Moves bars up & back diagonally approximately 2" to unload weight from wrists & forearms and relax the neck. Fits all 1-1/8" diameter handlebars, but is especially designed for use on BMW F800GT, R1200GS '04-'12, R1200GS Adventure, KTM 690 Enduro, 950 Adventure, 990 Adventure, 1190 Adventure & Triumph Tiger 800 XC & Explorer 1200 & Explorer 1200 XC '12-'16
Rox Handlebar Risers for 28mm (1-1/8in) Bars including:
R1200GS Adventure '06-'13
KTM 690 Enduro
Triumph Tiger 800 XC
Explorer 1200 XC '12-'16
Ducati Multistrada 1200 (All Models) '10-'16Installation hardware is supplied. Top clamps use 4 M8 x 25mm bolts.
These risers are:
Dual rotation points makes our riser selectively adjustable forward and back, allowing you to fit your handlebars to your preferred riding position. Our risers allow you to raise your stock bars or use a motocross style bar.
With its two piece design, our risers will install on virtually any Mini/Off Road Bike that has clamps to hold the handlebars, making it incredibly universal.
---Engineered and tested for maxinum strength and durability:
CNC machined from billet 6061 T6 aluminum
Caution: First determine if you have adequate cable length before installing handlebar risers. Amount of extra cable length varies based on make and model. It is recommended that you consult your local dealer. After installation, check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
- Review by Greg
Fit & finish is superb
Installed on an 1190 Adventure, with 23mm triple-clamp to bars spacers already, they bring the bars up 73mm nearly 3" and allow for exact possisionig of the bars. BTW, no need for longer controls cables.
Bending the brake line slightly, next to lever, then repositioning brake line on frame, just in front of fuel tank, works perfectly. (Posted on 4/25/2016)
- Review by Bajarob
- Review by Randy
The only beef I would have, though minor, is that I thought the supplied hardware would have been stainless. Though there's quality in its required strength I thought for the cost it would have been stainless. Otherwise a very good product with excellent fit and finish. (Posted on 4/22/2016)
- Review by KPed
- Review by squirrel
- Review by Paul
- Review by Jimbo
- Review by jpw3
- Review by Anonymous