F650CS Scarver '02-'06

What makes the DrySpec D38 better than other waterproof motorcycle dry bags on the market?

Unlike other dry bags, the D38 features a rigid structure, which means that the bag functions more like a topcase than a traditional dry bag. You can mount the D38 onto any motorcycle whether it has a rear rack or not. The D38 can be mounted even when the bag is completely empty. Try that with a traditional dry bag.

Learn More

Why is the D28 better than other waterproof motorcycle dry bags on the market?

Unlike other dry bags, the D28 features a Dual-End roll top design that allows access to contents without detaching the bag from the motorcycle. Select which end you want to open and then simply release the two clips that secure the rolled end. Unroll the bag and reach in to get what you need. Either end is accessible. No need to loosen the mounting straps. Just unclip, unroll, grab, reroll, secure the clips, and go.

Learn More

The PowerHub fuse block allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, workmanlike manner. Includes six 10-amp fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle. Learn More

DrySpec™ D66 Waterproof Motorcycle Dry Bag Modular Packing System by Twisted Throttle combines the D38 and D28 dry bags together for 66 liters of waterproof storage.
Save $20.00 when you purchase the D28 and D38 together as the D66 Dry bag System!
Learn More

For 7/8"-diameter handlebars with 4.75" to 4.9"-long open-ended original grips (the most common grip size for sportbikes, enduros, and scooters). NEW 'Sport' grip style! Learn More

For 7/8"-diameter handlebars with 4.75" to 4.9"-long open-ended original grips (the most common grip size for sportbikes, enduros, and scooters). Learn More

Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More

These footpeg clamps allow you to attach MFW Footpegs to crashbars with a diameter from 0.85" (21mm) to 1.125" (28mm), including all SW-MOTECH and Givi crashbars. Sold in pairs. Learn More

The Daypack is a small 5-7 liter tankbag. This is an ideal tankbag for a ride around town or a short ride in the country. Learn More