x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Recently Added Products

Recently Added Products - See What's New!

FILTER OPTIONS

Grid List

per page

24 Item(s)

  1. NEW
    Sold as singles only - R&G Self Adhesive License Plate Reflector | 4cm

    R&G Self Adhesive License Plate Single Reflector | 4cm

    Increase your ability to be seen at night with the R&G self adhesive license plate reflector. With a 4cm (1.57in) diameter, you can mount this just about anywhere you want to catch the attention of a wandering mind. Keep the odds in your favor by installing a license plate reflector by R&G on your motorcycle before your next night ride. Learn More
    $2.95

  2. SW-MOTECH Biker Scarf | Microfiber Neck Tube

    SW-MOTECH Biker Scarf | Microfiber Neck Tube

    The SW-MOTECH biker scarf microfiber neck tube is great for protecting your exposed skin from wind, sunburn, bugs and dusty road debris. Soft and stretchy 100% Polyester keeps you comfortable on a motorcycle or out on the town. This elegant scarf is a staff favorite in the colder months when you can stay cozy by tucking one end up into the neck-roll of your helmet, and the other inside of your jacket collar. Sophisticated good looks are a natural side effect that may be experienced with a garment of this caliber. Whatever you do, order one of these microfiber neck tubes from SW-MOTECH and you can thank us later! Learn More
    $6.95

  3. R&G Clutch & Brake Reservoir Cover

    R&G Clutch & Brake Reservoir Cover | Orange

    The R&G clutch and brake reservoir cover is fabricated out of orange elasticized terry cloth with a black R&G logo stylishly stitched in. This protector fits on just about any motorcycle on the market. The cover shrouds your brake or clutch reservoir preserving heat and absorbing any leaked fluids, keeping them away from tires and hand controls. To install, just slide the covering over your motorcycles clutch or brake reservoir. Ride away protected with R&G.

    Learn More
    $7.95

  4. Scottoiler Dispenser Adapter For Eccentric Adjuster Models (CAM)

    Scottoiler Dispenser Adapter For Eccentric Adjuster Models (CAM)

    The Scottoiler dispenser adapter for eccentric adjuster models will securely attach the dispensing component to your motorcycles swing arm so it can reliably feed oil to the rear sprocket. This kit is specially designed for motorbikes with an eccentric cam chain adjustment or has rear spindles larger than 20mm and no other means of attaching the dispenser plate. The underside of the swingarm must have a flat surface to ensure a proper install. It is recommended that when you are switching the Scottoiler vSystem or eSystem to another motorcycle with an eccentric adjuster, you should purchase another SA-0176BL.

    Learn More
    $8.95

  5. Scottoiler Self Adhesive Cable Clips | Pair

    Scottoiler Self Adhesive Cable Clips | Pair

    The Scottoiler self-adhesive cable clips enable the quick and easy routing of the system tubing to your motorcycle. To use, simply clean the area you're going to stick the clip to with an alcohol wipe, remove the backing and apply. The Scottoiler cables or tube will then snap into the clip. Grab these handy clips as extras to ensure easy installation or when moving your vSystem or eSystem to another motorcycle.

    Learn More
    $4.95

  6. Scottoiler Vacuum Tubing | Black - 2m

    Scottoiler Vacuum Tubing | Black Nylon - 2m

    The Scottoiler vacuum tubing is manufactured using a high-quality fuel resistant nylon to ensure safety. This material can easily be cut with a sharp knife to get the required length (smaller sections make replacement injector nibs). The tubing is used in the installation process of a Scottoiler vSystem to make the connection between the reservoir and your motorcycle's engine vacuum.

    For easy attachment, apply a small amount of oil on the SC-0051BL. If the tubing on your automatic chain oiler happens to get damaged or you are moving the system to another motorcycle, grab some new Scottoiler vacuum tubing.

    Learn More
    $7.95

  7. Scottoiler Delivery Tubing | Clear PVC - 3m

    Scottoiler Delivery Tubing | Clear PVC - 3m

    Use this Scottoiler delivery tubing when extending or changing the existing dispenser route or moving your automatic chain oiler to another motorcycle. The tube is manufactured using clear PVC, so you can see the Scottoil inside. This tubing conveys the oil to the injector unit and withstands road and trail conditions. Learn More
    $9.95

  8. Scottoiler Dual Lock - 2 Pieces

    Scottoiler Dual Lock - 2 Pieces

    The Scottoiler Dual Lock velcro has excellent adhesion properties and provides a secure hold for the eSystem display unit. To install, simply peel off the backing and stick one pad to the electronic component and the other to a flat surface on your motorcycle. Attach the electronic display unit to the corresponding velcro piece and you're ready to go.

    Dual Lock is often used by motorbike manufacturers to secure fairing panels. This industrial grade velcro is super strong. If you are changing motorcycles it is recommended that you get new Dual Lock pieces to establish a strong connection.

    Learn More
    $9.95

  9. Scottoiler eSystem Check Valve Assembly

    Scottoiler eSystem Check Valve Assembly

    The Scottoiler eSystem check valve assembly will keep the oil from moving down along the feed tube when your motorcycle is not moving. This lets the oiling system to operate only while you're riding. Without this necessary component, your electronic automatic chain oiler will be siphoned out of oil thanks to atmospheric pressure.

    When installing a Scottoiler system check valve assembly please ensure that it is oriented correctly. There is an arrow marked on the valve to make this easy.

    Here's a little tip. To speed up priming the system, remove the check valve assembly and connect the feed tube directly to the reservoir.

    Learn More
    $18.95 $9.45

  10. Scottoiler M5 Brass Screw-In Spigot

    Scottoiler M5 Brass Screw-In Spigot

    This Scottoiler M5 brass screw-in spigot provides an auxiliary vacuum outlet to connect and operate the vSystem automatic chain oiler. To install this component use a small amount of sealant to achieve an airtight seal. This spigot taps into your motorcycle's engine vacuum where an M5 threaded hole exists.

    Are you transferring your Scottoiler vSystem from one motorcycle to another? If you are it is recommended that you purchase this replacement M5 brass screw-in spigot.

    Learn More
    $4.95

  11. Scottoiler Stainless Steel Dispenser Plate Clip

    Scottoiler Stainless Steel Dispenser Plate Clip

    The Scottoiler stainless steel dispenser plate clip is a replacement part manufactured to keep your vSystem in tip top shape. This corrosion resistant and sturdy piece is a very important component of the automatic chain oiler system. The clip is designed to hold the injector nib securely to the dispenser plate so it makes contact with the face of the sprocket, ensuring proper lubrication. When the dispenser plate clip needs to be replaced after riding through many kinds of harsh environments or you are changing motorcycles, be sure to get this genuine Scottoiler replacement. Learn More
    $4.95

  12. Scottoiler Dispenser Plate (Small) | 10mm

    Scottoiler Dispenser Plate (Small) | 10mm

    This Scottoiler dispenser plate (small) 10mm is a replacement piece. The part is designed to securely hold the injector nib so it touches the face of the sprocket. This little component operates in some harsh environmental conditions. If the dispenser plate gets damaged, replace it with a genuine Scottoiler part.

    Learn More
    $4.95

  13. Scottoiler Tee Connector, Natural Nylon | 4mm

    Scottoiler Tee Connector, Natural Nylon | 4mm

    Easily re-connect your Scottoiler vSystem to your motorcycles vacuum with the Scottoiler tee connector. This replacement piece is manufactured out of natural nylon and is specifically made for motorbikes with 4mm vacuum piping. Simply cut the vacuum pipes and insert the tee piece and then attach the shorter 3rd arm to the Scottoiler unit. This piece is included with the Scottoiler standard universal vSystem. Learn More
    $3.95

  14. :  Scottoiler Filler Plug With Female Luer

    Scottoiler Filler Plug With Female Luer

    The Scottoiler filler plug with female luer provides a seal against the elements and a connection for priming the system. This piece sits inside the filling hole in the oil reservoir recess. The filler plug with female luer allows the RMV to breathe. This replacement piece connects to either the breather assembly in normal use, the lube tube, touring kit or the filling spout on the oil during priming of the system. To refill your reservoir remove the oil filler plug.

    The flexible rubber plug can harden over time (10+ years) and it is recommended that you replace it with a genuine Scottoiler filler plug with female luer, especially if you are changing the vSystem from one motorcycle to another.

    Learn More
    $6.95

  15. Scottoiler European Adaptor

    Scottoiler European Adapter Kit for Euro Spec BMW F650GS Twin '08-'12, F700GS '13-'16 & F800GS '08-'16

    The Scottoiler European Adapter Kit is required to complete the installation of the vSystem automatic chain oiler on European versions of the BMW F650GS & F800GS Twin & F700GS. The airbox connections are slightly different than those of motorcycles built for the U.S and this component ensures proper fitment without the need for modifications. If you plan to install the Scottoiler vSystem on your European BMW, pick up one of these adapters and make the installation a no brainer!

    Learn More
    $9.95

  16. Scottoiler Breather Assembly With Male Luer

    Scottoiler Breather Assembly With Male Luer

    The Scottoiler breather assembly with male luer attaches to the oil reservoir. This piece is crafted using a clear PVC tube with a black plastic luer (spigot) on one end and a breather filter on the other.

    The breather assembly has a male luer which connects into the filler plug, allowing the system to breathe. As the oil in the reservoir level goes down, air is drawn in to replace it. Scottoiler includes a filter to prevent dirt and dust particles from getting into your vSystem or eSystem.

    Learn More
    $8.95

  17. Scottoiler Tee Connector For Select Aprilia, Kawasaki, KTM & Suzuki Motorcycles | 6mm

    Scottoiler Tee Connector For Select Aprilia, Kawasaki, KTM & Suzuki Motorcycle Models | 6mm

    This Scottoiler tee connector is manufactured to re-connect the vacuum piping (6mm inner diameter) during the installation of your Scottoiler vSystem. The smaller end then connects to the vacuum damper that is attached to the vacuum tube from the reservoir. Grab one to keep in your toolbox as a spare. Learn More
    $5.95

  18. Scottoiler Tee Connector For Select Aprilia & Triumph Motorcycles | 8mm

    Scottoiler Tee Connector For Select Aprilia & Triumph Motorcycle Models | 8mm

    Discover how easily the Scottoiler Tee connector attaches your 8mm internal diameter pipes to the Scottoiler vSystem. To install, simply cut your vacuum pipe and insert the tee piece to re-connect the two pieces. The shorter leg then connects to the vacuum damper attached to the vacuum tube from the reservoir. This tee connector is a replacement piece for the one that originally came with your Scottoiler vSystem. Learn More
    $5.95

  19. Scottoiler M6 Brass Screw-In Spigot

    Scottoiler M6 Brass Screw-In Spigot

    The Scottoiler M6 Brass Screw-In Spigot provides a vacuum port to connect and operate the vSystem chain oiler on motorcycles without an original vacuum connection. Use this spigot to tap into the engine vacuum on motorcycles where an M6 threaded hole exists. To install, simply screw this piece into the vacuum hole and use a small amount of sealant to achieve an airtight seal. The vacuum connection is now made and you’re ready to go.

    If you are moving your vSystem from one motorcycle to another, it is recommended that you purchase another Scottoiler M6 brass screw-in spigot.

    Learn More
    $4.95

  20. Scottoiler Vacuum Damper Assembly (With Filter) For Select Kawasaki, Triumph & Yamaha Motorcycles | 6mm

    Scottoiler Vacuum Damper Assembly (With Filter) For Select Kawasaki, Triumph & Yamaha Motorcycle Models | 6mm

    This replacement part is made for the Scottoiler vacuum operated vSystem. This elbow shaped piece connects your Scottoiler vacuum tubing to the engine vacuum and comes with a filter that stabilizes the vacuum and keeps the system clean. By damping the vacuum pulses the Scottoiler systems will not be affected by subtle pressure fluctuations. This Scottoiler vacuum damper assembly can be combined with a vacuum take-off point lager than the standard 4mm diameter. Learn More
    $5.95

  21. Scottoiler Vacuum Damper Assembly (With Filter)

    Scottoiler Vacuum Damper Assembly (With Filter)

    The Scottoiler vacuum damper assembly (with filter) is made for the vSystem. This elbow shaped piece of plastic will fit onto the engine, manifold, EVAP, throttle body or carb vacuum take off (location is motorcycle model dependant). The assembly comes complete with a filter that will help stabilize the vacuum and keep the system clean. By damping the vacuum pulses the Scottoiler vSystem will not be affected by subtle pressure fluctuations. This component comes in handy when you are moving the automatic chain oiling system from one motorcycle to another. For hassle free installation, apply a small amount of oil on the SA-0100BL.

    The vacuum damper assembly is made of flexible plastic. Over time (like 10+ years) it can harden. If you are moving the kit from one motorbike bike to another, we recommend you replace this part. This component is crucial to get an airtight seal on the engine.

    Learn More
    $4.95

  22. Scottoiler Universal Spigot Assembly For Select BMW, Honda, Husqvarna, MZ & Suzuki Motorcycles

    Scottoiler Universal Spigot Assembly For Select BMW, Honda, Husqvarna, MZ & Suzuki Motorcycle Models

    The Scottoiler universal spigot assembly is an auxiliary vacuum port for installation on motorcycles without an original vacuum connection which makes use of the vSystem automatic chain oiler possible. Without a factory vacuum connection the only other option would be to install the eSystem electronic chain oiler that is significantly more expensive. This handy universal spigot makes it possible (with modification) to use the vSystem on any motorcycle regardless of a factory equipped vacuum port! Professional installation is recommended but not required and it's a more affordable option when trying to fit an automatic chain oiler. Add the universal spigot assembly to your Scottoiler vSystem installation and ride off into the sunset perfectly lubricated!

    Learn More
    $9.95

  23. Scottoiler Dispenser Adapter Kit For Select Kawasaki Motorcycles

    Scottoiler Dispenser Adapter Kit For Select Kawasaki Motorcycle Models

    The Scottoiler dispenser adapter kit will provide you with a neat and tidy setup for your Scottoiler unit on your Kawasaki motorcycle. Included in this kit are all the pieces necessary to install the dispenser. This is a replacement kit and contains the same pieces that came with your Scottoiler vSystem. Learn More
    $8.95 $5.41

  24. Scottoiler Injection Tubes - Pair

    Scottoiler Injection Tubes - Pair

    This pair of replacement Scottoiler injector tubes will replace old, worn or broken ones. The Scottoiler tubes are designed as a failsafe for the unit by easily breaking off if snagged on either the chain or sprocket. These tubes will work with both of the Scottoiler vSystems or eSystems. Grab a set of Scottoiler replacement injector tubes to bring your dispenser back to full working order. Learn More
    $5.95 $4.45

FILTER OPTIONS

Grid List

per page

24 Item(s)