Provides a more upright, comfortable riding position by raising the original 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Perfect for use with oversize handlebars (ProTaper, Magura, etc.).For use with original top clamp or optional matching SW-MOTECH top clamp (sold separately). No change of control cables, wiring, or hoses is required for most motorcycles however, the installer should always checking for adequate cable/wiring/hose slack during installation.
Available in anodized silver only; black not available in this model.
In a single 30mm-tall bar riser, the two M8 screws are spaced approximately 38 mm on center.
Kit includes a pair of bar riser blocks and four M8x70mm hexagon socket screws (a.k.a. allen head screws).
- KTM Supercompetition models (i.e., LC4 625 SXC) with 28mm-diameter rigid-mount handlebars.
- For use with original or aftermarket (Magura, Answer Protaper, etc.) 28mm-diameter handlebars.
- KTM LC8 Adventure 950 & 950/S (only for special models with 2-part handlebar holder bridge; most LC8 Adventure 950 models have a single-part casted bridge and need to use bar riser model LEH.00.039.106 instead).
Not for use with 7/8"-diameter handlebars on any motorcycle.
Includes four replacement M8x70mm screws for installation.
Riser Dimensions: 24.5mm wide x 52mm long.
Please follow all Torque Specifications to the letter Failure to do this will void warranty.