x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Search results for 'handle'

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 837 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. SW-MOTECH Centerstand Lifting Handle for Kawasaki KLR650 '08-'16

    SW-MOTECH Center Stand Lifting Handle for Kawasaki KLR650 '08-'17

    Use the SW-MOTECH centerstand lifting handle for Kawasaki KLR650 '08-'17 to provide a more secure holding point that assists in engagement of the centerstand. Strong tubular steel allows a full comfortable grip even while wearing gloves, and is powder coated black for a durable finish that is also resistant to corrosion. Enjoy enhanced control and reduced effort when engaging the centerstand with the handy lifting handle for your motorcycle! Learn More
    $24.95

  2. SALE
    Soft Handle for Givi Trekker Outback Cases

    Soft Handle for Givi Trekker Outback Cases

    The soft handle attaches to the hard loops and makes the pannier more balanced and easier to carry. Made from nylon strap, the soft handle attaches with D-rings and has hi-viz reflective material for additional visibility. Learn More
    $28.00 $25.20

  3. Carrying handle for TraX ALU-BOX sidecases (each)

    Carrying handle for TraX ALU-BOX sidecases (each)

    Attaches to the existing tie-down points on TraX ALU-BOX sidecases for easy carrying. Learn More
    $29.95

  4. Kaoko Cruise Control Suzuki GSX-R600, GSX-R750 &GSX-R1000 (With 16.8mm Handle Bar Inside Diameter)

    Kaoko Cruise Control Suzuki GSX-R600 '96-'17, GSX-R750 '96-'17 & GSX-R1000 '01-'16 (With 16.8mm Handle Bar Inside Diameter)

    Kaoko Cruise Controls are designed for speed maitenence and improved MPG for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. 

    Learn More
    $144.95

  5. Kaoko Throttle Lock Cruise Control for Honda CB600 Hornet '08-'10, CBF600 '07-'12, CB1000R '08-'16, CB1000, CB1000F '08-'09 & CB1300 | Models with 30mm OD bar weights and 17mm ID handle bars

    Kaoko Throttle Lock Cruise Control for Honda CB600 Hornet '08-'10, CBF600 '07-'12, CB1000R '08-'16, CB1000, CB1000F '08-'09 & CB1300 | Models with 30mm OD bar weights and 17mm ID handle bars

    Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Learn More
    $141.95

  6. Handlebar risers Honda Shadow, Valkyrie, Magna, VTX1300R, VTX1300S & Pacific Coast PC800 with 1-inch diameter handlebars

    Handlebar risers Honda Shadow, Valkyrie, Magna, VTX1300R, VTX1300S & Pacific Coast PC800 with 1-inch diameter handlebars

    The H121 risers fit Honda 1" diameter tube style handle bars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $64.95

  7. Rox Handlebar Risers With Extended Stem For 22mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles shown in clear anodized

    Rox Handlebar Risers With Extended Stem For 22mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles | 2in rise

    Rox Handlebar Risers with extended stem for 22mm bars on select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them.

    These handlebar risers feature an extended riser stem that works with many bikes that come with an angled OEM top clamp (e.g. Buell Ulysses), but technically will fit any 22mm tubular handlebar.

    They feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 7/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $105.00

  8. Rox Handlebar Risers For 22mm or 28mm Handlebars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles shown in machined aluminum

    Rox Handlebar Risers For 22mm or 28mm Handlebars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles | 2in Offset

    If your wrists, forearms or neck feel strained and fatigued while riding, you need Rox Handlebar Risers for 22mm or 28mm handlebars. The displacement offered by these risers will relieve the pressure and fatigue that occurs when your handlebar position isn't correct. Removing this pressure means less pain and longer rides, and don't we all want to ride longer?

    These adjustable risers pivot in two locations: where they clamp on to your handlebars, and where your bike clamps on to the risers. You get 2 inches of displacement that you can customize to your exact needs. Not only do they pivot, they're compatible with both 22mm (7/8 inch) and 28mm (1 1/8inch) handlebars. You now have the choice of keeping a standard handlebar or swapping to a fatbar. The combination of an aftermarket handlebar and pivoting risers allows for potentially infinite combinations and will get you riding in the most comfortable position possible.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in anodized black or machined aluminum finishes, ensuring that your ride remains beautiful—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any motorcycle that has a handlebar that measures 7/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $97.00

  9. Rox 4in Handlebar Risers For 1in Bars on Street Cruiser Motorcycles shown in chrome

    Rox Handlebar Risers For 1in Bars on Street Cruiser Motorcycles | 4in rise

    Rox 4in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for street and cruiser style motorcycles with OEM 1 inch tubular handlebars, these bar risers feature dual points of rotation that allow you to pivot your handlebars up and back approximately 4 inches. This adjustment relieves the pressure that builds on on your wrists, forearms and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these barbacks will get you riding in comfort again.

    Is 4 inches too much displacement? We also carry Rox 2in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles and Rox 3in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in three finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $119.95

  10. Rox 3in Handlebar Risers For 1in Bars on Street Cruiser Motorcycles shown in chrome finish

    Rox Handlebar Risers For 1in Bars on Street Cruiser Motorcycles | 3in rise

    Rox 3in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for street and cruiser style motorcycles with OEM 1 inch tubular handlebars, these bar risers feature dual points of rotation that allow you to pivot your handlebars up and back approximately 3 inches. This adjustment relieves the pressure that builds on on your wrists, forearms and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these barbacks will get you riding in comfort again.

    Is 3 inches not the correct displacement? We also carry Rox 2in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles and Rox 4in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in three finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $114.95

  11. Rox Handlebar Risers For 22mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles shown in aluminum

    Rox Handlebar Risers For 22mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles | 2in rise

    Rox Handlebar Risers for 22mm Bars on select BMW, Honda, Kawasaki, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. These ergonomic adjusters are designed specifically for standard 22mm handlebars and feature dual rotation points that allow you to pivot them up and back diagonally approximately 2in to relieve the pressure that can build up on your wrists, forearms, and neck. Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. Not only do they improve your riding position and comfort level, these barbacks look stylish on your machine.

    Learn More
    $89.00

  12. Rox Handlebar Risers for 28mm (1-1/8in) Bars With Extended Stem For Yamaha FZ-09 '14-'15 & XT1200Z Super Tenere '14-'15

    Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 '14-'17 & XT1200Z Super Tenere '14-'17 | 2in rise

    Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 & XT1200Z Super Tenere allow you to adjust the position of your handlebars, instead of adjusting your posture to them. The extended stem at the bottom of the risers is specifically designed for the angled bar clamps of the FZ-09 and the XT1200Z; The extension ensures that there is enough surface area for a secure mount. These ergonomics enhancing risers feature dual rotation points that allow you to pivot them up and back diagonally approximately 2in to relieve the pressure that can build up on your wrists, forearms, and neck. Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. Not only do they improve your riding position and comfort level, these barbacks look stylish on your machine. Learn More
    $119.95

  13. Rox 2in Handlebar Risers For 1in Bars on Street Cruiser Motorcycles shown in chrome finish

    Rox Handlebar Risers For 1in Bars on Street Cruiser Motorcycles | 2in rise

    Rox 2in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for street and cruiser style motorcycles with OEM 1 inch tubular handlebars, these bar risers feature dual points of rotation that allow you to pivot your handlebars up and back approximately 2 inches. This adjustment relieves the pressure that builds on on your wrists, forearms and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these barbacks will get you riding in comfort again.

    Is 2 inches of displacement not enough? We also carry Rox 3in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles and Rox 4in Handlebar Risers for 1in Bars on Street Cruiser Motorcycles.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in three finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $94.00

  14. Rox Handlebar Risers For 28mm (1-1/8in) Bars For Select BMW, KTM, Triumph & Ducati Motorcycles shown in natural aluminum

    Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles | 2in rise

    Rox Handlebar Risers for 28mm bars on select BMW, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for oversized handlebars and fatbars, they feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

    Crafted out of CNC machined billet 6060 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $97.00

  15. Handlebar risers (Honda VTX1800C & VTX1800 Retro)

    Handlebar risers (Honda VTX1800C & VTX1800 Retro)

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $89.95

  16. Handlebar risers (Suzuki Boulevard S50, S83, Intruder VS800, & VS1400 w/1-inch diameter handlebars

    Handlebar risers (Suzuki Boulevard S50, S83, Intruder VS800, & VS1400 w/1-inch diameter handlebars

    The risers replace the stock 1" tube type handlebar clamp-cap to raise the bars up 1 1/2" (37mm) and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Require no change in any control cables, wiring, or hoses. Learn More
    $89.95

  17. Handlebar risers for Suzuki GSX1300R Hayabusa '08-'17 | pair

    Handlebar risers for Suzuki GSX1300R Hayabusa '08-'17 | pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This is double the riser height of part# S222. This will help to relieve wrist and neck pain on long rides. Learn More
    $149.95

  18. Handlebar risers for Suzuki GSX1300R Hayabusa '08-'17 | pair

    Handlebar risers for Suzuki GSX1300R Hayabusa '08-'17 | pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $139.95

  19. SW-MOTECH Handlebar risers For BMW F700GS '12-'17 F800GS '08-'17 & F800GS Adventure '14-'17 | 30mm Silver

    SW-MOTECH Handlebar risers For BMW F700GS '12-'17 F800GS '08-'17 & F800GS Adventure '14-'17 | 30mm Silver

    SW-MOTECH Handlebar risers for your BMW F700GS, F800GS, and F800GS Adventure. Includes one pair of handlebar risers (30mm riser height) in silver. Learn More
    $52.95

  20. Gen-Mar Handlebar risers for Ducati Monster 620 '02-'13, Monster 750 '02-'13, & Monster 900 '02-'13 with 22mm bars [silver or black]

    Gen-Mar Handlebar risers for Ducati Monster 620 '02-'13, Monster 750 '02-'13, & Monster 900 '02-'13 with 22mm bars [silver or black]

    The risers are placed between the fork crown and the handlebars to raise the bars up 1-1/4" (32mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Available in both silver or black. Requires no change of any control cables, wiring, or hoses. Learn More
    $74.95

  21. SW-MOTECH Handlebar risers for select Aprilia, BMW, Honda, Kawaski, KTM, Suzuki, Triumph & Yamaha motorcycles | 20mm, 25mm, 30mm or 50mm

    SW-MOTECH Handlebar risers for select Aprilia, BMW, Honda, Kawaski, KTM, Suzuki, Triumph & Yamaha motorcycles | 20mm, 25mm, 30mm or 50mm

    Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. Learn More
    $62.95

  22. SW-MOTECH Handlebar Risers KTM 620 Adventure '96-'99, 950 Adventure '03-'06, 950 SM/SMR '05-'07, 990 Adventure '06-'13, 990 SM/SMR/SMT '07-13 & 690 Duke 4 '12-'15 | 30mm

    SW-MOTECH Handlebar Risers KTM 620 Adventure '96-'99, 950 Adventure '03-'06, 950 SM/SMR '05-'07, 990 Adventure '06-'13, 990 SM/SMR/SMT '07-13 & 690 Duke 4 '12-'15 | 30mm

    Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) or 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Learn More
    $39.95

  23. Handlebar risers (Triumph Sprint ST 955, '01-'04 / Sprint ST 1050, '05- / Sprint RS, '00-'03)

    Handlebar risers (Triumph Sprint ST 955, '01-'04 / Sprint ST 1050, '05- / Sprint RS, '00-'03)

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $109.95

  24. Handlebar risers KTM LC4 625 SXC & Husqvarna with 1-1/8" MAGURA/ProTaper Bars by SW-MOTECH- pair

    Handlebar risers KTM LC4 625 SXC & Husqvarna with 1-1/8" MAGURA/ProTaper Bars by SW-MOTECH- pair

    Provides a more upright, comfortable riding position by raising the original 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Perfect for use with oversize handlebars (ProTaper, Magura, etc.). Learn More
    $52.95

  25. SW-MOTECH Handlebar Barback Risers for Select Aprilia, BMW, Honda, Kawasaki, KTM, Suzuki, Triumph & Yamaha Motorcycles | 31mm Rise - 22mm Back

    SW-MOTECH Handlebar Barback Risers for Select Aprilia, BMW, Honda, Kawasaki, KTM, Suzuki, Triumph & Yamaha Motorcycles | 31mm Rise - 22mm Back

    This set of SW-MOTECH Handlebar riser bar backs and top clamps provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 31mm and move them back 22mm, producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.

    Learn More
    $103.95

  26. Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles shown in clear anodized

    Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles | 2in rise Clear Anodized

    Rox Handlebar Risers for 28mm bars on select BMW, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for oversized handlebars and fatbars, they feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $97.00

  27. Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles shown in aluminum

    Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles | 2in rise Aluminum

    Rox Handlebar Risers for 28mm bars on select BMW, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for oversized handlebars and fatbars, they feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

    In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $94.00

  28. Handlebar risers Ducati Monster S2R / S4R all years for 28mm handlebars

    Handlebar risers Ducati Monster S2R / S4R all years for 28mm handlebars

    This handlebar riser only fits 1-1/8" (28mm) diameter bars. The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (31mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $74.95

  29. SW-MOTECH Barback Handlebar Risers for BMW R1200GS LC '13-'17 & R1200GS LC Adventure '14-'17 | 32mm Rise - 25mm Back - Black or Silver

    SW-MOTECH Barback Handlebar Risers for BMW R1200GS LC '13-'17 & R1200GS LC Adventure '14-'17 | 32mm Rise - 25mm Back - Black or Silver

    Adjust your handlebars for more comfort during longer trips and more control during technical riding. Especially good for off-road riding where you'll want to stand up for better balance and control. If you have long legs and short arms, here's the mod for you—short of corrective surgery your HMO probably doesn't cover anyway. Learn More
    $163.95

  30. Handlebar risers (Triumph cruisers, with 1" handlebars)

    Handlebar risers (Triumph cruisers, with 1" handlebars)

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $74.95

  31. SW-MOTECH Handlebar riser barbacks for KTM 950 Adventure, 990 Adventure, 990SMT & 1290 Super Duke GT '17 | 30mm Rise & 22mm Back

    SW-MOTECH Handlebar riser barbacks for KTM 950 Adventure, 990 Adventure, 990SMT & 1290 Super Duke GT '17 | 30mm Rise & 22mm Back

    Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More
    $103.95

  32. Handlebar risers (Honda VTX1300C)

    Handlebar risers (Honda VTX1300C)

    The risers are placed between the fork crown and the base of the handlebars to raise the bars up 2 1/2" (63mm) and back 1 5/8" (41mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. This riser is for the models with a one piece handlebar and riser. Learn More
    $89.95

  33. SW-MOTECH 40mm Handlebar Riser For BMW R1200GS LC '13-'17 & R1200GS LC Adventure '14-'17

    SW-MOTECH 40mm Handlebar Riser For BMW R1200GS LC '13-'17 & R1200GS LC Adventure '14-'17

    SW-MOTECH has raised the bars (literally) with these new 40mm handlebar risers for the BMW R1200GS LC & R1200GS LC Adventure, increasing comfort by providing a more upright riding position. Available in either powder-coated black or bead blasted aluminum for strength and durability. Learn More
    $130.95

  34. Handlebar risers Honda ST1300 - pair

    Handlebar risers Honda ST1300 - pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $129.95

  35. Handlebar risers (Yamaha FZR600, '89-)

    Handlebar risers (Yamaha FZR600, '89-)

    The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $75.95

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 837 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5