x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Search results for 'covers'

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 352 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. R&G Engine Case Cover Kit for Ninja 650 & Z650 | 2 Piece

    R&G Engine Case Cover Kit for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | 2 Piece

    The R&G engine case cover kit for Kawasaki Ninja 650 & Z650 | 2 piece provides essential protection for the expensive and exposed sections of the motor in the event of a low side spill or tip over. Hearty 4mm Polypropylene construction absorbs impacts while also defending against abrasions that could easily compromise the integrity of the original equipment. These protective covers reduce the risk of wear through that can cause dirt and debris from getting into your motor and a loss of oil that ultimately result in engine failure. This small investment is highly recommended for street riders to prevent expensive in repairs, replacement or even getting stranded after an incident and waiting for a tow truck.

    Fitment is easy without the need for any permanent modifications. Simply mount the covers over the original cases using existing mounting holes without the need to replace gaskets or lose a drop of oil. Coverage of the entire clutch, timing and stator on the left and right side of the motor are protected from top to bottom. Keep your Kawasaki safe with the engine case cover kit from the protection experts at R&G!

    Learn More
    $163.95

  2. R&G Race Series Engine Case Cover Kit for Ninja 650 & Z650 | 2 Piece

    R&G Race Series Engine Case Cover Kit for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | 2 Piece

    The R&G race series engine case cover kit for Kawasaki Ninja 650 & Z650 provides critical protection for the vulnerable engine cases in the event of a low side spill or tip over. Robust 4mm Polypropylene is naturally impact absorbing and abrasion resistant to defend against cracking and wear through of fragile metals when your motorcycle goes down. The beefed-up race series covers enhance protection a step further than the standard covers using replaceable slider pucks at the impact face for even greater wear resistance. After a small slide, just the slider puck itself can be replaced so you can head back out on the track without missing a session. These essential case covers are highly recommended for track day enthusiasts but street riders can also benefit from the added protection.

    Installation is simple without the need for modifications, simply bolt on using existing mounting holes and there is no chance of spilling oil or need to replace any gaskets. This essential kit safeguards the entire clutch cover, timing case and stator case from top to bottom. Relied on by British Super Bike race teams and approved by the AMA as proper safety equipment that reduces the risk of damage to your motorcycle while also reducing the risk spilling oil on the track. Invest in serious protection for the heart of your Kawasaki with the race series engine case cover kit from the protection experts at R&G!

    Learn More
    $179.95

  3. R&G Engine Case Cover Kit for Suzuki GSX-S750 '18 | 3 Piece

    R&G Engine Case Cover Kit for Suzuki GSX-S750 '18 | 3 Piece

    The R&G engine case cover kit for Suzuki GSX-S750 '18 | 3 piece provides impact and abrasion protection for the original clutch cover, stator cover and idle gear cover in the event of a fall or slide. Sturdy polypropylene construction is 4mm thick to significantly reduce the risk of damage in an impact and prevent wear through in a low side. These protective case covers mount directly over the factory Suzuki engine covers without the need to lose a drop of oil or replace gaskets. Permanent modifications are not necessary as original mounting holes are utilized with included extended hardware.

    This 3 piece kit is one of the smartest investments for any track or street going motorcycle especially when you consider the relatively small cost vs. repair or replacement of OEM engine covers. Without this set a small slide could easily compromise the integrity of the motor causing oil loss and even worse; a complete rebuild. Make sure your GSX-S750 is well protected with the 3 piece engine case cover kit from R&G!

    Learn More
    $219.95

  4. R&G Race Series Engine Case Cover for Yamaha YZF R6 | Left Side Crankcase

    R&G Race Series Engine Case Cover for Yamaha YZF R6 '06-'17 | Left Side Crankcase

    Keep a drop from crippling your motorcycle by protecting the left side crankcase of your Yamaha YZF R6 with an R&G Race Series Engine Case Cover. With a 4mm molded polypropylene casing and a replaceable High Density Polypropylene slider puck located at the predominant contact point, this cover will offer superb protection on the street or track. Keep on riding with a race series engine case cover by R&G. Learn More
    $92.95

  5. R&G Race Series Engine Case Cover for Yamaha YZF R6 | Right Side Crankcase

    R&G Race Series Engine Case Cover for Yamaha YZF-R6 ‘08-’17 | Right Side Crankcase

    Protect the vulnerable crankcase on your motorcycle with the R&G Race Series Engine Case Cover for your Yamaha YZF-R6. Featuring a replaceable High Density Polypropylene slider puck that is designed to take the brunt of the contact, the protector is constructed of 4mm thick polypropylene. Keep your motorcycle rolling and prevent expensive repairs with a Race Series Engine Case Cover by R&G. Learn More
    $98.95

  6. SALE
    Givi MT501 Metro-T Side Saddlebags (Pair) | 18 Liters/Bag

    Givi MT501 Metro-T Multilock Saddlebags (Pair) | 18 Liters/Bag

    Givi MT501S Metro-T Side Saddlebag (Ea.) | 18 Liters/Bag

    This pair of side saddlebags attach to your motorcycle using Givi’s Multilock system. The system allows for quick and easy adding/removal of the bags from the sideracks. The side bag holders are motorbike specific, and sold separately. The set of saddlebags are top loading, so you can get to your stuff quickly and not have to worry about it spilling out.

    The Givi MT501’s are made by thermoforming EVA, and then covering it with Guzy600D - PVC and PU. So if your looking for a durable side bag that resist stress cracking, water, and won’t fade rapidly, this ones for you.

    When you are out and about you want a luggage solution that will hold riding/trip essentials, keep them secure, and give protection from the elements. The MT501 has lock ready zippers, two options for carrying when off your motorcycle, included rain covers and side mesh pockets for extra storage. Additionally these side bags are expandable, and have reflective inserts on the sides for more visibility. Whether you are commuting to work, or heading out on a weekend adventure the Givi MT501 Metro-T’s have you covered.

    Dimensions: Height 14.2” x Depth 7.9” x Width 13.4”

    Learn More
    $535.00 $481.50

  7. R&G Engine Case Cover For Ducati XDiavel - left side
    $65.95

  8. SW-MOTECH Frame Covers For Suzuki SV650 | 2 Piece Kit

    SW-MOTECH Frame Covers For Suzuki SV650 '17 | 2 Piece Kit

    Discover how easy it is to add a little customization and protection to your Suzuki SV650 is with the SW-MOTECH frame cover kit. Sporting a classic look this aftermarket accessory suits the styling of your V-twin Sportbike. SW-MOTECH fabricates the covers using black powder coated aluminum. Simply bolt the SW-MOTECH left and right covers using the existing mounting points on your motorcycle. Ride away in style with SW-MOTECH! Learn More
    $47.95

  9. R&G Frame Plug For Ducati Monster 1200R '16 | Front - LHS & RHS & Rear - RHS

    R&G Frame Plug For Ducati Monster 1200 '14-'16, Monster 1200S '14-'16 & Monster 1200R '16-'17 | For Front or Rear

    Exposed bolt holes in your frame can get clogged with gunk and that ends up corroding your bolt; prevent this from happening by covering those voids with the R&G frame plug. R&G crafts the plugs out of high density Polyethylene so the exposed hardware is not only covered, it’s protected. Installation is easy, with a couple of simple hand tools and a few minutes of your time you’re riding away with a cleaned up frame.

    Learn More
    $24.95

  10. SW-MOTECH Frame Covers For Suzuki SV650 | 3 Piece Kit

    SW-MOTECH Frame Covers For Suzuki SV650 '17 | 3 Piece Kit

    Discover how easy it is to add a little customization and protection to your Suzuki SV650 is with the SW-MOTECH frame cover kit. Sporting a classic look this aftermarket accessory suits the styling of your V-twin Sportbike. SW-MOTECH fabricates the covers using black powder coated aluminum. Simply bolt the SW-MOTECH left and right covers using the existing mounting points on your motorcycle. Ride away in style with SW-MOTECH! Learn More
    $143.95

  11. R&G Race Series Engine Case Cover for Ninja 650 & Z650 | Right Side

    R&G Race Series Engine Case Cover for Ninja 650 '17-'18 & Z650 '17-'18 | Right Side

    The R&G race series engine case cover for Kawasaki Ninja 650 & Z650 | right side provides essential protection for the engine case reducing the risk of damage in the event of a tip over or low side slide. Hearty 4mm Polypropylene construction naturally absorbs impacts and is abrasion resistant to prevent breakage and wear through. The upgraded race series engine case cover enhances protection over the standard covers by adding replaceable slider pucks at the impact face. In the event of a small slide, just the slider puck itself can be replaced so you can head back out on the track without missing a session. This case cover is strongly recommended for track day enthusiasts needing an extra level of safety although street riders will benefit as well.

    Modifications are not required for installation, simply bolt on using factory mounting holes without the need to replace gaskets or lose a drop of oil. This right-side engine cover preserves the clutch cover from top to bottom on the throttle side of the motorcycle. Entrusted by British Super Bike race teams and approved by the AMA for reducing the risk of spilled oil on the track and minimizing possible of damage during an incident. Bolt-on the race series engine case cover from R&G and ride in confidence knowing your Kawasaki is protected!

    Learn More
    $99.95

  12. Plus Protection Package for BMW F700GS

    Plus Motorcycle Protection Package for BMW F700GS '13-'16

    The Plus Motorcycle Protection Package for the BMW F700GS '13-'16, with components picked out by our experts here at Twisted Throttle, will provide a higher level of protection than our standard protection package. With Barkbusters handguards; SW-Motech crash bars, skid plate, rear master cylinder guard, rear axle swingarm slider kit, headlight guard and sidestand foot enlarger; as well as R&G left and right side engine case cover kit, your motorcycle will be protected from headlight to sidestand. Whether you are commuting to work or exploring the backwoods, this package will provide protection for your bike from everyday mishaps that could leave you with costly repairs or stranded. Ride your ride to your potential with the insurance provided by our Plus Motorcycle Protection Package. Learn More

    From: $36.99

    To: $1,191.59

  13. R&G Engine Case Cover For Triumph Speed Triple R '16-'17 & Speed Triple S '16-'17

    R&G Engine Case Cover For Triumph Speed Triple R '16-'18 & Speed Triple S '16-'18 | LHS Alternator

    AMA Approved Product

    Discover the R&G engine case cover for your Triumph Speed Triple. Manufactured using 4mm polypropylene this guard will protect your vulnerable and expensive to repair engine casing during a tip-over, crash or slide. R&G uses 3D scanning technologies to ensure this cover slides perfectly over your factory engine case. Just secure it to your motorcycle with the included replacement hardware and you’re ready to ride. Are you heading into a bend and need to do some serious leaning? Don’t worry, the engine case cover leaves plenty of clearance. Invest in high-quality protection with R&G.

    If you are looking for complete engine case protection for your Triumph Speed Triple R or S, you can grab the RHS engine case cover - RG.ECC0217BK.

    Learn More
    $90.95

  14. SW-MOTECH Sprocket Cover For Suzuki SV650

    SW-MOTECH Sprocket Cover For Suzuki SV650 '17

    Discover how easy it is to add a little customization to your Suzuki SV650 is with the SW-MOTECH Sprocket Cover. Sporting a classic look this aftermarket accessory suits the styling of your V-twin Sportbike. SW-MOTECH fabricates the cover using black powdercoated aluminum. Simply bolt the SW-MOTECH sprocket cover using the existing mounting points on your motorcycle. Ride away in style with SW-MOTECH! Learn More
    $47.95

  15. R&G Race Series Engine Case Covers for Ducati 959 Panigale '16 | 2 Piece Kit

    R&G Race Series Engine Case Covers for Ducati 959 Panigale '16-'17 with Racing Fairings | 2 Piece Kit

    AMA Racing Approved

    The R&G race series engine case covers for Ducati 959 Panigale '16-'17 with race fairings - 2 piece kit provides protection to reduce the risk of damaging the very vulnerable and exposed sections of the motor in the event of a fall or slide. Hearty molded polypropylene mounts directly over the factory unit without removing anything more than a few bolts. These essential engine covers are 4 mm thick to resist wear and impacts while an replaceable slider puck at the impact face provides even more protection to prevent wear through. The pucks themselves can be quickly replaced after an incident so you can get you back on the road/track without replacing the whole unit. Installing these case covers are simple as there is no need to replace gaskets or lose any oil. No drilling, cutting or sanding is required for proper fitment. Invest in proper protection for your Panigale and install a set of race series engine case covers from R&G! 

    Learn More
    $217.95

  16. R&G Engine Case Cover Kit for Yamaha YZF R6 race version

    R&G Engine Case Cover Kit for Yamaha YZF R6 '08-'17 | 3 Piece Kit, Race Version

    Protect the heart of your Yamaha YZF R6 with an R&G Racing Engine Case Cover Kit. Robust 4 mm thick polypropylene bolts directly to the original equipment with no need to replace gaskets or lose a drop of oil. These essential case covers absorb energy during an impact with the ground to minimize the chance of cracking while also resisting abrasion to prevent wear through during a slide. No drilling, cutting or any other modifications are necessary and all hardware is included. Learn More
    $219.95

  17. R&G Race Series Engine Case Cover Kit for Honda CBR1000RR /SP/SP2

    R&G Race Series Engine Case Cover Kit for Honda CBR1000RR /SP/SP2 '17 | 2 Piece

    The R&G Race Series engine case cover kit for Honda CBR1000RR /SP/SP2 '17 | 2 piece is designed to provide the highest level of protection for the expensive OEM cases in the event of a fall or spill. Hearty 4mm Polypropylene yields exceptional impact absorption and abrasion resistance. These premium Race Series case covers beef up the armored performance with the addition of replaceable slider pucks at the impact face for even greater prevention of wear through. After a fall or slide, just the slider puck itself can be replaced to restore full protective capabilities in only a few minutes. The Race Series cover kit is strongly advised for track day warriors and street riders as well since this somewhat inexpensive investment can save some serious money versus replacement of the costly magnesium case covers.

    Mounting is painless as the original bolt holes can be reused with the provided replacement hardware without the need to perform any modifications. The R&G covers fit directly over the originals without the need to replace any gaskets or even spill a drop of oil. Total installation time is less than 5 minutes. Install the R&G Race Series engine case cover kit and ride into the sunset with confidence knowing your CBR is securely protected!

    Learn More
    $192.95

  18. R&G Race Series Engine Case Cover Kit For Triumph Daytona 675, Street Triple & Street Triple R | RHS

    R&G Race Series Engine Case Cover Kit For Triumph Daytona 675 '13-'16, Street Triple & Street Triple R '13-'17 | 2 Piece Kit

    The R&G Race Series engine case cover kit for Triumph Daytona 675, Street Triple & Street Triple R is designed to provide the highest level of protection for the expensive OEM cases in the event of a fall or spill. Hearty 4mm Polypropylene yields exceptional impact absorption and abrasion resistance. This premium Race Series case cover kit beefs up the armored performance with the addition of replaceable slider pucks at the impact face for even greater prevention of wear through. After a fall or slide, just the slider puck itself can be replaced to restore full protective capabilities in only a few minutes. The Race Series cover kit is strongly advised for track day warriors and street riders as well since this somewhat inexpensive investment can save some serious money versus replacement of the costly magnesium case covers.

    Mounting is painless as the original bolt holes can be reused with the provided replacement hardware without the need to perform any modifications. The R&G covers fit directly over the originals without the need to replace any gaskets or even spill a drop of oil. Total installation time is less than 5 minutes. Install the R&G Race Series engine case cover kit and ride into the sunset with confidence knowing your Daytona 675 or Street Triple/R is securely protected!

    Learn More
    $185.95

  19. R&G Engine Case Covers for Ducati 959 Panigale

    R&G Engine Case Covers for Ducati 959 Panigale '16-'17 | 2 Piece Kit

    The R&G engine case covers for Ducati 959 Panigale - 2 piece kit protects the vulnerable sections of the motor to significantly reduce the risk of damage in a fall or slide. Robust 4mm polypropylene is utilized for its excellent abrasion resistance and impact absorption. The design of these low profile case covers maximizes cornering clearance and lean angles. Installation is simple and only requires removal of just a few bolts so each unit can go over the factory equipment without the need to replace gaskets or lose any oil. Don't let your bank account take the hit when your Panigale goes down, invest in a set of R&G engine case covers!

    Learn More
    $204.95

  20. R&G Engine Case Cover Kit for Honda CBR1000RR /SP/SP2

    R&G Engine Case Cover Kit for Honda CBR1000RR /SP/SP2 '17 | 2 Piece

    The R&G engine case cover kit for Honda CBR1000RR /SP/SP2 '17 | 2 piece is designed to reduce the risk of damage by protecting the vulnerable and expensive OEM magnesium covers in the event of a fall or slide. Hearty 4 mm thick Polypropylene absorbs impacts and resists abrasions so a breakage or wear through doesn't cause oil to leak out of the motor while also keeping dirt and debris from contaminating internals. This essential case cover kit is an excellent investment at a relatively small cost when you consider what it would cost to replace the original magnesium engine cases or even worse; an engine rebuild. Installation is simple without the need to replace gaskets or even spill a drop of oil. Each case cover mounts over the original cases and utilizes some of the factory bolt holes to secure them in place. Extended replacement hardware is included and no drilling, cutting or any other modifications are required. Preserve the heart and soul of your CBR with the 2 piece engine case cover kit from the protection experts at R&G! Learn More
    $179.95

  21. R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R | 2 Piece

    R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R '17 | 2 Piece

    The R&G engine case cover kit for GSX-R1000 & GSX-R1000R '17 | 2 piece provides complete protection for the vulnerable clutch and stator cover to reduce the risk of damage in the event of a fall or slide. Robust Polypropylene construction adds minimal thickness (4mm) so lean angles are not compromised while providing impact absorption and abrasion resistance. These valuable case covers mount directly over the factory clutch and stator cover without replacing any gaskets or even losing a single drop of oil. High quality replacement hardware makes use of the factory bolt holes with absolutely no drilling or any other modifications. 

    This kit is highly recommended as an investment for every motorcycle used on the track or the street, especially with the price tag of an OEM replacement cover or an engine rebuild. Even a small spill could cause a wear through, loss of oil or debris contamination that can result in catastrophic motor failure. Ride on in confidence knowing your GSXR is properly protected with the engine case cover kit from the preservation specialists at R&G!

    Learn More
    $179.95

  22. R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R | 3 Piece

    R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R '17 | 3 Piece

    The R&G engine case cover kit for Suzuki GSX-R1000 & GSX-R1000R '17 | 3 piece provides impact and abrasion protection for the left hand and right hand side engine cases and water pump in the event of a fall or slide. Stout polypropylene construction is 4mm thick to reduce the risk of damage in an impact and prevent wear through in a low side. These high quality case covers mount directly over the factory covers without the need to lose a drop of fluid or replace gaskets. Drilling or any other modifications are not necessary as a select few of the same bolt holes are utilized.

    When you consider the replacement cost of original Suzuki engine covers and a new water pump, this 3 piece kit is a very wise investment for any track or street going motorcycle. Without this set a small slide could easily compromise the motor causing oil/coolant loss and even worse, cause debris to enter the motor and require a complete rebuild. Don't leave your GSX-R vulnerable to injuries, keep it safe with a 3 piece case cover kit from the preservation professionals at R&G!

    Learn More
    $265.95

  23. R&G Engine Case Cover Kit for Kawasaki Z900

    R&G Engine Case Cover Kit for Kawasaki Z900 '17-'18 | 3 Piece

    The R&G engine case cover kit for Kawasaki Z900 provides complete protection of the vulnerable engine sides in the event of a fall or slide. Robust 4mm thick polypropylene construction adds minimal thickness with abrasion resistance and impact absorption to prevent direct contact with the pavement. Installation is straight-forward as the original equipment does not need to be removed or modified, simply bolt on utilizing the existing mounting holes. These essential case covers are a very wise investment when you consider the repair and replacement cost of factory original parts or worse; an engine rebuild. If your unprotected motor contacts the ground in a fall it can easily crack or wear through to the point where oil is spilling out and dirt/debris get in. Don't leave the heart of your Z900 at risk, protect it with this 3 piece engine case cover kit from R&G! Learn More
    $238.95

  24. R&G Engine Case Cover Kit For Ducati SuperSport

    R&G Engine Case Cover Kit For Ducati SuperSport '17 | 3 Piece Kit

    The R&G engine case cover kit for Ducati SuperSport | 3 piece provides impact and abrasion protection for the original left hand side water pump and both the left hand and right hand side engine cases in the event of a fall or slide. Stout polypropylene construction is 4mm thick to reduce the risk of damage in an impact and prevent wear through in a low side. These high quality case covers mount directly over the factory covers without the need to lose a drop of fluid or replace gaskets. Drilling or any other modifications are not necessary as a select few of the same bolt holes are utilized.

    When you consider the replacement cost of original Ducati engine covers and a new water pump, this 3 piece kit is a very wise investment for any track or street going motorcycle. Without this set a small slide could easily compromise the motor causing oil/coolant loss and even worse, cause debris to enter the motor and require a complete rebuild. Don't leave your SuperSport vulnerable to injuries, keep it safe with a 3 piece case cover kit from the crash protection professionals at R&G!

    Learn More
    $242.95

  25. R&G Race Series Engine Case Cover for KTM RC 390 '17 | RHS

    R&G Race Series Engine Case Cover for KTM RC 390 '17 | RHS

    The R&G Race Series engine case cover for KTM RC 390 | RHS dramatically reduces the risk of damage to the OEM engine cover during a fall or slide. Stout 4 mm thick polypropylene construction is abrasion resistant and impact absorbing to help prevent road rash, cracking, or other dangerous destruction. This top-of-the-line case cover takes protection a step further with the addition of a replaceable slider puck at the impact face for even greater wear resistance. The puck can also be replaced after a small spill so you can get back on the road quickly with fully restored protection. Installation is very straightforward using the existing mounting holes and extended hardware, no modifications needed. Invest in superior protection for your RC 390 with the Race Series engine case cover from R&G! Learn More
    $107.95

  26. R&G Racing Series Engine Case Cover Kit for KTM RC 390 | 2 Piece

    R&G Racing Series Engine Case Cover Kit for KTM RC 390 '15-'17 | 2 Piece

    The R&G Racing Series engine case cover kit for KTM RC 390 | 2 piece adds essential protection to the vulnerable exposed sections of motor in the event of a fall or slide. Robust polypropylene construction is 4mm thick for outstanding abrasion resistance and impact absorption. These top shelf racing series covers up the ante with a replaceable slider puck at the impact face for even greater wear through protection when sliding down the pavement. Installation is very simple without the need for drilling or permanent modifications. Simply bolt the case cover directly over the OEM engine covers with the supplied extended hardware. No need to mess with adhesives, gasket replacement or oil loss. Protect your KTM with the highest level of engine protection and add a set of Racing Series engine case covers from R&G! Learn More
    $172.95

  27. R&G Right Side Engine Case Cover for Select Ducati Motorcycles

    R&G Right Side Engine Case Cover for Select Ducati Motorcycles

    The R&G Engine Case Covers are AMA Racing Approved and are designed to protect your expensive engine from unwanted damage.

    Learn More
    $104.95

  28. R&G Race Series Engine Case Cover for Ninja 650 & Z650 | Left Side

    R&G Race Series Engine Case Cover for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Left Side

    The R&G race series engine case cover for Kawasaki Ninja 650 & Z650 | left side provides superior protection for the engine case and reduces the risk of damage in the event of a tip over or low side slide. Rugged 4mm Polypropylene construction absorbs impacts and resists abrasion to prevent deterioration and wear through of the original equipment. This top of the line race series engine case cover provides a superior level of protection with the use of a replaceable slider puck at the impact face for even greater resistance to damage over the standard case covers. In the event of a small incident, just the slider puck itself can be replaced to restore maximum protection in only minutes. This case cover is highly recommended for track day enthusiasts seeking the highest level of protection and for street riders looking to safeguard their investment.

    Modifications are not required for fitment, simply bolt on using the original mounting holes without the need to replace a gasket or lose a drop of oil. This left-side engine cover preserves the entire stator cover from top to bottom on the clutch lever side of the motorcycle. Relied upon by British Super Bike race teams and approved by the AMA for reducing the risk of oil spills on the track and minimizing the possibility of damage during an incident. Invest in proper protection for your Kawasaki and install a race series engine case cover from the protection experts at R&G!

    Learn More
    $99.95

  29. R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2

    R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2 '17 | Left Side

    The R&G Race Series engine case cover for Honda CBR1000RR /SP/SP2 '17 | left side provides a superior level of protection in the event of a fall, slide or crash. Robust 4mm Polypropylene construction delivers excellent impact absorption and abrasion resistance. The top shelf Race Series case cover ups the ante with a replaceable slider puck at the impact face to decrease the risk of wear through. After a small spill the slider puck itself can be replaced to restore maximum protection without missing more than a few minutes of riding. The Race Series cover is highly recommended for track day enthusiasts and street riders alike as a relatively small investment that can save some serious cash vs. replacing the OEM magnesium case covers.

    Fitment is simple as the factory bolt holes are utilized with supplied replacement hardware which requires no drilling or any other permanent modifications. Simply mount the R&G cover over the original unit without the need to spill a drop of oil or replace the gasket. A matching right side is available separately or save some cash and purchase both at the same time with the 2 piece kit. Keep your CBR safe with the very best protection available and install the Race Series engine case cover from the preservation experts at R&G!

    Learn More
    $106.95

  30. R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2 | Right Side

    R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2 '17 | Right Side

    The R&G Race Series engine case cover for Honda CBR1000RR /SP/SP2 '17 | right side provides the ultimate level of protection in the event of a tip over, or low side slide. Stout 4mm Polypropylene construction produces exceptional impact absorption and abrasion resistance. The high caliber Race Series case cover takes the defensive performance a step further with the addition of a replaceable slider puck at the impact face to provide even greater wear resistance. After a small incident, just the slider puck itself can be replaced in minutes to restore full protection. The Race Series cover is strongly recommended for track day enthusiasts and street riders alike as a relatively small investment that can save some serious cash vs. replacement of the expensive OEM case covers.

    Installation is easy as the factory bolt holes are utilized with extended replacement hardware which does not require drilling or any other permanent modifications. The R&G cover fits over the original without spilling a drop of oil or replacing the gasket. A matching left side is also available or save some cash by purchasing both at the same time with the 2 piece kit. Preserve your beautiful CBR with first-rate protection and install the Race Series engine case cover from the motorcycle protection experts at R&G!

    Learn More
    $106.95

  31. R&G Engine Case Cover Kit for KTM RC390

    R&G Engine Case Cover Kit for KTM RC 390 '17 | 2 Piece

    The R&G engine case cover kit for KTM RC 390 provides complete protection of the vulnerable engine sides in the event of a fall or slide. Robust 4mm thick polypropylene construction adds minimal thickness with abrasion resistance and impact absorption to prevent direct contact with the pavement. Installation is straight-forward as the original equipment does not need to be removed or modified, simply bolt on utilizing the existing mounting holes. These essential case covers are a very wise investment when you consider the repair and replacement cost of factory original parts or worse; an engine rebuild. If your unprotected motor contacts the ground in a fall it can easily crack or wear through to the point where oil is spilling out and dirt/debris get in. Learn More
    $163.95

  32. R&G Race Series Engine Case Cover Kit for BMW S1000R, S1000RR & S1000XR | 3 Piece

    R&G Race Series Engine Case Cover Kit for BMW S1000R '17-'18, S1000RR '17-'18 & S1000XR '17-'18 | 3 Piece

    This R&G Race Series engine case cover kit was developed to meet the standards and needs of both race teams and riders alike. Each unit is crafted from impact absorbing and abrasion resistant polypropylene with a replaceable puck or slider at the point of impact for even greater protection. If a fall does take place, just the "puck" can be replaced allowing the cover to be continually reused! The polypropylene is 4mm thick for strength, durability and sharp aesthetics, these right side covers are easy to install, by simply bolting on over the original engine casing. That's right! No messy adhesives needed for mounting! Ground clearance is not sacrificed with the low profile. Invest in proper protection for the heart and soul of your BMW and add a R&G Racing Series engine case cover kit! Learn More
    $250.95

  33. NEW
    TechSpec Pannier Cover Set for Hard Luggage Cases on BMW R1200GS LC Adventure | 3 Piece Kit

    TechSpec Pannier Cover Set for Hard Luggage Cases on BMW R1200GS LC Adventure '14-'18 | 3 Piece Kit

    The TechSpec Pannier Cover Set for Hard Luggage Cases on BMW R1200GS LC Adventure | 3 piece kit preserves the finish of your expensive original hard luggage cases from scratches and scrapes. Three low profile synthetic rubber pads are only 0.125 inches thick and precision cut for a perfect fit. These handy Pannier Covers create a convenient non-slip platform atop your aluminum hard luggage so you can put your phone, keys or other items without worrying about causing scratches or losing things as they slide off. The releasable self-adhesive backing makes installation a snap. Add protection, improve versatility and keep your top case looking like new with this Pannier Cover Set from TechSpec! Learn More
    $134.95

  34. R&G Engine Case Cover Kit for Triumph Speed Triple S '16-'18 & Speed Triple R '16-'18 | 2 Piece

    R&G Engine Case Cover Kit for Triumph Speed Triple S '16-'18 & Speed Triple R '16-'18 | 2 Piece

    The R&G engine case cover kit for Triumph Speed Triple S & Speed Triple R - 2 piece adds protection for the vulnerable left and right side engine cases with impact absorbing and abrasion resistant armor. Hearty 4 mm thick polypropylene is molded to fit directly over the OEM motor casing to preserve it from scrapes or breakage that could cause wear through and oil loss. If you go down these essential engine case covers could save you from having to replace your expensive factory cases and an even more expensive rebuild if pieces of the cover break off in the motor. Installation is simple and does not require replacement of gaskets or loss of fluids. Invest in proper protection for your Triumph with this engine case cover kit from R&G! Learn More
    $167.95

  35. R&G Engine Case Covers for Ducati XDiavel & XDiavel S - right cover

    R&G Engine Case Covers for Ducati XDiavel & XDiavel S '16-'17 | 2 Piece Kit

    The R&G engine case covers for Ducati XDiavel & XDiavel S 2 piece kit significantly enhance protection to reduce damage during a tip over, fall or slide. Robust 4 mm thick polypropylene bolts directly to the original equipment with no need to replace gaskets or lose a drop of oil. These essential case covers absorb energy during an impact with the ground to minimize the chance of cracking while also resisting abrasion to prevent wear through during a slide. No drilling, cutting or any other modifications are necessary and replacement hardware is provided. Invest in proper protection for the heart of your Ducati with engine case covers from R&G! Learn More
    $153.95

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 352 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Chat with us!