Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

Denali D2 Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount

Rating
16 Review(s)
$359.99
SKU: TT-D2

In stock

Only 9 left


OR
 
Customer Reviews

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2
Review by Ronzo
Rating
The Hawk light mount bracket set is very nice. All of the harness plugs end up in the perfect spots for a sano installation. Connected for dual intensity. The blue 100% intensity wire can not be connected to the high beam bulb wire because the high intensity will flicker badly. Use the high beam wire to power a simple 2 circuit, 4 prong relay and use the red/black 15 power wire ( power with key on) to power the blue D2 harness wire via the relay. This isolates the power form the head lamp high beam bulb which gets its power from the electrical system control module. Also connect the white D2 harness wire to the red/black terminal 15 power wire ahead of the relay. This all can be done and fits behind the head lamp. Twisted Throttle did not seem to know what to do. This installation is for a 2014 KTM 1190 ADVENTURE. These lamps are very bright ! Bad news is all body work and tank must be removed. Good news is no flicker no more. The reliability remains to be determined. (Posted on 3/17/15)
Review by Hgans
Rating
Like the lights. Only complaint is that the hookup wiring is not strait forward and requires some willingness and ability to DIY. (Posted on 12/31/14)
Review by KrisOG
Rating
The Triumph Tiger 1050 is notorious for having terrible lights. This kit improved the low beam visibility and seriously increased visibilty on the high beam setting. It would probably be better if I use the narrow beam filter instead of the wide beam, but most of my riding is on two-lane country roads so I need to see to the sides. Installation was a bit difficult despite being 90% plug and play, but I think that has to do with the Tiger's sealed headlight and lack of secure places for the ballast. I also noticed some sporadic flickering, so I'm not sure what that is all about. (Posted on 12/24/14)
Review by Kermit
Rating
While riding in the UP of Michigan, I was pulled over by one of Michigan's finest. As I watched him in my rearview mirror walk up to me, he looked pretty intimidating. The first thing out of his mouth was, "What kind of lights are those?" I told him about my Denali 2's and said "You could see me coming, couldn't you?" Turns out he was a rider also, and we talked about bikes for awhile, exchanged cards and he let me off with a warning. I think the lights paid for themselves that day! (Posted on 11/15/14)
Review by bravo616
Rating
Much better than some other popular brands and way cheaper. The D2 is perfect for my BMW K1600GT. I used these in place of the poor factory aux lights. Ive had them for over two years and they still Impress. I can see off to the sides and down the road. For the great price and quality, what's not to like? I was also able to use the factory switch for a super clean install. (Posted on 10/22/14)
Review by hifikenny
Rating
I installed my D2s a few weeks ago and absolutely love them (Posted on 10/1/14)
Review by Msquared
Rating
Install is relatively simple. I did not remove the gas tank but 'fished' the lines behind the tank panels and behind and underneath the tank itself. Wiring diagram is easy to understand and the photos on the website under tutorials were very helpful in seeing how Twisted Throttle crews installed the D2's on their own company bike. I used the Best Rest light bar which is a solid, simple install and keeps the D2's tight to the frame so that if you are riding off-road and dump your bike, there will be very little probability of damaging the lights or light bar. (Posted on 9/24/14)
Review by TA49
Rating
I have equipped 3 bikes with these lights, two BMWs and a Honda. They add to my visibility, both day and night, and the installation is straight forward and foolproof.

The compact size gives more mounting options than a bigger light. (Posted on 9/1/14)
Review by Dfreeair
Rating
Bought a set of D2's for my 2012 vstrom 650. Worked as advertised. Wired them to the high/low headlight switch. On low they make for extra visibility during daytime running and at night on high beam unbelievable how they light up the sides of the road as well as how far down the road they illuminate. Easy to install, good instructions. Definitely buy the Denali Power Hub 2. Cleans up everything nice. Also if you have a new vstrom 650 I would buy the SW-Mototech brackets. High quality, fit perfect, and march the lines on the bike. (Posted on 8/1/14)
Review by GaryS
Rating
They work as they are supposed to work and look great. Unscientific, but it seems cars pull out much less often with these lights on. And only on low beam. (Posted on 7/31/14)

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2
Write Your Own Review

Only registered users can write reviews. Please, log in or register