ST2, ST4 & ST3 '97-'07

Built-in accelerometer helps reduce the risk of rear-end collisions

The AdMore Lighting high output premium LED light bar with running, brake, progressive turn signals, and Smart Brake technology is an essential piece of safety equipment on your motorcycle. With the programmable accelerometer, this new light bar is one of the most advanced motorcycle safety accessories on the market. It's also some of the cheapest insurance you can buy.

*Photo animation illustrates brake and turn signal functions only. During deceleration, the center strip of white LED lights also flash to alert oncoming drivers.

AdMore has upped the ante with this Smart Brake technology. Significantly reduce the risk of a rear-end collision with a sophisticated accelerometer that activates brake lights with no input other than rapid deceleration via throttle release or downshifting. Command attention with 81 retina burning LED's that feature progressive amber turn signals. The brake light ignites with a flashing strobe upon initial application to capture the awareness of drivers behind you with a consistent strobe of white LED's that are sure to be seen. The unit also works with the hazard (4-way flasher) lights of your motorcycle by activating both progressive turn signals to increase roadside visibility.

This LED light bar is pre-configured with the most popular settings and options and is primed to go out of the box. If you like to tinker, and tweak, the AdMore light bar allows you to customize its pre-set status. Simply connect it to any computer using the included Micro-USB cable, and the AdMore Configurator Software Suite helps you modify the brightness level, deceleration sensitivity, brake light modulation, white strobe light, license plate light and more!

The AdMore premium light bar is easy to install using the strong universal black powder coated aluminum mounting bracket. All hardware and premium connectors are included in the kit.

Learn More

Yuasa has been powering motorcycles in the USA since 1979 and supplies more Original Equipment Batteries to manufacturers than any other brand. Learn More

SW-MOTECH Bags-Connection QUICK-LOCK Type 110 EVO Tank Bag Bottom Ring is used in conjunction with SW-MOTECH Bags-Connection Quick-Lock EVO tank bags. Learn More

The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. Learn More

Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More

R&G Micro LED Turn Signals (pair). Designed to fit the R&G line of "Tail Tidy" fender eliminators. Learn More

The SW-MOTECH Bags-Connection Non-Electric QUICK-LOCK EVO Micro Tank Bag is designed to store your smaller items at a mere 2.5-5 liters. This small item storage bag fits most bikes and is an excellent around town bag. Compatible with the SW-MOTECH Bags-Connection EVO QUICK-LOCK tank rings, see the app chart below to determine which tank ring is appropriate for your bike.

Learn More

Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349U threaded ball base fits many motorcycles including the Victory Vision. Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Learn More

Adjustable cradle for mounting larger cellphones or video iPods. This kit may be mounted directly to any RAM-B-238 mounting base, as well as any Techmount, Bags-Connection, SW-MOTECH GPS holder. Cradle Clamping Dimensions: Height Range: 4.75" - 6.25" Width Range: 2.25" - 3.25" Learn More

Required for all RAM device cradles when used with a RAM arm. Not required for connecting RAM device cradles to SW-MOTECH, Techmount, or Adaptive device mounts. Learn More

Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More

SW-MOTECH Bags-Connection Slipstream Tail Bag is a compact 13-liter tail bag suitable for day trips. With it's four point attachment system, this rear bag will fit the passenger seat or rear luggage rack of essentially any motorcycle. It has integrated backpack straps for when you're moving on foot and a bungee net.

The entire soft luggage line offered by SW-MOTECH is sleek and sensible, coming in a variety of sizes, shapes and purposes. The Slipstream rear bag is ideally suited for those with minimal luggage to haul. Maybe you've taken up minimalism and cast off your world possessions - except for your motorcycle, of course, let's not get crazy.

The Slipstream rear bag by SW-MOTECH is an ideal daily use, light travel bag.

Learn More

Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to complement your phone and become the most useful accessory on your motorcycle. Learn More

Share your intentions while you share the road with the Admore Lighting LED Light Bar.

Designed to provide additional running, brake and signal visibility to your motorcycle, the Admore Lighting LED Light Bar is now 60% brighter. Available in clear or smoke lens, the 78, high-intensity, bi-color LEDs provide red running lights, bright red brake lighting and progressive amber turn signals. Built in brake modulation starts the brake signal with three bright flashes to help alert motorists to your intentions.

Learn More

Carry 5-9 liters of your essential gear within reach and in style with the SW-MOTECH QUICK-LOCK EVO Daypack Tank Bag.

Learn More

Share your intentions while you share the road with the AdMore Lighting LED Large Light Bar.

Designed to provide additional running, brake and signal visibility to your motorcycle, the AdMore Lighting LED Mini Light Bar is now 60% brighter. Available in clear or smoke lens, the 96, high-intensity, bi-color LEDs provide red running lights, bright red brake lighting and progressive amber turn signals. Built in brake modulation starts the brake signal with three bright flashes to help alert motorists to your intentions.

Learn More

The RAP-B-200-12U, double socket twist arm, consists of a double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit. Learn More

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More

Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fit on other Ducati models has not yet been tested. Learn More

The RAM-B-346U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball OFFSET. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More

A favorite world wide, the RAM self-leveling drink cup holder will bring a smile to anyone’s face when they get it. Learn More

SW-MOTECH roll-top dry bags are made from waterproof welded tarpaulin PVC. Even when sitting in a puddle, your stuff stays dry! The 60-liter size works well as a stand-alone rear bag. Learn More

Similar in shape to the original windscreen, the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear, smoke gray and gloss black. Learn More

Includes RAM-B-202 base with 2.5" diameter platform. Compatible with all 1" RAM receptacles. Requires RAP-300-1U. Learn More

Plate is 0.87" wide X 2.25" long with a 11mm hole in one end and a 1" RAM ball at the other. Perfect for all motorcycles with standard M10 handlebar mirror mounts. Can be used with most bikes by BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, Triumph, Yamaha, and others with handlebar-mounted mirrors. Learn More

Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up. Fits 2004-2012 BMW R1200GS rear handlebar clamp screws and Triumph Explorer handlebar clamp screws. Learn More

SW-MOTECH Bags-Connection QUICK-LOCK Type 110 ION Tankbag Bottom Ring is used in conjunction with SW-MOTECH Bags-Connection Quick-Lock ION tankbags. Learn More

The Control Clamp Mount fits a wide range of Metric and Harley-Davidson bikes (clutch or brake side). Replaces the two factory pinch bolts with new stainless steel bolts and spacers on the handlebar controls.

Learn More

The future of power management......... is here.

The old methods of power distribution have gone the way of the floppy disk (remember those?).

No more checking or replacing fuses, or installing relays for powering high amperage electronics.

The PDM60 Power Distribution Module has 6 power circuits, making it easy to handle all your gadgets and farkles.The bright LED indicators keep you informed of the status of each circuit.

Learn More

Keep the drive chain and sprockets on your motorcycle properly lubricated while you ride with the Scottoiler vSystem Vacuum Operated Chain Oiler. Learn More

The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. 

Learn More

Euro Mount to clamp to top of 53mm fork tube for Techmount GEN 4 Mounting systems. Learn More

The unique optic in the D2 light was designed to create a massive beam of light that is the perfect balance between distance and width. You won't believe how much light is produced in front of your bike and on the sides of the road. Consuming only 10 watts of power per lamp, the DENALI D2 lights throw a blazing beam of light 423 feet down the road in front of you. That's 3 times further than your typical motorcycle high beam.

All DENALI LED Lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours, that's 6 years without ever being shut off. Yes we went overboard, It's what we do.

Making our lights easy to mount and install on your motorcycle is a top priority for us. Every light includes a universal M8 mounting bracket. Bike specific light mounts are also available for many popular bike models.

Learn More

Dry weather grip, wet weather confidence, excellent handling, long life. These are all the attributes of an excellent sport-touring tire, and they're typically mutually exclusive. Like a long weekend with distant relatives and, ah, fun.

Michelin developed the Pilot Road 4 GT from the popular Pilot Road 3 and emphasized light handling, excellent wear characteristics, and superior traction in the wet. In addition, the GT versions of the Pilot Road 4 sport-touring tire are built for the heavier motorcycles, bikes like BMW's R1200RT, K1300, K1600GT, Honda's ST1300, Kawasaki's Concours 14, and Yamaha's FJR1300.

This tire is beefed up over the standard Pilot Road 4 to offer ideal handling under heavily loaded motorcycles without sacrificing longevity. The best of both worlds. Like Uncle Carl calling to say he won't be at Thanksgiving this year but you can drive his Corvette anyway.

Learn More