Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, & 296-series GPSCompatible with all 1" RAM receptacles.
The RAM High Strength Plastic Cradle is designed to hold the following GPS units,
Garmin GPSMAP 176
Garmin GPSMAP 176C
Garmin GPSMAP 196
Garmin GPSMAP 276C
Garmin GPSMAP 296
All cables can stay connected to the unit while in the RAM cradle.
PLACING YOUR GPS INTO THE CRADLE:
Place the knob of the smaller side arm of the RAM cradle into the hole in the back of the GPS. Now slide the larger arm around the edge of the GPS unit until the end of the arm 'clicks' into place at the front edge of the GPS unit.
INCLUDED WITH THE CRADLE:
The cradle includes a set of two nuts and bolts (RAM-S-HOL) to connect the cradle to any of the RAM compatible mounts.
This series of pictures shows the RAM-HOL-GA7 holding a Garmin GPS, connected to a RAM-B-238 Aluminum Diamond Plate with 1'' Ball and RAM-B-201 Aluminum Double 1'' Socket Standard Length Arm
IMPORTANT MOUNTING INFORMATION:
One RAM-B-238 Diamond Base Plate with 1-inch diameter ball mount (sold separately) and is required for attachment of all RAM GPS holders to any RAM mount system.
In addition, you will also need a RAM base with 1"-diameter ball (i.e., RAM-B-202 or RAM-B-231) and at least one RAM-B-201 extension arm.
All RAM components are sold separately.