Includes RAM-HOL-GA12U holder for Garmin Astro 220, GPS 60, GPSMAP 60, 60C, 60CS, 60CSx, & 60Cx.Compatible with all 1" RAM receptacles. Equivalent to SW-MOTECH part TRT.00.475.207.
Can be mounted directly to any Techmount standard top plate, the Techmount Quick Change Adapter, the Bags-Connection GPS/PDA/RAM gadget holder bracket for Quick-Lock Tankbags or any SW-MOTECH GPS holder.
The RAM High Strength Plastic Cradle is designed to hold the following GPS units:
- Garmin GPS 60
- Garmin GPSMAP 60
- Garmin GPSMAP 60C
- Garmin GPSMAP 60CS
- Garmin GPSMAP 60CSX
- Garmin GPSMAP 60CX
All cables can stay connected to the unit while in the RAM cradle.
PLACING YOUR GPS INTO THE CRADLE:
First you need to attach the round belt clip button that is included with the purchase of the GPS unit, to the back of your unit. Next, place the bottom of the GPS into the cradle, and then clip the top of the cradle over the round button (previously attached) on the back of the GPS.
INCLUDED WITH THE CRADLE:
The cradle includes a set of two nuts and bolts (RAM-S-HOL) to connect the cradle to any RAM-compatible mount.
IMPORTANT MOUNTING INFORMATION:
One RAM-B-238 Diamond Base Plate with 1-inch diameter ball mount (sold separately) and is required for attachment of all RAM GPS holders to any RAM mount system.
In addition, you will also need a RAM base with 1"-diameter ball (i.e., RAM-B-202 or RAM-B-231) and at least one RAM-B-201 extension arm.
All RAM components are sold separately.