipment and upgrade to the sleek R&G Micro LED indicators. Mounting to the bodywork is simple and does not require any modifications. When upgrading the turn signals on your Kawasaki, make sure you order a set of R&G indicator adapters for the cleanest possible look!

    Learn More
    $19.20

  21. TechSpec Gripster Side Case Lid Covers for BMW R1200RT, K1200GT & K1300GT

    TechSpec Gripster Side Case Lid Covers for BMW R1200RT, K1200GT & K1300GT | Pair

    Tired of your passenger scuffing up your side cases? Install the TechSpec Gripster Side Case Lid Covers on your BMW R1200RT, K1200GT & K1300G pannier lids and keep them scratch free!

    Learn More
    $79.95 $71.95

  22. SW-MOTECH Quick-Lock EVO Sidecarriers to fit Many Side Case Types for Honda CB1300/S

    SW-MOTECH Quick-Lock EVO Sidecarriers to fit Many Side Case Types for Honda CB1300/S '10-'15

    SW-MOTECH Quick-Lock EVO for Honda CB1300/S '10-'15 Style for Micatech, Givi, TraX ALU-BOX, & Krauser sidecases. Learn More
    $300.95

  23. R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Black

    R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Black

    The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. Learn More
    $58.91

  24. R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Black

    R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Silver

    The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures, plus it makes your bike look like a space man. Learn More
    $58.95

  25. R&G Tank Traction Grips for Kawasaki Versys-X 300 | 2 Piece Kit (Black)

    R&G Tank Traction Grips for Kawasaki Versys-X 300 '17 | 2 Piece Kit

    The R&G tank traction grips for Kawasaki Versys-X 300 2 piece kit enhances control and comfort by eliminating sliding on the fuel tank. Synthetic rubber pads add minimal thickness (less than 1mm) and are precision cut for a perfect fit that integrates with the original design of the motorcycle. These valuable grips act as an anchor point during hard braking, acceleration and cornering that allows you to focus on the road without re-adjusting into position. Comfort is improved as proper posture is promoted and pressure on hands, wrists and arms is reduced. One of the most impressive benefits is that handlebar inputs become more precise so overall riding confidence is elevated. Installation is very simple with the self-adhesive backing that stays put without harming the finish. Maximize the riding experience on your Versys-X with a set of tank traction grips from R&G!

    Learn More
    $34.95

  26. R&G Fender Extender for Kawasaki Versys-X 300 '17

    R&G Fender Extender for Kawasaki Versys-X 300 '17

    The R&G fender extender for Kawasaki Versys-X 300 increases the coverage of the OEM front fender to reduce damage from kicked up debris while improving overall cleanliness. Tough ABS plastic construction is lightweight yet strong to deflect water, mud, dirt, stones and other road rubbish. This protective fender extender maintains the profile and design of the factory fender while lengthening it enough to properly defend the vulnerable radiator and exhaust header. The result is a cleaner motorcycle with a reduced chance of paint chips/stuck on debris and cleaner riding gear. Installation of the fender extender does require some drilling but is very straightforward with pre-mounted adhesive tape and included pop rivets. Available in matte black or "Carbon Look". Keep your Versys-X looking its best with a fender extender from R&G! Learn More
    $35.95

  27. R&G Radiator Guard For Kawasaki Versys-X 300 '17 | Black, Green or Titanium

    R&G Radiator Guard For Kawasaki Versys-X 300 '17 | Black, Green or Titanium

    The R&G radiator guard for your Kawasaki Versys-X provides exceptional protection for diminutive Kawi's pint-sized radiator. Lightweight yet strong aluminum construction deflects bugs, stones and other debris that can damage fragile cooling fins and even cause a puncture. This essential radiator guard is an excellent investment on any motorcycle with sticky tires. Each unit is powder coated for an enhanced appearance that also improves durability and corrosion resistance. Installation is straightforward using the factory mounting locations without modifications.

    Learn More
    $76.95

  28. NEW
    R&G Stainless Steel Radiator Guard For Kawasaki Versys X 300

    R&G Stainless Steel Radiator Guard For Kawasaki Versys X 300 '17

    The R&G Stainless Steel Radiator Guard For Kawasaki Versys-X 300 is a more robust radiator guard designed to handle some serious riding. Constructed from 1mm stainless steel, the radiator guards are incredibly strong and impervious to rust. The laser-cut grill is designed for maximum airflow to the radiator, and perfectly compliments the look of your bike! The guard attaches to your bike easily, by utilizing existing mounting points. Give your Versys-X 300 that extra bit of protection that could mean the difference between riding home or finding a ride home! Learn More
    $89.95

  29. R&G Tank Traction Grips For Honda CBR300R | 4 Piece Kit

    R&G Tank Traction Grips For Honda CBR300R '14-'17 | 4 Piece Kit

    Gain better control and increase your confidence when braking and cornering by adding the R&G tank traction grips to your CRB300R. The low profile synthetic rubber pads feature a textured surface on one side and a super sticky self-adhesive coating on the other. The grain helps you hold your seating position without tearing up your gear and the adhesive won’t damage your paint. By increasing your ability to maintain your seat alleviates pain and reduces fatigue. This four piece precision cut kit is just what you need to enhance your ride. Installing the R&G tank traction pads are easy and they come in your choice of black or clear.

    Learn More
    $38.40

  30. SW-MOTECH Left & Right Side Frame Cap Set for BMW R1200R '15 & R1200RS '15-'16

    SW-MOTECH Left & Right Side Frame Cap Set for BMW R1200R '15-'17 & R1200RS '15-'17

    This SW-MOTECH Left & Right Side Frame Cap Set is designed to cover the original screws on the swingarm to prevent clogging from dirt and debris. Keep your bike clean and functioning properly with this pair of inserts. Oh, and they look really smart. And who doesn't want to look smart? Learn More
    $58.95

  31. DENALI M7 Heaedlight Module Adapter Kit for Suzuki DR-Z '03-'16 Models

    DENALI M7 Headlight Module Adapter Kit for Suzuki DR-Z400 '03-'18 & DR650S '02-18

    This DENALI M7 Headlight Module Adapter Kit for Suzuki DR-Z400 and DR650 bolts in place to allow mounting of the DENALI M7 headlight module for dramatically improved visibility. The robust steel bracket is laser cut for a precise fit and finished in a durable powder coated black to resist corrosion while looking factory original. Enhance the light output of your DR-Z with a little help from the lighting experts at DENALI!

    Learn More
    $30.00

  32. DENALI M7 DOT LED Headlight & Adapter Bracket Kit for Suzuki DR-Z400 & DR650

    DENALI M7 DOT LED Headlight & Adapter Bracket Kit for Suzuki DR-Z400 '03-'18, DR-Z400E '03-'16, DR-Z400S '03-'18, DR-Z400SM '03-'18 & DR650S '03-'18

    Brighten the road or trail with the DENALI M7 DOT LED Headlight and adapter bracket kit. Designed specifically for the Suzuki Dr-Z400, DR-Z400E, DR-Z400S, DR-Z400SM & DR650S, this replacement headlight assembly is simple to install and looks great. Featuring a super wide low beam, piercing high beam and halo daytime running lights, this LED setup will throw light twice as far as a stock LED headlight and three times further down the road than a stock halogen headlight. With a unique design and black chrome finish the DENALI M7 DOT LED headlight and adapter bracket kit will increase your visibility and give your motorcycle a modern custom look. Learn More

    From: $30.00

    To: $459.00

  33. SW-MOTECH QUICK-LOCK EVO Side Carriers to fit Many Side Case Types for KTM 1290 Super Duke GT '17

    SW-MOTECH QUICK-LOCK EVO Side Carriers to fit Many Side Case Types for KTM 1290 Super Duke GT '17

    The SW-MOTECH QUICK-LOCK EVO side carriers provide a secure foundation for mounting hard saddlebags on the KTM 1290 Super Duke GT '17 with superior quality German craftsmanship and design. High strength tubular steel construction efficiently maximizes available mounting space to maintain a slim width of 18.5" without luggage. This versatile side carrier bolts directly to existing mounting points on the subframe without drilling, cutting or other permanent modifications. Once the small fixing lugs have been installed, the rest of the framework is secured with quarter turn fasteners that allow swift removal using only a coin. The simplicity of this QUICK-LOCK system allows you to remove the rack for maintenance or local cruising when bags are not necessary. Optional Keyed Quick-Locking fasteners are available to protect your investment by adding theft protection. A hard bolt kit is also available separately for those who don't plan to remove the side carrier frequently. Model specific hardware or adapters are available for mounting most popular brands of hard luggage (select from the drop down menu above). Combine your favorite hard luggage with this QUICK-LOCK side carrier and enjoy enhanced capacity, luxury and convenience on every adventure!

    Learn More
    $300.95

  34. Kaoko Throttle Lock Cruise Control for Yamaha FZS1000 Fazer '01-'05, FZ1 Fazer '06-'15, FZ6, TDM850, TDM900, XJR1200, XJR1300, MT01 & XJ900 Diversion, XJ6 '14-'15 & FZ6R '15-'16 | Black or Silver

    Kaoko Throttle Lock Cruise Control for Yamaha FZS1000 Fazer '01-'05, FZ1 Fazer '06-'15, FZ6, TDM850, TDM900, XJR1200, XJR1300, MT01 & XJ900 Diversion, XJ6 '14-'15 & FZ6R '15-'16 | Black or Silver

    Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Available in black (YAM300) and silver (YAM300S). Black matches original bar ends on most models; silver matches original bar ends on MT01. Learn More
    $141.95

  35. SALE
    GIVI 541FZ Top Rack For GIVI Monokey Or Monolock Top Case For Suzuki Hayabusa GSX1300R

    GIVI 541FZ Top Rack For GIVI Monokey Or Monolock Top Cases For Suzuki Hayabusa GSX1300R '08-'17

    The GIVI 541FZ top rack is a simple mounting solution for a GIVI Monokey or Monolock top case. This rear rack includes a set of monorack style arms that support a Monokey or Monolock specific adapter plate that allows the attachment of your case. To install, simply remove your factory grab rail, bolt on the support arms and replacement rails and you're ready to ride with your rear luggage box securely mounted. GIVI offers a wide variety of top cases to suit your personal style and carrying needs.

    The arms are fabricated out of black powder coated sturdy steel for a durable and long lasting finish. Add the GIVI 541FZ top rack to increase the versatility and luggage carrying capacity on this awesome sports motorcycle.

    A larger grab rail is included with the GIVI 541FZ as the original rails must be removed for proper installation of this rack.

    Learn More
    $120.00 $108.00

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 167 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5