x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Recently Added Products

Recently Added Products - See What's New!

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 39 total

Page:
  1. 1
  2. 2
  1. NEW
    R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R | 3 Piece

    R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R '17 | 3 Piece

    The R&G engine case cover kit for Suzuki GSX-R1000 & GSX-R1000R '17 | 3 piece provides impact and abrasion protection for the original clutch cover, stator cover and water pump in the event of a fall or slide. Stout polypropylene construction is 4mm thick to reduce the risk of damage in an impact and prevent wear through in a low side. These high quality case covers mount directly over the factory covers without the need to lose a drop of fluid or replace gaskets. Drilling or any other modifications are not necessary as a select few of the same bolt holes are utilized.

    When you consider the replacement cost of original Suzuki engine covers and a new water pump, this 3 piece kit is a very wise investment for any track or street going motorcycle. Without this set a small slide could easily compromise the motor causing oil/coolant loss and even worse, cause debris to enter the motor and require a complete rebuild. Don't leave your GSX-R vulnerable to injuries, keep it safe with a 3 piece case cover kit from the preservation professionals at R&G!

    Learn More
    $256.19

  2. NEW
    R&G Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R '17 | LHS Water Pump

    R&G Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R '17 | LHS Water Pump

    The R&G engine case cover for Suzuki GSX-R1000 & GSX-R1000R '17 | LHS water pump safeguards the vulnerable water pump from damage in the event of a fall or slide. Stout 4mm polypropylene features a low profile design so cornering clearance isn't compromised. This durable case cover is naturally impact absorbing and abrasion resistant so the water pump remains preserved during an incident. Fitment is easy as the factory unit does not need to be removed, therefore no coolant is lost and gaskets remain intact. Invest in proper protection for your GSX-R and install the R&G water pump case cover! Learn More
    $89.66

  3. NEW
    R&G Titanium Oil Cooler Guard for Suzuki GSX-R1000 & GSX-R1000R

    R&G Titanium Oil Cooler Guard for Suzuki GSX-R1000 & GSX-R1000R '17

    The R&G titanium oil cooler guard for Suzuki GSX-R1000 & GSX-R1000R '17 deflects bugs, stones and other debris thrown by the motorcycles own sticky front tire and other traffic. Genuine grade 1 Ti mesh provides twice the strength of comparable aluminum and is surrounded by a seamless aluminum frame. This exotic oil cooler guard is hard anodized for enhanced durability and a long lasting attractive appearance. Air flow is not compromised allowing maximum cooling efficiency and service life as fragile cooling fins are protected from clogging with debris and dents which can restrict air flow and degrade oil cooling efficiency. The risk of punctures and dangerous oil leaks (which could also cause severe engine damage) are significantly reduced by simply fitting this guard. Installation is simple without the need for drilling, cutting or any other modifications. Your GSX-R deserves top notch protection, keep it safe with a titanium oil cooler guard from R&G! Learn More
    $96.06

  4. NEW
    R&G Exhaust Hanger Kit for Suzuki GSX-R1000 & GSX-R1000R

    R&G Exhaust Hanger Kit for Suzuki GSX-R1000 & GSX-R1000R '17

    The R&G exhaust hanger kit for Suzuki GSX-R1000 & GSX-R1000R '17 replaces both passenger foot pegs with a lower profile exhaust hanger on the right and a blanking plate on the left side of the motorcycle. Both pieces are constructed of sturdy aluminum and powder coated for improved durability and corrosion resistance. The lightweight exhaust hanger is made from 6mm thick aluminum for proper support of the end can. Installation takes only minutes and does not require drilling or any other permanent modifications. Give your GSX-R a no-frills race aesthetic with the R&G exhaust hanger kit! Learn More
    $105.03

  5. NEW
    R&G Tail Tidy Fender Eliminator for Suzuki GSX-R1000 & GSX-R1000R

    R&G Tail Tidy Fender Eliminator for Suzuki GSX-R1000 & GSX-R1000R '17

    The R&G tail tidy fender eliminator for Suzuki GSX-R1000 & GSX-R1000R '17 significantly enhances aesthetics by replacing the large OEM rear fender/tag holder with a lower profile unit. Sturdy stainless steel construction ensures proper support for the turn signals and license plate and tucks them tightly below the taillight. This sleek fender eliminator is powder coated black for improved durability and corrosion resistance while perfectly integrating with the factory black under-tail. OEM turn signals can be used or upgrade to the Aero LED indicators (sold separately) for an even slimmer appearance. Installation is straightforward without the need to drill or cut bodywork. Most folks will only see the rear end of your GSX-R 1000, make it look sharp with a tail tidy from R&G! Learn More
    $181.49

  6. NEW
    R&G Lever Guard for Suzuki GSX-R1000 & GSX-R1000R

    R&G Lever Guard for Suzuki GSX-R1000 & GSX-R1000R '17

    The R&G lever guard for Suzuki GSX-R1000 & GSX-R1000R '17 reduces the risk of accidental lever activation from an unintended input that can lead to a dangerous loss of control. Lightweight Dupont Zytel construction is available in black, blue, green, orange and red colors and can be mounted to either left or right side clip on. This versatile lever guard safeguards the brake lever when mounted on the throttle side or the clutch lever when mounted on left side. Without this critical piece of safety equipment, a small bump to the front brakes could lock the front wheel without warning causing a serious "endo" and launch you over the bars. Interference with the clutch lever without this guard is also extremely dangerous as a bump can cause a momentary loss of drive which can also cause a loss of control.

    Highly recommended for use on the track where tight elbow to elbow racing is commonplace but street riders who ride with others or in groups can also benefit. Commuters who regularly filter through traffic can also take advantage of adding a lever guard as a light bump from a side view mirror could easily cause your motorcycle to lose control, especially when in tight quarters. No drilling, cutting or any other permanent modifications are necessary for installation. Properly safeguard your controls with a lever guard from the preservation professionals at R&G!

    Learn More
    $52.51

  7. NEW
    R&G Tail Sliders for MV Agusta F4 & F4 RC | Carbon Fiber

    R&G Tail Sliders for MV Agusta F4 '10-'17 & F4 RC '16-'17 | Carbon Fiber

    The R&G tail sliders for MV Agusta F4 '10-'17 & F4 RC '16-'17 | carbon fiber provide protection against scrapes and scratches of the most vulnerable edges of the OEM bodywork. Organic polymers are shaped to mimic the contours of the factory plastics, woven in a mesmerizing twill weave and finished in a deep, high gloss shine. The amazing strength of the elegant carbon fiber is further enhanced with Dupont Kevlar at the impact face for even greater protection from damage. Great for preserving expensive bodywork on new motorcycles and/or covering up existing scratches to restore the appearance of your plastics. Installation is simple with the use of silicone adhesive (included) and thorough cleaning of the application area to remove any dust, dirt or wax. Preserve the beautiful tail on your Italian supermodel and install a set of carbon fiber tail sliders from the protection professionals at R&G! Learn More
    $95.39

  8. NEW
    R&G Aero Style Frame Sliders for MV Agusta F4 '10-'17

    R&G Aero Style Frame Sliders for MV Agusta F4 '10-'17 | White

    The R&G Aero style frame sliders for MV Agusta F4 '10-'17 | white significantly reduce the risk of damage to critical components in the event of a fall or slide. High Density Polyethylene pucks are naturally impact and abrasion resistant and designed to contact the ground instead of your motorcycle. These essential frame sliders are bolted directly to the frame with de-embrittled hardware which bends at the point of failure (with a severe enough impact) instead of snapping off and leaving the motorcycle unprotected. This kit requires small 28mm holes be drilled in the fairing to allow mounting of the pucks on each side, a bit is available from the drop down menu above if needed.

    These frame sliders are highly recommended for every motorcycle, and are an excellent investment when you consider repair or replacement costs of OEM parts. If you are hesitant to drill your plastics, "No-cut" version is available in the link below. Safeguard your beautiful Italian motorcycle and bolt on a pair of Aero style frame sliders from the preservation professionals at R&G!

    Learn More
    $100.97

  9. NEW
    R&G Aero Style Frame Sliders for MV Agusta F4, F4R & F4RR (Black slider shown)

    R&G Aero Style Frame Sliders for MV Agusta F4, F4R & F4RR '10-'14

    The R&G Aero style frame sliders for MV Agusta F4, F4R & F4RR provide protection to the most critical components in the event of a fall or spill. High Density Polyethylene (HDPE) bobbins are aerodynamically shaped and mounted to the frame with a specially designed bracket that eliminates fairing modifications. HDPE is naturally impact absorbing and abrasion resistant to keep the frame, engine and plastics off the ground minimizing the risk of damage in a slide. De-embrittled hardware is used in the main bolts which allows them to bend and absorb impact forces (reducing the transfer of energy to the frame) and to prevent shearing which could leave your motorcycle unprotected.

    When you consider repair or replacement costs, frame sliders are a very wise investment for any road going motorcycle on the road or the track, especially one as beautiful and expensive as an MV Agusta. Rest assured this kit does not require any permanent modifications and installation is a straightforward bolt-on affair. Properly protect your F4 with a set of Aero style frame sliders from the protection experts at R&G!

    Learn More
    $252.74

  10. NEW
    R&G Rear Foot Rest Blanking Plates for MV Agusta F4 RC

    R&G Rear Foot Rest Blanking Plates for MV Agusta F4 RC '15-'17

    Clean up the unfinished appearance left behind when removing the passenger peg mounts with the R&G rear foot rest blanking plates for MV Agusta F4 RC '15-'17. High quality aluminum is precisely CNC machined for a perfect fit and is hard anodized silver to enhance durability and corrosion resistance. These attractive blanking plates mount directly to the sub-frame in place of the OEM passenger peg mounts and cover up exposed bolt holes for an improved aesthetic that doesn't leave your motorcycle looking as though something is missing. Installation is quick and easy without the need for any permanent modifications. Don't leave your MV Agusta naked, cover your Italian beauty with a set of rear footrest blanking plates from R&G! Learn More
    $76.81

  11. NEW
    SW-MOTECH LEGEND GEAR SLC Side Carrier for Mounting LC1 Side Bag On Triumph Thruxton 1200 | Right Side

    SW-MOTECH LEGEND GEAR SLC Side Carrier for Mounting LC1 Side Bag On Triumph Thruxton 1200 '16 | Right Side

    The SW-MOTECH LEGEND GEAR SLC side carrier for mounting LC1 side bag on Triumph Thruxton 1200 on the right side permits the ability to add stylish luggage that compliments the classic appearance of your motorcycle. High strength tubular steel is powder coated black for an attractive finish that is also durable and corrosion resistant. This German engineered side carrier uses a quick lock mounting system to accommodate the LEGEND GEAR LC1 side bag with the ability to remove or re-install in seconds. The rack itself bolts-on to factory mounting points on the subframe and does not require any modifications for fitment. Install this SLC side carrier on your Thruxton and enjoy the luxury of heading out for adventure with room for supplies!

    Learn More
    $76.95

  12. SALE
    GIVI UT808 25 Liter Waterproof Side Bags

    GIVI UT808 25 Liter Waterproof Side Bags

    The GIVI UT808 25 liter waterproof side bags provide 50 liters of total storage capacity that you can count on to stay dry no matter the weather, road or lack of road encountered. High-tenacity Polyester construction ensures rugged durability with a protective rip-stop lining and a dual layer system to keep contents safe. Hypalon inserts create a semi-rigid structure so these versatile side bags won't flap around when empty, even at speed. Mounting to PL and PLX series racks is easy and the universal straps will also allow you to secure the luggage to most other side racks without any need for modifications. Load up the GIVI UT808 25 liter waterproof side bags and ride in confidence knowing your stuff will be dry when you reach your destination! Learn More
    $299.00 $269.10

  13. NEW
    SW-MOTECH Legend Gear SLC Side Carrier Set for Suzuki SV650

    SW-MOTECH Legend Gear SLC Side Carrier Set for Suzuki SV650 '17

    The SW-MOTECH Legend Gear side carrier set for Suzuki SV650 '17 mounts to OEM fixing points for fitment of Legend Gear LC1 or LC2 side bags on the left and an LC1 side bag on the right side of the tail. Hearty tubular steel construction serves as an excellent foundation for adding luggage and is powder coated for a factory original appearance that is also easier to clean. These sturdy side carriers allow speedy mounting and un-mounting of Legend Gear side bags with a quick release mechanism on the bags for increasing total luggage capacity from 19.6 liters with dual LC1 side bags or 23.3 liters with a LC2 on the left and a LC1 on the right side. The larger LC2 bag can be fitted to the left but only the smaller LC1 is recommended for adequate exhaust clearance.

    Installation of the SLC side carriers does not require any permanent modifications like drilling or cutting as original mounting points are reused. This kit is designed and engineered in Germany with superior craftsmanship and dependable performance for miles of trouble free use. Enhance the luggage carrying capacity of your SV650 with classic great looks by adding Legend Gear side bags and the SLC side carrier set from SW-MOTECH!

    Learn More
    $163.90

  14. NEW
    SW-MOTECH Legend Gear SLC Side Carrier Set for Ducati Monster 821 '14-'17 & Monster 1200 /S
    $163.90

  15. NEW
    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Fat Bob

    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Fat Bob '08-'17

    The SW-MOTECH Legend Gear SLC side carrier set for Harley Davidson Fat Bob '08-'17 provides a secure foundation for the addition of dual LC1 side bags on the tail of your motorcycle. Robust tubular steel construction is powder coated for a factory original appearance with enhanced durability. This convenient side carrier set makes it possible to quickly add a Legend Gear LC1 bag to the left & right side of the tail with a handy quick release mechanism built into the bags. Simply add both bags for 19.6 liters of total storage capacity. The LC1 side bag mounts and un-mounts using a quick release mechanism built into the bag. Drilling, cutting, welding or any other permanent modifications are not required for installation. Keep pounding the pavement only with more of the things you need while on the road and install the SLC side carrier set and a pair of Legend Gear side bags!

    Learn More
    $163.90

  16. NEW
    SW-MOTECH Blaze Sport Saddlebag System for Kawasaki ZX10R

    SW-MOTECH Blaze Sport Saddlebag System for Kawasaki ZX10R '16-'17

    Add versatility to your motorcycle with the SW-MOTECH Blaze Sport saddlebag system. With two stainless steel support arms that remove with the snap of a button and a drape over design, you can go from grocery shopping on your way home from work to riding without luggage in a matter of minutes. Designed specifically for the Kawasaki ZX10R, the rugged construction and aerodynamic styling of the SW-MOTECH Blaze Sport saddlebag system will keep your bike looking great while hauling your essentials. Learn More
    $408.95

  17. NEW
    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Fat Boy, Breakout & CVO Pro Street Breakout (right side, left side not shown)

    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Fat Boy '07-'17, Breakout '13-'17 & CVO Pro Street Breakout '16-'17

    The SW-MOTECH Legend Gear SLC side carrier set for Harley Davidson Fat Boy '07-'17, Breakout '13-'17 & CVO Pro Street Breakout '16-'17 adds the ability to carry LC1 & LC2 soft luggage on the tail of your motorcycle. Attractive powder coated tubular steel provides secure support and utilizes the factory mounting points on the rear fender. This high quality side carrier set is designed and engineered in Germany for a perfect fit and seamless integration with the factory original components. 

    Total storage capacity can be 19.6 liters with two LC1 bags, or 23.3 liters with a larger LC2 bag on the left side (the LC1 is the only recommended bag on the right due to exhaust size). The side carriers allow the bags to be mounted and un-mounted in a swift fashion using a quick release mechanism built into the side bags. Luggage is not included in this kit unless added from the drop down menu above. Improve the versatility of your Harley Davidson with the addition of the Legend Gear side bags and this SLC side carrier from the luggage experts at SW-MOTECH! 

    Learn More
    $163.90

  18. NEW
    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Street Bob, Wide Glide & Dyna Low Rider

    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Street Bob & Wide Glide '09-'17 & Dyna Low Rider '16-'17

    The SW-MOTECH Legend Gear side carrier set for Harley Davidson Street Bob & Wide Glide '09-'17 & Dyna Low Rider '16-'17 mounts to OEM fixing points for fitment of Legend Gear LC1 or LC2 side bags on the left and an LC1 side bag on the right side of the tail. Robust tubular steel construction serves as an excellent foundation for adding luggage and is powder coated for a factory appearance and easier cleaning. These superb side carriers allow speedy mounting and un-mounting of Legend Gear side bags with a quick release mechanism on the bags to add total luggage capacity from 19.6 liters with dual LC1 side bags or 23.3 liters with a LC2 on the left and a LC1 on the right side. The larger LC2 bag can be used on the left but only the smaller LC1 can fit on the exhaust side.

    Installation of the side carriers does not require drilling, cutting, welding, concrete mixing or any other permanent modifications as the factory fender mounts are utilized. This kit is designed and engineered in Germany with superior fit, finish and functionality. Enhance luggage capacity and style on your Harley Davidson with Legend Gear side bags and the SLC side carrier set from SW-MOTECH!

    Learn More
    $163.90

  19. NEW
    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Softail Blackline & Softail Slim

    SW-MOTECH Legend Gear SLC Side Carrier Set for Harley Davidson Softail Blackline '11-'13 & Softail Slim '12-'17

    The SW-MOTECH Legend Gear side carrier set for Harley Davidson Softail Blackline '11-'13 & Softail Slim '12-'17 bolts to factory mounting locations for fitment of Legend Gear LC1 or LC2 side bags on the left and right side of the motorcycle. Sturdy tubular steel construction serves as a reliable foundation for adding luggage and is powder coated for an attractive appearance with enhanced durability. These premium side carriers allow swift and simple mounting of Legend Gear side bags utilizing a quick release mechanism on the bags to add total luggage capacity from 19.6 liters with the LC1 side bags and 27 liters with the LC2 side bags.

    The larger LC2 bag can be used on both sides of the motorcycle or for more exhaust pipe room simply use the smaller LC1 bag on the right side. Installation of the side carriers does not require permanent modifications as the factory fender mounts are utilized. This kit is designed and engineered in Germany with superior build quality and a precision fit. Add the Legend Gear side carrier set and LC1 or LC2 side bags for classic style and improved versatility on your Harley Davidson!

    Learn More
    $163.90

  20. SALE
    GIVI RP1110 Skid Plate for Honda VFR1200X

    GIVI RP Series Skid Plate for Honda VFR1200X '16-'17 | Aluminum

    The GIVI RP Series skid plate for Honda VFR1200X '16-'17 | aluminum provides protection for the leading lower edge and undercarriage of the motorcycle from strikes and debris impacts. Lightweight alloy construction is 3mm thick and fully reinforced with riveted seams. This attractive skid plate is laser cut for a precise fit that integrates perfectly with the original factory components and features vents that promote airflow to keep the engine cool. Two different versions are available (for DCT or Non-DCT transmissions) so make sure you select the correct option from the drop down menu above. Installation is straightforward and does not require any permanent modifications. Prepare your VFR for any adventure and install a RP Series skid plate from GIVI! Learn More
    $250.00 $225.00

  21. NEW
    KLIM Teton Knife shown in stealth matte black

    KLIM Teton Knife and Sheath

    The KLIM Teton Knife is the tool you didn't know that you wanted. Designed for adventurers and those that aspire to adventure, this drop point blade is constructed of 1095 High Carbon Differentially Heat treated for a sharp edge and flexible spine. With this hand crafted beauty by your side, you'll have a knife worthy of exclaiming "You call that a knife? THIS is a knife!" Learn More
    $199.99

  22. NEW
    KLIM Back Country Knife shown in stealth matte black

    KLIM Back Country Knife and Sheath

    Get prepared for your next motorcycle adventure with a KLIM Back Country knife. Small enough for cleaning fish, field dressing your fresh game kill, or to give you something to fall back on while trying to survive on the road in a Mad Max style post apocalyptic motorcycle race. Constructed of 1095 High Carbon Differentially Heat treated steel for a sharp edge and flexible spine, don't be caught without the KLIM Back Country Knife. Learn More
    $119.99

  23. R&G Flyer for Kawasaki Z650 '17

    R&G Flyer for Kawasaki Z650 '17

    Download R&G's flyer for the Kawasaki Z650 here. See everything R&G has to offer for the Z650!

    Learn More
    $0.00

  24. Continental TKC80, Dual Sport, 170/60-17, Bias Ply, 40% Street / 60% Dirt, 72Q, Tubeless Rear Tire

    Continental TKC80, Dual Sport, 170/60-17, Bias Ply, 40% Street / 60% Dirt, 72Q, Tubeless Rear Tire

    The Continental TKC80, dual sport, 170/60-17, bias ply, 40% street / 60% dirt, 72Q, tubeless rear tire is an aggressive off road performance tire that improves stability, drive and overall traction in soft, loose terrain. Thanks to the self-cleaning design, large tread blocks bite into the earth to power through tough conditions without clogging up. This menacing dual sport tire also delivers civilized pavement characteristics with an intimidating aesthetic that looks great on any motorcycle. Designed and engineered in Germany and chosen as original equipment by several elite motorcycle manufacturers. Install the TKC80 from Continental and discover how far your adventures will take you! Learn More
    $183.45

  25. Klim Intake Men's Vest

    Klim Intake Men's Vest

    The Klim Intake Men's vest is a lightweight insulated performance mid layer that also doubles as a stylish casual vest. Durable Ripstop nylon is utilized for the shell while the interior is lined with premium embossed Taffeta. 80 Grams of Siliconized 3M Thinsulate insulation makes this attractive vest superbly comfortable and very compactable. The entire garment is able to compress so that it fits in the right hand pocket for storage. Stay comfortable and warm on the trail or while looking great downtown in an Intake vest from Klim! Learn More
    $139.99

  26. R&G Radiator Guard for KTM 690 Duke IV in black

    R&G Radiator Guard for KTM 690 Duke IV '12-'15

    The R&G radiator guard for KTM 690 Duke IV provides critical protection against damage from bugs, stones and other debris that could compromise the performance and integrity of the most vulnerable component in your cooling system. Strong yet lightweight aluminum mesh is surrounded by a seamless frame and finished in a powder coating that also increases durability and corrosion resistance. This essential radiator guard protects fragile cooling fins from getting clogged with insects or debris that could reduce the cooling efficiency and possibly even cause a puncture. If your motorcycle looses antifreeze (coolant) without you noticing, the engine could over heat and cause serious damage. Don't get stuck miles from home with a punctured radiator and an expensive repair bill; install an R&G radiator guard on your KTM 690 Duke IV! Learn More
    $78.13

  27. TechSpec Gripster Universal Demo Grip Strips | (2) 2in x 8in strips

    TechSpec Gripster Universal Demo Grip Strips | (2) 2in x 8in strips

    Use TechSpec Gripster Universal Demo Grip Strips anywhere your body contacts your motorcycle and you'd like a solid grip. Adhered to the side of or center of the tank, these strips would function as tank grips and allow for added control when braking and cornering. They can be cut into any shape you desire. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.

    Learn More
    $24.95

  28. TechSpec Gripster Universal Track Day Tank Grip kit

    TechSpec Gripster Universal Track Day Tank Grips | 2 piece kit

    Get any motorcycle ready for track day with TechSpec's Universal Track Day Tank Grip Kit. This kit includes left and right pre-cut tank grips to adhere to the side of your tank, ensuring that you'll maintain position through the most aggressive cornering and braking. Learn More
    $29.95

  29. R&G Fender Extender for Moto Guzzi V7 Cafe Classic

    R&G Fender Extender for Moto Guzzi V7 Cafe Classic

    Provide protection for your motorcycle from road debris and dirt with the R&G Fender Extender. Constructed from durable ABS plastic, this guard is designed to block stones, mud, grime and water kicked up by the front tire, adding protection to your engine, cooling system, exhaust and fairings. Easy to install, this kit fits directly to your motorcycle’s front fender using push rivets and adhesive strips. Available in "carbon look" or black finish and specifically designed to match your motorcycle’s existing lines, the R&G fender extender offers tailored protection that looks great. Learn More
    $34.68

  30. R&G Fender Extender for Honda PC800

    R&G Fender Extender for Honda PC800

    Provide protection for your motorcycle from road debris and dirt with the R&G Fender Extender. Constructed from durable ABS plastic, this guard is designed to block stones, mud, grime and water kicked up by the front tire, adding protection to your engine, cooling system, exhaust and fairings. Easy to install, this kit fits directly to your motorcycle’s front fender using push rivets and adhesive strips. Available in "carbon look" or black finish and specifically designed to match your motorcycle’s existing lines, the R&G fender extender offers tailored protection that looks great. Learn More
    $34.68

  31. R&G Fender Extender for Honda VTX1800 '01-'08

    R&G Fender Extender for Honda VTX1800 '01-'08

    Protect your motorcycle from road debris and dirt with the R&G Fender Extender. Crafted from durable ABS plastic, this guard is designed to block stones, grit, mud and water kicked up by the front wheel, adding protection to your cooling system, engine case, exhaust pipes and fairing panels. Simple to install, this kit mates directly to your motorcycle’s front fender or mud shield using adhesive strips and push rivets. Available in black or “carbon look” finish and designed using 3D scanning technologies to match your motorcycle’s existing lines, the fender extender by R&G offers tailored protection that looks great. Learn More
    $34.68

  32. TechSpec Gripster Set for Yamaha YZF R1 | 5 piece kit

    TechSpec Gripster Set for Yamaha YZF R1 '16-'17 | 5 piece kit

    Get the TechSpec Gripster Tank Grips for your Yamaha YZF R1 and you'll experience solid tank grip without any gear snagging.

    Stop slipping during hard braking, acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and stay in place via a super sticky paint friendly adhesive that is pre-applied to the backs of the pads. These handy Gripster tank grips will increase long distance comfort and reduce fatigue by allowing the lower body to provide more support, relieving pressure on hands, wrists, arms and shoulders.

    To install, simply clean your tank and peel off the backing on the grips and stick them to your tank. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.

    Learn More
    $94.95

  33. TechSpec Gripster Set for Kawasaki ZX10R Ninja | 5 piece kit

    TechSpec Gripster Set for Kawasaki ZX10R Ninja '16-'17 | 5 piece kit

    Get the TechSpec Gripster Tank Grips for your Kawasaki ZX10R Ninja and you'll experience solid tank grip without any gear snagging.

    Stop slipping during hard braking, acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and stay in place via a super sticky paint friendly adhesive that is pre-applied to the backs of the pads. These handy Gripster tank grips will increase long distance comfort and reduce fatigue by allowing the lower body to provide more support, relieving pressure on hands, wrists, arms and shoulders.

    To install, simply clean your tank and peel off the backing on the grips and stick them to your tank. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.

    Learn More
    $84.95

  34. R&G Tank Traction Grips for Kawasaki Ninja 650& ER-6n shown in black

    R&G Tank Traction Grips for Kawasaki Ninja 650 '12-'16 & ER-6n '12-'16

    If you find yourself lacking confidence in the corners or wanting more control over your bike, R&G Tank Traction Grips are the answer. The unique texture allows you to comfortably grip the sides of your tank with your knees and—this is the important part—stay there.

    No more sliding on the tank means that you can maintain the ideal body position when braking and cornering. No more distractions while you constantly adjust your body—it's just you and the road.

    Additionally, the traction grips preserve the finish of your motorcycle, protecting it from everyday wear and tear. But let's get realistic, it's all about the ride.

    Maximize your riding potential on your Kawasaki Ninja 650 or ER-6n with tank traction grips from R&G!

    Learn More
    $38.40

  35. TechSpec Gripster Tank Grips Set for BMW R1200R shown with snake skin material

    TechSpec Gripster Tank Grips Set for BMW R1200RS '15-'17 | 3 Piece Kit

    Get solid tank grip without snagging with TechSpec Gripster Tank Grips for your BMW R1200RS.

    Stop slipping during hard braking, acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and stay in place via a super sticky paint friendly adhesive that is pre-applied to the backs of the pads. These handy Gripster tank grips will increase long distance comfort and reduce fatigue by allowing the lower body to provide more support, relieving pressure on hands, wrists, arms and shoulders.

    To install, simply clean your tank and peel off the backing on the grips and stick them to your tank. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.

    Learn More
    $74.95

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 39 total

Page:
  1. 1
  2. 2