Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

Kaoko Throttle Lock Cruise Control for bikes with 14mm ID handlebars (Including KTM 690, 990 and 1190 models)


Limited stock

Only 4 left


Kaoko Cruise Controls are purpose-built for KTM 690, 950, 990 and 1190 models with a 14mm inside diameter handlebar (with or without OEM plastic handguards). It consists of a friction nut that is integral with a replacement handlebar-end weight. The kit also includes a matching left side bar-end weight.

To install, just remove the right hand bar weight, replace it with Kaoko's bar weight, and firmly tighten the central retaining screw.


  • Greatly reduces rider fatigue and strain on hand and wrist
  • While cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set
  • Very simple to operate, even with heavy winter gloves
  • High quality, compact and durable design, super smooth action
  • Takes less than 5 minutes to fit
  • Very little maintenance is required
  • Less wear and tear on throttle cables and linkages
  • Can result in reduced fuel consumption


  • KTM 690 (all models)
  • KTM 950 Adventure
  • KTM 990 SMT
  • KTM 990 Adventure
  • KTM 1190 Adventure
  • KTM 1190 Adventure R

Kit includes a replacement left-side bar end weight.

Kaoko™ Safety Warning: The Kaoko™ Cruise Control is an aftermarket accessory. Any misunderstood, abused or incorrectly installed motorcycle accessory is a safety hazard that could cause injury or death. It’s the rider’s responsibility to understand the operation and purpose for which the Kaoko™ Cruise Control is designed, namely, for cruising, only when safe to do so. At all other times the control should be disengaged. The Kaoko™ Cruise Controls are to be used only by experienced and responsible riders.

USA Patents:
U.S. Pat. No. US D593,462 S
U.S. Pat. No. US D593,463 S
U.S. Pat. No. US D593,464 S

Customer Reviews
Review by kbryan
Does what it should. They should ship with both screws the hex head and the counter sunk head so it could be used with whatever hand guards you have at the moment. I purchased the one with the countersunk head even thou I had the stock guards and just bought a longer hex head screw at local parts shop, but I will have the counter sunk head screw for when I change out of the stock hand guards. My thought was the counter sunk head would be harder to find. (Posted on 1/1/16)
Write Your Own Review

Only registered users can write reviews. Please, log in or register