Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

SW-MOTECH Handlebar riser barbacks & top clamps for most BMW, Ducati, Gas-Gas, Honda, Kawasaki, KTM LC4, MZ, Suzuki, Triumph & Yamaha - pair, 31mm rise & 22mm pullback

Rating
10 Review(s)
$103.95
SKU: LEH.00.039.152

In stock


OR
 
Customer Reviews

10 Item(s)

per page
Review by ken
Rating
i picked these up for my bike and yes ,they made a world of difference .they are easy to install with 'some' cable manipulation, I moved the hand controls in about a 1/4" on both sides, there is still a bit of tightness on one of the electrical cables at a full turn but the bars still lock and under normal riding conditions I don't see an issue. yes they're a hundred bucks but....worth it ! now if I can only find a 500 mile seat. ha!! (Posted on 6/10/15)
Review by Dave
Rating
I just traded my 08 VStrom (DL 1000) on the 2015 model. I pretty much had my farkling done but was looking for a solution to get the handlebars up and back. The 2015 is different in that the front brake setup goes from hose at the reservoir to a steel union at the fender affording very little slack to add bar back/risers. The clutch is about the same....in terms of very little little extra room to work. Webbikeworld.com found these bar backs that worked without having to change any hoses/cables. There is a very nice write up about this part on their site. I installed these and they worked perfectly.....I just removed the keepers under the fairing for a bit more slack. This was a huge deal......saved a whole lot of work. The part is high quality....SW Motech.....as expected. I hope this part gets listed specifically for the V2. (Posted on 6/10/15)
Review by Belrix
Rating
I installed these Barbacks on my 2012 Honda NC700X and they moved the handlebars up and back to provide a very comfortable ride!

I did have to re-position the front brake line hose a little to provide enough slack, not a big deal at all. (Posted on 5/14/15)
Review by AtomicWoodworker
Rating
Bought this riser/barback set to alleviate forward pressure on my hands at the grips of my VStrom 1000. Works exactly as advertised. Allows to ride more upright and even helps me stand up more comfortably. Great product for the price.

The only thing to watch out for are the RHS brake and throttle cables. Once installed, there is virtually no slack left in either one. Recommend loosening or repositioning a few of the cable brackets to give you more room to maneuver. (Posted on 5/7/15)
Review by Superfunkomatic
Rating
The product was just as advertised. Came in the mail quickly. (Posted on 4/29/15)
Review by Rocketman2300
Rating
Well made and great fit. Came with all the hardware and easy instructions. (Posted on 3/28/15)
Review by kuyohtay
Rating
Unfortunately, I entered my 2009 Ducati MTS 1100S and these came up. They don't fit the large diameter tapered bars. Also, for the money, quality is just below average. If they fit, they would be functional, but the powder coating was thick and drippy. The castings are average. Should have been machined and anodized (black was my choice) Would not recommend unless you have no other choice. (Posted on 3/3/15)
Review by Anonymous
Rating
They're priced awfully high, but their construction seems very good. These did exactly what they're supposed to do - rise the bar and move it back. Unfortunately it seems that I didn't need either. I would love to return them but in my stupidity I lost a plastic cap to one of the bolts and now am stuck with a $96 hunk of aluminum. So make sure you actually need a riser/barback before you order. (Posted on 7/7/14)
Review by Scottness
Rating
Great bar risers. The color matches well to the bike and it does exactly what it says it should… That said, the pressure on my hands wasn't effected enough and I've had to order something different to get the weight off my hands. If you are 5'6" or taller and are looking to alleviate pressure from your hands, this product isn't for you. Otherwise, it's awesome. (Posted on 7/7/14)
Review by Robert
Rating
They're priced awfully high, but their construction seems very good. These did exactly what they're supposed to do - rise the bar and move it back. Unfortunately it seems that I didn't need either. I would love to return them but in my stupidity I lost a plastic cap to one of the bolts and now am stuck with a $96 hunk of aluminum. So make sure you actually need a riser/barback before you order. (Posted on 8/17/13)

10 Item(s)

per page
Write Your Own Review

Only registered users can write reviews. Please, log in or register