Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

MRA X-creen Sport Add-On Variable Windscreen Spoiler Blade (bolt-on and clamp-on hardware included)

Rating
30 Review(s)
$119.95
SKU: MRA.XCA.S

In stock


OR
 
Customer Reviews

Items 1 to 10 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3
Review by bobmor
Rating
Easily installed on 2012 Honda CBF 600 and definitely makes positive difference. (Posted on 8/18/15)
Review by danham
Rating
After about 150 miles of testing on my BMW F800 ST at speeds from 40 to 80, I'm very happy with my new spoiler.

The clamp-on version appears to be solid -- even when the whole rig (stock screen and MRA) was flapping around a bit in truck wake on the slab, the MRA never loosened up or moved out of position. This was a big relief because the tiny allen set screws which hold the clamps on the windshield seem like they never get fully tight -- my guess is you need to be careful not to tighten them so much that they crack the screen, so the big question was: are they tight enough even though I could definitely turn them farther? The answer appears to be yes. Be sure to watch the TT installation videos -- it's not a hard job, but it's complicated.

With the caution that I never really had buffeting issues with the stock screen other than what I thought was unavoidable truck wake, I find that the MRA really changes the whole feel of the bike on the highway when other vehicles are nearby. It got the torture test when I got stuck behind two vehicles: a van carrying a big ladder on its roof, followed by an SUV, going about 70 in the left lane. This often produces maximum turbulence and obviously the MRA can't make that stop. But instead of getting a sort of "bobble-head" effect where my helmet gets tossed around a bit, any such wobbly buffeting seemed to be restricted to my shoulders and of course the screen and MRA themselves, which moved around a fair amount.

This promises to reduce highway fatigue a lot and I already notice that doing head checks for lane changes is much easier, with hardly any wind pressure on the side of my helmet with my head turned. As near as I can tell, the wind stream has moved a bit, with some pressure still on my shoulders (which I like, to keep my wrists happy), but less on my head. I never bothered to re-adjust for back roads; it is totally out of the way. But I definitely think the Sport model is the best for F800 bikes; the Tour model might get in the way and be too big.

The big test will be driving rain, but I'm not in a hurry to do that [g]. To me the big plus of the MRA is that it is very adjustable, so it stands a better chance than any replacement screen of matching your height, width, helmet, jacket and riding position, all of which influence wind flow and buffeting. (Posted on 8/16/15)
Review by Scot
Rating
I have been using the Xcreen Add-on for the last several hundred miles on my Kawasaki Versys 650 LT. It adds a level of air deflection that can do a multitude of things. You can use it to direct airflow to stop buffeting. You can also raise it to the highest setting to create a nice pocket of dead air so that you may ride with your visor open. Some things to note: The clamps are made out of metal. The weight of the unit does cause some flopping around at lower speeds. Once up to highway speeds, the wind load on the OEM screen stops most of that. It's easily transferable from bike to bike though. On sport bikes with more rigid mounted windscreens it works great. (Posted on 7/24/15)
Review by HyperPete
Rating
I use this on my VStream Touring Windshield on my M109R. It works well, but had someone replied to my request for info before the sale, I probably would have ended up getting the wider / taller model. Still, it "fixes" the VStream and makes it useable on the highway. I think it is overpriced, but it does what I needed, and I have not found any other options. (Posted on 7/17/15)
Review by Alejandro
Rating
I´m from Argentina and I boght this X-Creen a month ago, I instaled it on my V Strom 650/20014 and the results are amazing. The wind protección is excellent and the hardware have a high quality and presicion,. Especial thanks for Twisted Throttle !! (Posted on 6/19/15)
Review by Ted
Rating
Not cheap. Glad I got it. Well made. Put it on a National F-16, oversized fly screen really. Tremendous difference at interstate speed. Had to brace the F-16 that normally only fastens at bottom because of the increase in pressure it causes at top of screen at higher speed. Buy it. You won't be disappointed. (Posted on 6/17/15)
Review by Wes
Rating
Easy to install and works great. Eliminated 100 percent of the buffeting I was experiencing. Wind now goes over my head and not in my face. (Posted on 6/5/15)
Review by Roscoe
Rating
I used the clamp-on kit that came with the spoiler blade. After attaching it to my Zero Gravity Sport Tour windshield I noticed less buffeting from wind blast from pick-up trucks and tractor-trailers. It also raised the direct wind flow from my chin of my helmet to just above my eyebrows. It will get the real test come Labor Day and 1800 miles of the Pacific California/Oregon coastline. (Posted on 6/2/15)
Review by Caponord02
Rating
This thing works awesome!!! It shipped very quickly and I had it mounted in about 20 minutes one ride and adjustment later and it's perfect. (Posted on 4/14/15)
Review by Ron
Rating
I just installed the clamp-on on my new F3 Spyder. The OEM Blue Ridge winshield was too low, and the wind was beating me to death. The MRA X-Creen directs the air flow up over my head and makes a big difference! Great bang for the buck! (Posted on 4/13/15)

Items 1 to 10 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3
Write Your Own Review

Only registered users can write reviews. Please, log in or register