x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Recently Added Products

Recently Added Products - See What's New!

FILTER OPTIONS

Grid List

per page

10 Item(s)

  1. SALE
    GIVI M7 Monokey Plate

    GIVI M7 Monokey Plate

    The GIVI M7 Monokey Plate provides secure mounting for any of the Monokey series top cases onto any of the FZ or SR series top racks. This rugged nylon plate features a durable center luggage rack that provides support for strapping soft luggage and smaller items to the rack when not using a top case. Learn More
    $66.00 $59.40

  2. NEW
    R&G Passenger Foot Rest Blanking Plates for Triumph Tiger 1050 Sport '16-'17

    R&G Passenger Foot Rest Blanking Plates for Triumph Tiger 1050 Sport '16-'17

    The R&G Foot Rest Blanking Plates for the Triumph Tiger Sprint 1050 '16-'17 are designed to clean up the space left behind after removal of your passenger foot pegs. Finished in black with a white R&G logo to close and tidy up the exposed holes when removing the pillion pegs. If you won't be riding with a passenger and wish to remove your passenger pegs then these R&G Foot Rest Blanking Plates are a must have for both tidying up the look and protecting the exposed parts left behind.

    Learn More
    $56.98

  3. SALE
    GIVI AL6407A Fitting Kit For 100AL Windscreen For Triumph Street Twin

    GIVI AL6407A Fitting Kit For 100AL & 100ALB Windscreens For Triumph Street Twin '16

    The GIVI AL6407A fitting kit is required to install the GIVI 100AL or 100ALB windscreen on your Triumph Street Twin. This mounting system includes everything that you need to securely support the windshield on your motorbike. A few simple hand tools are all that you will need to attach the GIVI AL6407A fitting kit. Learn More
    $65.00 $58.50

  4. NEW
    R&G Kickstand Shoe For BMW R1200RT '14-'16

    R&G Kickstand Shoe For BMW R1200RT '14-'17

    With the R&G Kickstand Shoe for your 2014-2017 BMW R1200RT, you can prevent the sinking and toppling of your bike by enlarging the footprint of your side stand by up to 100%. No need to worry about carrying around a spare puck ever again!

    Despite this enlargement, the shoe does not affect ground clearance or interfere with the chain run during normal riding. The R&G Kickstand shoe bolts onto the bottom of the side stand helping to prevent penetrating or "poking" into soft ground.

    Available for nearly 100 different bikes, including mainstream adventure, sport, naked and touring machines, each shoe installs super quickly with three countersunk allen bolts and binds the existing stand foot with an aluminum bottom level to prevent corrosion and is topped with a stainless steel lid for strength.

    The R&G Kickstand Shoe significantly spreads the load applied by your motorcycle to help prevent the side stand from sinking into hot asphalt, sand and other soft surfaces. 

    Learn More
    $50.79

  5. NEW
    Klim Glove Liner 4.0

    Klim Glove Liner 4.0 Insulated

    The Klim Glove Liner 4.0 Insulated has been designed for ultimate cold weather riding with all the features to turn an ordinary riding glove into an insulated glove. Combining 80 grams of 3M™ THINSULATE™ platinum insulation with a leather palm for superior slip resistance, this glove is sure to elevate any glove to the next teir of cold weather protection. Use the Klim Glove Liner 4.0 Insulated for ideal protection from the elements, recommended use with any Klim Gore-Tex riding glove.

    Learn More
    $54.99

  6. Dynaplug Micro Pro Inflator - (what's in the box)

    Dynaplug Micro Pro Inflator

    The Dynaplug Micro Pro Inflator is the world's smallest precision inflation kit designed for use with smaller vehicles where size and weight are paramount. A convenient ballistic nylon carrying case holds all the components you may need to add air to a tire after a repair or before hitting the highway. This versatile inflator features convenience items like a zero loss screw on Schrader valve connection, LED work light, and an auxiliary air pressure valve for real-time pressure monitoring with the included pencil type gauge while inflating. Supplying power to the unit can be accomplished using any of the 3 available SAE cords; the alligator clips for an on the spot battery connection, a ring terminal SAE cord or a 12V cigarette plug. A SAE to SAE extension is also included for added convenience. The entire kit in the carrying case weighs less than 1.5 lbs! Add a Dynaplug Micro Pro Inflator to your motorcycles trunk or luggage and be prepared for your next ride! Learn More
    $59.99

  7. R&G Rear Axle Sliders for Yamaha WR450F '12-'15

    R&G Rear Axle Sliders for Yamaha WR450F '12-'15

    The R&G rear axle sliders for the Yamaha WR450F '12-'15 provide impact and abrasion protection in the event of a tip over, fall or slide. High Density Polyethylene keeps vulnerable hard parts from hitting the pavement and getting rashed up. These critical sliders actually help to slow a sliding motorcycle without allowing the axle, brakes, chain or sprocket to dig into the road and cause a flip or cartwheel. Installation is very simple and does not require any modifications. Invest in proper protection for your WR450F and add a set of rear axle sliders from R&G! Learn More
    $50.44

  8. SW-MOTECH On-Road/Off-Road Convertible Foot Peg Kit for Triumph Tiger Explorer 1200

    SW-MOTECH On-Road/Off-Road Convertible Foot Peg Kit for Triumph Tiger Explorer XCx & XCa '16-'17 & Tiger Explorer XR, XRx & XRt '16-'17

    The SW-MOTECH on-road/off-road foot peg kit for Triumph Tiger Explorer XCx & XCa '16-'17 & Tiger Explorer XR, XRx & XRt '16-'17 directly replaces the original equipment to enhance traction, stability and comfort no matter the weather or terrain. An increased surface area transfers weight over a larger part of your boots which significantly reduces pressure points, numbness and fatigue on longer rides. These all purpose foot pegs can be used with the rubber insert for excellent grip in the dry with some vibration absorption for even greater touring comfort. As soon as conditions get slippery simply unbolt the rubber insert to expose the aggressive stainless steel tread for ferocious traction in wet & muddy conditions.

    For even greater comfort, these foot pegs can be lowered 15 mm from the factory height to offer additional leg room. Installation is simple with no drilling, cutting or other modifications necessary, simply bolt on in place of the factory equipment and you're ready to roll. Install the SW-MOTECH on-road/off-road foot peg kit on your Explorer and enjoy the ride!

    Learn More
    $146.90

  9. R&G Oil Cooler Guard for Ducati Multistrada 1200, 1200S & 1200 Enduro

    R&G Oil Cooler Guard for Select Ducati Multistrada 1200 Models | Black

    Prevent trip ending and expensive damage by protecting the vulnerable lubrication system on your Ducati Multistrada 1200, 1200S and 1200 Enduro with an R&G oil cooler guard. Easy to install with no permanent modifications required, this two piece, pressed aluminum shield set is designed specifically to mount inside your motorcycle’s nose cowling. Keep your adventures rolling by installing an oil cooler guard by R&G before your next motorcycle ride. Learn More
    $58.22

  10. R&G Bar End Sliders for Ducati Monster 1200R

    R&G Bar End Sliders for Ducati Monster 1200R '16-'17

    The R&G bar end sliders for Ducati Monster 1200R provide protection for the handlebar to minimize damage in the event of a tip over or slide. High Density Polyethylene is impact absorbing and abrasion resistant to allow the handlebar to slide with the motorcycle instead of digging in and bending or breaking and possibly causing additional damage to the frame. These handy bar end sliders are easy to install and do not require any modifications for fitment. Simply unbolt your factory unit on each side and bolt these on in the same fashion. Invest in proper protection for your Ducati with these bar end sliders from R&G! Learn More
    $50.79

FILTER OPTIONS

Grid List

per page

10 Item(s)