x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Search results for 'LED'

FILTER OPTIONS

Grid List

per page

Items 141 to 171 of 408 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. Techmount Light Mount Kit (pair) for 7/8", 1", 28mm, 1.25", 21.3mm, and 26.9mm crash bars and handlebars - Black or Silver

    Techmount Light Mount Kit (pair) for 7/8", 1", 28mm, 1.25", 21.3mm, and 26.9mm crash bars and handlebars - Black or Silver

    This light mount kit allows installation of a light with an M10 mounting point onto nearly all handlebar or crash bar tubes from 0.85" to 1.25" in diameter. Works with all Denali and most PIAA light kits. Black or Silver finish. Learn More
    $54.95

  2. Denali DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    Denali DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    The large 10° optic in the Denali DR1 maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DR1 is ideal for night riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp, the Denali DR1 lights throw a blazing beam of light 695 feet down the road. That’s over 4 times further than your typical motorcycle high beam.

    Want more from your Denali DR1 Lights? Grab a set of Snap-On Beam Filters to change the beam pattern and prolong the lifespan of the lights.

    Learn More
    $349.99

  3. R&G "Tail Tidy" fender eliminator for Honda CBR600RR '13-'16

    R&G "Tail Tidy" fender eliminator for Honda CBR600RR '13-'16

    Put an end to those big rear fender blues and enjoy a trim and clean tail with R&G's Tail Tidy Fender Eliminator Kit and License Plate Holder. Powder coated for sleek looks and crafted from stainless steel for superior strength, these fender eliminators are an adventure motorbike bike essential. This model can be fitted with the original manufacturer's indicators, (as shown in image) or the lower profile R&G Incandescent Micro Indicators, R&G LED Micro Indicators or the R&G Aero LED Indicators for an even sleeker profile.

    If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G Resistors (RG.RGR0001 or RG.RGR0002).

    Learn More
    $172.95

  4. Additional power harness for side case application (bi-color kits)

    Additional power harness for side case application (bi-color kits)

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your GIVI cases with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer cases between bikes and have all of the benefits of your LED light kit on each bike! 

    Learn More
    $79.00

  5. R&G "Tail Tidy" fender eliminator Buell EBR 1190RX '14

    R&G "Tail Tidy" fender eliminator Buell EBR 1190RX '14

    Drop some weight and tidy up your bike's rear end with R&G Tail Tidy/License Plate Holder. This light weight product is made from stainless steel and powder coated black for durability and a high quality finish. Learn More
    $115.95

  6. R&G "Tail Tidy" License Plate Holder for Honda CBR300R '14-'15

    R&G "Tail Tidy" License Plate Holder for Honda CBR300R '14-'16

    Spruce up your bike's back side with this R&G "Tail Tidy" License Plate Holder.  Crafted from pressed aluminum, this item includes a rear number plate illuminator. Powder coated black for long term use and a snazzy finish. Designed using the latest 3D scanning technology for a precise fit.

    Compatible with both manufacturer or the R&G Incandescent Micro Indicators, R&G LED Micro Indicators or the R&G Aero LED Indicators for an even sleeker profile. Enhance the rear end of your CBR300R with this high quality Tail Tidy from R&G!  If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G Resistors (RG.RGR0001 or RG.RGR0002).

    Learn More
    $108.95

  7. R&G  "Tail Tidy"  License Plate Holder for KTM KTM RC125 '15

    R&G "Tail Tidy" License Plate Holder for KTM RC125 '15

    Neaten up the back end of your bike with the R&G "Tail Tidy" License Plate Holder!  

    Powder coated for sleek looks and crafted from aluminium for superior strength, these fender eliminators are an adventure motorbike bike essential. The black tail tidy license plate holder is easy to install and completely enhances the look of your rear end. 

    This model can be fitted with the original manufacturer's indicators, (as shown in image) or the lower profile R&G Incandescent Micro Indicators, R&G LED Micro Indicators or the R&G Aero LED Indicators for an even sleeker profile. 

    If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G Resistors (RG.RGR0001 or RG.RGR0002).

    Learn More
    $108.95

  8. R&G Stainless Steel "Tail Tidy" for Ducati Scrambler 803 '15 Classic

    R&G Stainless Steel "Tail Tidy" for Ducati Scrambler 803 Classic '15-'16

    The R&G Stainless Steel "Tail Tidy is the ultimate fender eliminator for the Ducati Scrambler Classic. Remove the bulky OEM fender with this low profile unit that is much more rugged and sleek to compliment the looks of your rig. This classy laser cut tail tidy is the perfect solution for hanging the license plate on the Scrambler.  The low profile stainless steel construction is compatible with the factory turn signals, or the lower profile R&G Incandescent Micro Indicators, R&G LED Micro Indicators or the R&G Aero LED Indicators for an even cleaner look.

    If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G Resistors (RG.RGR0001 or RG.RGR0002).  R&G does recommend a set of RG.RGR0001 when installing the RG.LP0187SS to generate a proper flash rate.

    Learn More
    $172.95

  9. DENALI M5 Headlight Module Adapter Kit for Select Yamaha Motorcycles

    DENALI M5 Headlight Module Adapter Kit for Select Yamaha Motorcycles

    The DENALI M5 Headlight Module Adapter Kit for Select Yamaha Motorcycles is a powder coated steel bracket that allows fitment of the DENALI M5 LED Headlight Module to the Yamaha '14-'16 Bolt, '08-'16 Raider, '05-'09 Road Star Midnight Warrior, '02-'09 Road Star Warrior, '11-'16 Stryker & '09-'16 V-Star 950. Drop the LED light inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock LED headlight. The unique design of the adapter kit and black chrome finish of the optics will give your bike that modern custom look while also increasing your visibility to oncoming traffic even during daylight.

    Learn More
    $29.99

  10. DENALI Wiring Adapter for H4 to H9/H11 Harness

    DENALI H9/H11 to H4 Headlight Wiring Adapter

    The DENALI H9/H11 to H4 headlight wiring adapter permits direct plug and play connection of the M5 or M7 LED headlight module to the OEM connectors of motorcycles with an original H9 and H11 split LED headlight. Simplify your headlight installation without the need to splice any wires. This handy little adapter allows your motorcycle's factory H9 and H11 connectors for the original split beam headlight to plug into the female H4 plug of the DENALI M5 or M7 LED headlight module.

    Learn More
    $39.99

  11. R&G "Tail Tidy" Fender Eliminator for Suzuki SV650 '17

    R&G "Tail Tidy" Fender Eliminator for Suzuki SV650 '17

    The R&G "Tail Tidy" fender eliminator for Suzuki SV650 '17 replaces the bulky factory tag holder with a much sleeker unit that significantly improves the motorcycles appearance. Sturdy powder coated stainless steel also provides a more secure foundation compared to the floppy factory plastic hardware. This slick fender eliminator is compatible with the original turn signals or upgrade to the R&G Micro LED indicators for an even lower profile. An LED plate light is integrated into the design for a clean modern look. Sharpen the rear end of your SV650 with this "Tail Tidy" from R&G!

    Learn More
    $115.95

  12. R&G "Tail Tidy" Fender Eliminator For Triumph Speed Triple R ’16 & Speed Triple S ‘16

    R&G "Tail Tidy" Fender Eliminator For Triumph Speed Triple R '16 & Speed Triple S '16

    The R&G "Tail Tidy" fender eliminator removes the bulky factory tag holder and replaces it with a lower profile unit that installs under the rear seat providing a stylishly sporty look. Sturdy stainless steel construction supports the license plate and factory turn signals and can also work with the upgraded Micro LED indicators or Aero LED indicators for an even sleeker appearance. This "Tail Tidy" is black powder coated for a durable and corrosion resistant finish that will continue to look great for years to come. Installation is simple, requiring no modifications, simply bolt-on and go. Tidy up the tail of your motorcycle with this fender eliminator from R&G!

    If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G resistors (RG.RGR0001 or RG.RGR0002).

    Learn More
    $165.95

  13. DENALI D4 Flood & Spot Hybrid LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    DENALI D4 Flood & Spot Hybrid LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount

    Simply put; the DENALI D4 is a beast. It is our most powerful and most versatile light packing the punch of four DENALI DM lights in one rugged housing. The four LED pod is equipped with two 60° elliptical flood lenses and two 10° spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. Consuming only 20 watts of power per lamp, the DENALI D4 lights throw a blazing beam of light 550 feet down the road in front of you. That’s over 3 times further (and way wider) than your typical motorcycle high beam.

    Learn More
    $309.99

  14. R&G Tail Tidy Licence Plate Holder for Yamaha FZ-07 '14-'16

    R&G Tail Tidy Licence Plate Holder for Yamaha FZ-07 '14-'16

    Drop some weight and tidy up your bike's rear end with R&G Tail Tidy/License Plate Holder. This light weight product is made from aluminum and powder coated black for durability and a high quality finish.

    Learn More
    $129.95

  15. R&G "Tail Tidy" License Plate Holder for BMW S1000RR '15-

    R&G "Tail Tidy" License Plate Holder for BMW S1000RR '15-'16

    Clean up the rear end of the BMW S1000RR with a powder coated Aluminum R&G "Tail Tidy" License Plate Holder Learn More
    $144.95

  16. R&G "Tail Tidy" License Plate Holder for Yamaha YZF R1 '15-'16

    R&G "Tail Tidy" License Plate Holder for Yamaha YZF R1 '15-'16

    Clean up the rear end of the Yamaha YZF R1 with a powder coated stainless steel R&G Tail Tidy/License Plate Holder

    Learn More
    $165.95

  17. R&G "Tail Tidy" License Plate Holder for Kawasaki Versys 650 '15

    R&G "Tail Tidy" License Plate Holder for Kawasaki Versys 650 LT & ABS '15-'16

    Neaten up the back of the Kawasaki Versys 650 LT with a powder coated stainless steel R&G Tail Tidy/License Plate Holder.

    Learn More
    $115.95

  18. DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    The ultra compact size of the DM light is ideal for when you want to maintain a clean inconspicuous look without sacrificing brightness. The DM is also ideal for daytime visibility as the smaller optic intensifies the brightness of light when looking at the light from the front. Consuming only 5 watts of power per lamp, the DENALI DM Lights throw a blazing beam of light 240 feet down the road in front of you. That's 85 feet further than your typical motorcycle high beam.

    All DENALI LED Lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours. That's 6 years without ever being shut off. Yes we went overboard, it's what we do.

    Making our light kits easy to mount and install on your motorcycle is a top priority for us. Every light kit includes a purpose built motorcycle wiring harness, universal M8 mounting bracket and detailed wiring diagrams that are simple and easy to understand. Bike specific light mounts are also available for many popular bike models. 

    Learn More
    $289.99 $249.99

  19. DENALI M7 DOT LED Headlight Module | 7.0" Round - Black Chrome

    DENALI M7 DOT LED Headlight Module | 7.0" Round - Black Chrome

    The DENALI DOT approved M7 LED Headlight module is a direct plug and play replacement to the original 7 inch sealed beam headlight on your motorcycle. It features a super wide low beam, piercing high beam, and halo day time running light. Drop this headlight module inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock LED headlight. The unique design and black chrome finish of the optics will give your bike that modern custom look while also increasing your visibility to oncoming traffic even during daylight.

    Learn More
    $429.00

  20. R&G "Tail Tidy" Fender Eliminator For Honda Grom MXS125 '16-'17

    R&G "Tail Tidy" Fender Eliminator For Honda Grom MXS125 '16-'17 For Use With R&G Micro Indicators

    Radically transform the back end of your Honda Grom by installing the R&G "Tail Tidy" fender eliminator. Simply remove your clunky original license plate holder and replace it with this sturdy and sporty aftermarket option. The "Tail Tidy" is manufactured using stainless steel for a more secure mounting solution than the factory holder and black powder coated for a great looking and durable finish. The R&G fender eliminator also gets rid of the large factory turn signals. There are 3 types of micro turn signals available for you to choose from; R&G Incandescent Micro Indicators, R&G LED Micro Indicators or the R&G Aero LED Indicators. Replace your substantial original tag holder and turn signals with the sleeker, stronger and great looking R&G "Tail Tidy" fender eliminator and lower profile R&G micro indicators.

    If your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the R&G resistors (RG.RGR0001 or RG.RGR0002).

    Learn More
    $172.95

  21. Denali D4 LED Light Pod with M8 Mount | Single Pod

    Denali D4 LED Light Pod With M8 Mount | Single Pod

    Simply put; the Denali D4 is a beast. It is our most powerful and most versatile light packing the punch of four Denali DM lights in one rugged housing. The four LED pod is equipped with two 60° elliptical flood lenses and two 10° spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. Consuming only 20 watts of power per lamp, the Denali D4 lights throw a blazing beam of light 550 feet down the road in front of you. That’s over 3 times further (and way wider) than your typical motorcycle high beam.

    Learn More
    $150.99

  22. DENALI M7 DOT LED Headlight & Adapter Bracket Kit for Suzuki Boulevard & Volusia

    DENALI M7 DOT LED Headlight & Adapter Bracket Kit for Suzuki Boulevard C50 '05-'09, Boulevard C50 '11-'16, Boulevard C90 '05-'09, Boulevard C90 '11-'16 & Volusia '01-'04

    Brighten your next motorcycle ride with the DENALI M7 DOT LED Headlight and adapter bracket kit. Designed specifically for the Suzuki Boulevard C50 '05-'09, Boulevard C50 '11-'16, Boulevard C90 '05-'09, Boulevard C90 '11-'16 and Volusia '01-'04, this replacement headlight assembly is simple to install and looks great. Featuring a super wide low beam, piercing high beam and halo daytime running lights, this LED setup will throw light three times further down the road than your stock halogen headlight and twice as far as a stock LED headlight. With a unique design and black chrome finish the DENALI M7 DOT LED headlight and adapter bracket kit will give your motorcycle a modern custom look while also increasing your visibility. Learn More

    From: $39.99

    To: $468.99

  23. DENALI M7 DOT LED Headlight & H9/H11 To H4 Wiring Adapter Kit for Motorcycles with H9/H11 Connection Headlights

    DENALI M7 DOT LED Headlight & H4 Wiring Adapter Kit for Motorcycles with H9/H11 Connections

    With a piercing high beam, super wide low beam and halo running lights, the DENALI M7 DOT LED headlight and H4 wiring adapter kit will throw light three times as far as stock halogen and twice as far as stock LED headlights. Designed for motorcycles with H9/H11 connection lights, this upgrade kit specifically fits Harley-Davidson CVO Road King ’14-’16, Road King ’14-’16, Street Glide ’14-’16 and Street Glide Special ’14-’16 touring cruisers. With a unique design and black chrome finish, your motorcycle will stand out night or day with the DENALI M7 DOT LED headlight and H4 wiring adapter kit.

    Learn More

    From: $39.99

    To: $468.99

  24. Denali DX Xtreme Spot Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount

    Denali DX Xtreme Spot Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount

    The large 10° optic in the DX maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DX is ideal for night riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp, the Denali DX lights throw a blazing beam of light 695 feet down the road in front of you. That’s over 4 times further than your typical motorcycle high beam.

    Learn More
    $389.99

  25. DENALI M7 DOT LED Headlight & Adapter Bracket Kit for Suzuki DR-Z400 & DR650

    DENALI M7 DOT LED Headlight & Adapter Bracket Kit for Suzuki DR-Z400 '03-'17, DR-Z400E '03-'16, DR-Z400S '03-'17, DR-Z400SM '03-'17 & DR650 '03-'17

    Brighten the road or trail with the DENALI M7 DOT LED Headlight and adapter bracket kit. Designed specifically for the Suzuki Dr-Z400 '03-'17, DR-Z400E '03-'16, DR-Z400S '03-'17, DR-Z400SM '03-'17 & DR650 '03-'17, this replacement headlight assembly is simple to install and looks great. Featuring a super wide low beam, piercing high beam and halo daytime running lights, this LED setup will throw light twice as far as a stock LED headlight and three times further down the road than a stock halogen headlight. With a unique design and black chrome finish the DENALI M7 DOT LED headlight and adapter bracket kit will increase your visibility and give your motorcycle a modern custom look. Learn More

    From: $30.00

    To: $459.00

  26. DENALI DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    Denali DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    The large 10° optic in the DENALI DR1 maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DR1 is Ideal fornight riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp. The DENALI DR1 Lights throw a blazing beam of light 695 feet down the road. That's over 4 times further than your typical motorcycle high beam.

    All Denali LED lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours, that's 6 years without ever being shut off. Yes we went overboard, it's what we do.

    Want more from your DENALI DR1 Lights? Grab a set of Snap-On Beam Filters to change from spot to a wide flood or elliptical driving beam.

    Making our light kits easy to mount and install on your motorcycle is a top priority for us. Every light kit includes a purpose built motorcycle wiring harness, universal M8 mounting bracket and detailed wiring diagrams that are simple and easy to understand. Bike specific light mounts are also available for many popular bike models.

    Learn More
    $429.99 $349.99

  27. DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount

    DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount

    Don't let the small size and weight fool you, with an effective beam distance of 240 feet, these little buggers are BRIGHT! Learn More
    $249.99

  28. Standard Motorcycle Visibility Package for BMW F800GS '08-'12

    Standard Motorcycle Visibility Package for BMW F800GS '08-'12

    Light up your adventure and increase the amount your motorcycle will be seen with the Twisted Throttle Standard Motorcycle Visibility Package. Tapping into our real-life motorcycle riding experience, we have brought together the best products that we know will provide the best auxiliary lighting and means for getting your motorbike visible to other vehicles on the road. Whether you are riding to work or around the world, this ready-to-order lights and visibility package will provide added safety by helping to keep important things noticed on your next ride. Learn More

    From: $24.95

    To: $404.94

  29. SALE
    Givi E112 LED Brakelight/Stoplight Kit for E55 Maxia 3 Topcase

    Givi E112 LED Brakelight/Stoplight Kit for E55 Maxia 3 Topcase

    LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack, Monorack, and E250 mounting plates). Learn More
    $65.00 $58.50

  30. SW-Motech Auxiliary Light Mount for Triumph Tiger 800 '10-'14, 800 XC '11-'16, 800 XCx '15-'16, 800 XCa '15-'16, 800 XR '15-'16, 800 XRx '15-'16 & 800 XRt '16

    SW-Motech Auxiliary Light Mount for Triumph Tiger 800 '10-'14, 800 XC '11-'16, 800 XCx '15-'16, 800 XCa '15-'16, 800 XR '15-'16, 800 XRx '15-'16 & 800 XRt '16

    Bike-specific mounting brackets for adding auxiliary driving and/or fog lights. Designed for the Triumph Tiger 800 models for use with Denali LED Lighting or similar accessory lighting such as the PIAA Line. All mounting hardware and instructions included. Powdercoated black. Learn More
    $74.95

  31. Interphone Motion Camera (Discontinued)

    Interphone Motion Camera (Discontinued)

    Note: The Interphone Motion Camera has been discontinued and is no longer able to be ordered.

    Interphone Motion Camera is perfect for recording high quality video in the form of an ultra-light, compact camera. Completely waterproof to a depth of 20 meters. Equipped with two extra-bright LEDs for night-time filming. Learn More
    $299.99

FILTER OPTIONS

Grid List

per page

Items 141 to 171 of 408 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7