x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
F650GS & F650GS Dakar, '04-'07

F650GS & F650GS Dakar, '04-'07

F650GS & F650GS Dakar, '04-'07

FILTER OPTIONS

Grid List

per page

Items 71 to 90 of 90 total

Page:
  1. 1
  2. 2
  3. 3
  1. Scottoiler TMX 365 Off-Road Protector 1 Liter Spray

    Scottoiler TMX 365 Off-Road Protector 1 Liter Spray

    If you're taking your motorcycle into the dirt then don’t forget to apply the Scottoiler TMX 365 off-road protector spray. The formula is made up of a blend of mineral oil, surfactant, anti-corrosion additives and water. When TMX 365 is sprayed onto your motorbike, the water evaporates leaving the shielding agents behind. This off-road spray protects your bike from the corrosion and oxidation and makes it easier to clean. The TMX 365 is biodegradable and after repeated use will build up a protective coating keeping your motorcycle looking like you just rode it off the showroom floor. Learn More
    $15.00

  2. Scottoiler Universal Spigot Assembly For Select BMW, Honda, Husqvarna, MZ & Suzuki Motorcycles

    Scottoiler Universal Spigot Assembly For Select BMW, Honda, Husqvarna, MZ & Suzuki Motorcycle Models

    The Scottoiler universal spigot assembly is an auxiliary vacuum port for installation on motorcycles without an original vacuum connection which makes use of the vSystem automatic chain oiler possible. Without a factory vacuum connection the only other option would be to install the eSystem electronic chain oiler that is significantly more expensive. This handy universal spigot makes it possible (with modification) to use the vSystem on any motorcycle regardless of a factory equipped vacuum port! Professional installation is recommended but not required and it's a more affordable option when trying to fit an automatic chain oiler. Add the universal spigot assembly to your Scottoiler vSystem installation and ride off into the sunset perfectly lubricated!

    Learn More
    $9.95

  3. HEX Code EU4 Adapter Cable for GS-911wifi to fit EU4 Compliant J1962 (OBD-11) Diagnostic Connectors

    HEX Code EU4 Adapter Cable for GS-911wifi to fit EU4 Compliant OBD Diagnostic Connectors

    Allow your 10 pin diagnostic connector outfitted GS-911wifi to connect to the new generation of EU4 compliant J1962 (OBD II) diagnostic connection equipped motorcycles with the HEX Code EU4 Adapter Cable. Beginning in 2017, all motorcycles will be required to meet EU4 standards which includes the use of OBD II diagnostic connectors. Perfect for enthusiasts who plan to own or service motorcycles spanning these years, this handy plug will allow your HEX Code diagnostic tool with 10 pin connectors to be compatible with the newer models as well. Diagnose pre and post 2017 motorcycles easily with the EU4 adapter cable for the GS-911wifi by HEX Code. Learn More
    $30.00

  4. Continental ContiTrailAttack 2, Dual-Sport, Front 19 inch, Size 100/90-19, 90% Street / 10% Dirt, 57H, Tubeless Bias Ply Tire

    Continental ContiTrailAttack 2, Dual-Sport, Front 19 inch, Size 100/90-19, 90% Street / 10% Dirt, 57H, Tubeless Bias Ply Tire

    With an innovative touring-compound that provides excellent grip and mileage, the Continental ContiTrailAttack 2 delivers maximum high speed stability during arduous, fully loaded adventure touring. Learn More
    $98.95

  5. SW-MOTECH Drybag 260 Waterproof Tail Bag | 26L

    SW-MOTECH Drybag 260 Waterproof Tail Bag | 26L

    Keep your extra gear dry with the SW-MOTECH Drybag 260 waterproof tail bag. With a four point mounting system, this dry bag will secure easily to your luggage rack or another bag to expand your carrying capacity. The roll top closure and a rugged PVC coating ensures your gear will be completely waterproof even if submerged. Take more along on your next motorcycle adventure with a Drybag 260 by SW-MOTECH. Learn More
    $73.95

  6. DENALI SoundBomb Compact Dual-Tone Motorcycle Air Horn Kit | Horn & Wiring Harness

    DENALI SoundBomb Compact Dual-Tone Motorcycle Air Horn Kit | Horn & Wiring Harness

    Replace the original horn on your motorcycle with the attention grabbing DENALI SoundBomb Compact Dual-Tone Air Horn Kit. As the name implies, the SoundBomb emits a loud blast that is nearly impossible to ignore by even the most distracted motorists and with 120 decibels of sound output measured at 3 feet, the SoundBomb is 4 times louder than a standard motorcycle horn. Designed specifically for motorcycles, this horn is vibration and weather proof and is finished in black to blend in with your machine. Complete with a rugged wiring harness that includes an inline 30amp fuse and relay socket, this kit is plug and play for all motorcycles that have blade style horn wiring connections and includes extra connections for those that do not. Avoid being a statistic by alerting others with the SoundBomb Compact Dual-Tone Air Horn Kit by DENALI.  Learn More
    $76.98

  7. SW-MOTECH Handlebar Riser Kit to fit 22mm Handlebars for many Aprilia, BMW, Honda, Kawasaki, Suzuki, Triumph & Yamaha models | 30mm Rise - Black

    SW-MOTECH Handlebar Riser Kit to fit 22mm Handlebars for many Aprilia, BMW, Honda, Kawasaki, Suzuki, Triumph & Yamaha models | 30mm Rise - Black

    Adjust your riding position for more comfort and control with the SW-MOTECH Handlebar Riser Kit to fit 22mm Handlebars for many Aprilia, BMW, Honda, Kawasaki, Suzuki, Triumph and Yamaha models. By raising the handlebars by 30mm, the rider is allowed to assume a more natural and relaxed riding position which will lead to safer riding by reducing fatigue and improving body dynamics. Simple to install, these aluminum risers are attractively designed and have a black powder coated finish that will look great for years of motoring adventures. Whether you are looking for more comfort on longer trips or more control during technical riding, enhance your motorcycling experience and ride to your potential with a Handlebar Riser Kit by SW-MOTECH. Learn More
    $68.95

  8. SW-MOTECH Handlebar Riser Kit to fit 22mm Handlebars for many Aprilia, BMW, Honda, Kawasaki, Suzuki, Triumph & Yamaha models | 25mm Rise - Silver

    SW-MOTECH Handlebar Riser Kit to fit 22mm Handlebars for many Aprilia, BMW, Honda, Kawasaki, KTM, Suzuki, Triumph & Yamaha models | 25mm Rise - Silver

    Adjust your riding position for more comfort and control with the SW-MOTECH Handlebar Riser Kit to fit 22mm Handlebars for many Aprilia, BMW, Honda, Kawasaki, KTM, Suzuki, Triumph and Yamaha models. By raising the handlebars by 25mm, the rider is allowed to assume a more natural and relaxed riding position which will lead to safer riding by reducing fatigue and improving body dynamics. Simple to install, these aluminum risers are attractively designed and have a silver powder coated finish that will look great for years of motoring adventures. Whether you are looking for more comfort on longer trips or more control during technical riding, enhance your motorcycling experience and ride to your potential with a Handlebar Riser Kit by SW-MOTECH. Learn More
    $68.95

  9. R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Black

    R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Black

    The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. Learn More
    $63.95

  10. R&G Waterproof Motorcycle Cover for Adventure Bikes

    R&G Waterproof Motorcycle Cover for Adventure Bikes

    Designed to fit larger adventure and dual-sport bikes with or without sidecases and topcases. Waterproof outdoor protection with anti-theft features and paint protection built in. Learn More
    $76.95

  11. Motion Pro Tri-Drive Mini T-Handle Kit 1/4in drive with 8mm, 10mm, 12mm & 13mm Sockets

    Motion Pro 08-0389 Tri-Drive Mini T-Handle Kit 1/4in drive with 8mm, 10mm, 12mm & 13mm Sockets

    Keep your motorcycle tool kit small but functional with the Motion Pro Tri-Drive Mini T-Handle Kit 1/4in drive with 8mm, 10mm, 12mm & 13mm Sockets. Unlike ratchets that can get jammed up with dirt and crud, this T-drive has no moving parts and will continue to offer flawless service through thick and thin. Easy to stow with a shaft length of six inches, the included eight, ten, twelve and thirteen millimeter quarter inch drive sockets will handle most of your trail or road side removal and replacing needs. The three square drives located on each end of the T-handle as well as the shaft will fit any of your existing quarter inch drive sockets and enables the use of one of the handle drives when extra torque is needed or the shaft drive when spinning speed is preferred. Make a little spot in your kit for the Tri-Drive Mini T-Handle Kit by Motion Pro and keep your adventure rolling. Learn More
    $14.99

  12. Motion Pro Enduro Pro Tire Iron Set

    Motion Pro 08-0051 Enduro Pro Tire Iron Set

    Whether you are riding the ISDE or just looking for tire levers that you can easily pack on your motorcycle or toolkit, the Motion Pro Tire Iron Set will get the job done. Constructed of hot-forged chrome-vanadium, this lever set comes in it’s own vinyl carry pouch, weighs only four and a half ounces, and measures eight and a half inches long. A curved spoon end as well as flat pry end on each bar provide the right amount of bite and leverage needed to mount or remove the toughest tires. Designed for professional off road racers, the Enduro Pro Tire Iron Set by Motion Pro is a lightweight and easy to stow option for any motorcycle. Learn More
    $18.99

  13. HEX Code GS-911 Hammerhead Extension Cable | 1 m

    HEX Code GS-911 Hammerhead Extension Cable | 1 m

    This HEX Code GS-911 Hammerhead Extension Cable allows the user to connect the diagnostic port with this cable to promote easier access for plugging into the GS-911. The 1 m lead includes a male connector on one end that connects directly to your bike and a female connector for plugging into the code reader. This extension cable is useful if your port is difficult to access or when collecting real time data while riding your bike. Learn More
    $65.00

  14. R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Black

    R&G Waterproof Motorcycle Cover For Supersport & Naked Bikes | Silver

    The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures, plus it makes your bike look like a space man. Learn More
    $63.95

  15. Rotopax DLX Pack Mount

    RotopaX DLX Pack Mount

    The RotopaX DLX Pack Mount allows easier tightening and loosening with a dual T handle design that enhances convenience when adding or removing containers. Hardened anodized aluminum construction provides ample strength to carry your water, fuel and cargo. If you didn't guess the DLX stands for "Deluxe" as this mount is superior to the basic mount as it is more user friendly and recommended if you plan to remove your packs regularly. Install onto any flat surface with the provided hardware and bracket or add an optional mounting plate like the L-Bracket or Universal mounting plate. Be prepared for every adventure with a DLX Pack Mount and some essential supplies! Learn More
    $39.95

  16. RotopaX Pack Mount Extension For 3 Gallon Packs

    RotopaX Pack Mount Extension For 3 Gallon Containers

    Mount stacked fuel or water packs to an existing pack mount with a RotopaX Pack Mount Extension for 3 Gallon Containers. Threads into your existing RotopaX Pack mount to provide the added length needed to securely mount the second pack. Double your auxiliary fuel storage or increase the amount of spare water you can carry with Pack Mount Extension for 3 Gallon Containers by Rotopax. Learn More
    $29.95

  17. SALE
    Rox Handlebar Risers For 22mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles shown in aluminum

    Rox Handlebar Risers For 22mm Bars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles | 2in rise

    Rox Handlebar Risers for 22mm Bars on select BMW, Honda, Kawasaki, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. These ergonomic adjusters are designed specifically for standard 22mm handlebars and feature dual rotation points that allow you to pivot them up and back diagonally approximately 2in to relieve the pressure that can build up on your wrists, forearms, and neck. Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. Not only do they improve your riding position and comfort level, these barbacks look stylish on your machine.

    Learn More
    $89.00 $80.10

  18. SALE
    Rox Handlebar Risers For 22mm or 28mm Handlebars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles shown in machined aluminum

    Rox Handlebar Risers For 22mm or 28mm Handlebars On Select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles with 22mm OE Handlebar | 2in Offset

    If your wrists, forearms or neck feel strained and fatigued while riding, you need Rox Handlebar Risers for 22mm or 28mm handlebars. The displacement offered by these risers will relieve the pressure and fatigue that occurs when your handlebar position isn't correct. Removing this pressure means less pain and longer rides, and don't we all want to ride longer?

    These adjustable risers pivot in two locations: where they clamp on to your handlebars, and where your bike clamps on to the risers. You get 2 inches of displacement that you can customize to your exact needs. Not only do they pivot, they're compatible with both 22mm (7/8in) and 28mm (1 1/8in) handlebars. You now have the choice of keeping a standard handlebar or swapping to a fatbar. The combination of an aftermarket handlebar and pivoting risers allows for potentially infinite combinations and will get you riding in the most comfortable position possible.

    Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability. These barbacks look great and are available in anodized black or machined aluminum finishes, ensuring that your ride remains beautiful—and doesn't your motorcycle deserve that?

    These Rox risers will mount on essentially any motorcycle that has a handlebar that measures 7/8in at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

    Learn More
    $97.00 $87.30

  19. SW-MOTECH 20mm Handlebar Risers For 22mm Handlebars

    SW-MOTECH 20mm Handlebar Risers For Select Aprilia, BMW, Honda, Kawaski, KTM, Suzuki, Triumph & Yamaha With 22mm Handlebars

    SW-MOTECH has raised the bars (literally) with these new (7/8 in) 20mm handlebar risers for your motorcycle with 22mm handlebars, increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability.

    No need to replace your handlebars. Simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the top clamp using the included hardware. For use with the original top clamp or included matching SW-MOTECH top clamp.

    Learn More
    $68.95

  20. SW-MOTECH 50mm Handlebar Risers For Select Aprilia, BMW, Honda, Kawaski, KTM, Suzuki, Triumph & Yamaha With 22mm Handlebars

    SW-MOTECH 50mm Handlebar Risers For Select Aprilia, BMW, Honda, Kawaski, KTM, Suzuki, Triumph & Yamaha With 22mm Handlebars

    SW-MOTECH has raised the bars (literally) with these new (2 in) 50 mm handlebar risers for your motorcycle with 22mm handlebars, increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability.

    No need to replace your handlebars. Simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the top clamp using the included hardware. For use with the original top clamp or included matching SW-MOTECH top clamp.

    Learn More
    $68.95

FILTER OPTIONS

Grid List

per page

Items 71 to 90 of 90 total

Page:
  1. 1
  2. 2
  3. 3
Chat with us!