x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
KLR650 '86-'07

KLR650 '86-'07

KLR650 '86-'07

FILTER OPTIONS

Grid List

per page

Items 71 to 105 of 236 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. RAM-B-237 camera mount without support platform.  Comaptible with all 1"-diameter RAM sockets.

    RAM Mounts B-237U Base with 1/4-20 Threaded Post for Cameras

    Includes RAM-B-237 camera mount (without platform) with 1/4" x 20 male threaded stud. Can also be used as a base if threaded into a 1/4-20 hole. Learn More
    $8.99 $7.49

  2. RAM-HOL-GA5 mount for Garmin E-Trex-series GPS.

    RAM Mounts HOL-GA5U Cradle for Garmin e-Trex Legend, Summit, Venture, & Vista

    Includes RAM-HOL-GA5U holder for Garmin e-Trex Legend, Summit, Venture, & Vista. Learn More
    $13.49 $11.49

  3. RAM-HOL-GA7 mount for Garmin GPSMAP 176, 176C, 196, 276C, & 296 GPS.

    RAM Mounts HOL-GA7U Cradle for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496

    Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496 Learn More
    $10.99 $9.49

  4. RAM-HOL-GA9 mount for Garmin Streetpilot 2610, 2620, and 2650 GPS.

    RAM Mounts HOL-GA9U Cradle for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820

    Includes RAM-HOL-GA9U holder for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820 Learn More
    $16.49 $13.99

  5. RAM-B-309-7U stainless steel Clutch, Brake, U-bolt combo with ball (for 1-1/8", 1", 7/8", 3/4", & 0.5" diameter bars)

    RAM Mounts B-309-7U Combination Base for 0.5in to 1.25in Handlebars or Brake & Clutch Control Clamps

    Includes U-bolt and all mounting hardware to add a single RAM ball to a 1-1/8", 1", 7/8", or 3/4" diameter bar, as well as being able to connect to your handlebar's left-side clutch clamp or right-side brake clamp. Learn More
    $20.99 $18.49

  6. SALE
    Givi E370 Monolock Topcase (ea) - 39 liters/case

    Givi E370 Monolock Topcase (ea) - 39 liters/case

    Fits all Givi Monolock topracks and flat rear luggage racks like the SW-MOTECH Alu-Rack. Not compatible with Givi Monokey topracks. Learn More
    $179.00 $161.10

  7. RAM-B-272 base for M8 (8mm diameter) mounting points

    RAM Mounts B-272U Offset M8 Bolt & Mirror Post Base

    Aluminum small plate base with 9mm-diameter hole and 1'' ball. For use with any M8 (8mm-diameter) or smaller screw mount point. Learn More
    $12.99 $11.49

  8. AdMore Lighting LED sidecase kit for Givi E360, E460 sidecases

    AdMore Lighting High Output LED Kit for Givi E360 Sidecases

    This kit gives you everything you need to equip 2 GIVI E360 side cases with brake, tail light and turn signal functions. Learn More
    $149.00

  9. AdMore Lighting High Output LED Kit for Givi E41 Sidecases

    AdMore Lighting High Output LED Kit for Givi E41 Sidecases

    This kit gives you everything you need to equip 2 GIVI E41 side cases with brake, tail light and turn signal functions. Learn More
    $149.00

  10. AdMore Lighting High Output LED Kit for Givi E370 Topcase

    AdMore Lighting High Output LED Kit for Givi E370 Topcase

    This AdMore Lighting LED Kit it gives you everything you need to equip your Givi E370 top case with brake, tail light and turn signal functions. Learn More
    $139.00

  11. AdMore Lighting High Output LED Kit for Givi E470 Topcase (running/brake/turn signals)

    AdMore Lighting High Output LED Kit for Givi E470 Topcase (running/brake/turn signals)

    This AdMore Lighting LED Kit gives you everything you need to equip your Givi E470 top case with brake, tail light and turn signal functions. Learn More
    $139.00

  12. AdMore Lighting High Output LED Kit for Givi E450 Topcase (running/brake/turn signals)

    AdMore Lighting High Output LED Kit for Givi E450 Topcase (running/brake/turn signals)

    This 3-function AdMore Lighting LED Kit gives you everything you need to equip your GIVI E450 top case with brake & running lights, as well as turn signals. Learn More
    $139.00

  13. Kaoko Throttle Lock Cruise Control for Select Suzuki, Kawasaki & Yamaha Motorcycles

    Kaoko Throttle Lock Cruise Control for Select Suzuki, Kawasaki & Yamaha Motorcycles

    Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Learn More
    $149.95

  14. MFW Vario Footpeg Mounts for Kawasaki Ninja ER5 '97-'06 & KLR650 '87-'17 | Rider

    MFW Vario Footpeg Mounts for Kawasaki Ninja 500R '87-'09, Ninja ER5 '97-'06 & KLR650 '87-'18 | Rider

    This MFW bike-specific mount allows you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in silver. Learn More
    $62.95

  15. MFW Vario Footpeg Mounts for Kawasaki Ninja 500R '87-'09, ER5 '97-'06 & KLR650 '87-'17 | Passenger

    MFW Vario Footpeg Mounts for Kawasaki Ninja 500R '87-'09, ER5 '97-'06 & KLR650 '87-'18 | Passenger

    This MFW bike-specific mount allows you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in silver. Learn More
    $62.95

  16. Kaoko Throttle Lock Cruise Control for Kawasaki KLR650 '86-'07, Suzuki DL650 V-Strom & DL1000 V-Strom w/ Barkbusters or SW-MOTECH Handguards

    Kaoko Throttle Lock Cruise Control for Kawasaki KLR650 '86-'07, Suzuki DL650 V-Strom & DL1000 V-Strom w/ Barkbusters or SW-MOTECH Handguards

    Want Barkbusters or SW-MOTECH KOBRA handguards and a Kaoko Cruise Control? We've got you covered with this cruise control from Kaoko!

    Learn More
    $139.95

  17. AdMore Lighting High Output LED Kit for Givi E50 Topcase

    AdMore Lighting High Output LED Kit for Givi E50 Topcase

    This kit gives you everything you need to equip your GIVI E50 top case with brake, tail light and turn signal functions. Learn More
    $139.00

  18. MFW Rider Mounts to fit MFW Footpegs for Kawasaki Ninja 500R '87-'06, ER5 '97-'06 & KLR650 '87-'18

    MFW Rider Mounts to fit MFW Footpegs for Kawasaki Ninja 500R '87-'06, ER5 '97-'06 & KLR650 '87-'18

    MFW's bike specific Replacement Brackets allow direct replacement of your original rider footpegs with one of MFW's 3 styles of replacement footpegs. Compatible only with MFW footpegs (sold separately). Sold in pairs. Available in silver. Learn More
    $37.95

  19. AdMore Lighting High Output LED kit for Givi V46 Topcase (running/brake/turn signals)

    AdMore Lighting High Output LED kit for Givi V46 Topcase (running/brake/turn signals)

    This kit gives you everything you need to equip your GIVI V46 top case with brake, tail light, and turn signal functionality. Learn More
    $139.00

  20. RAM-B-342U CYCLE STEM BASE W/ 1" DIA BALL

    RAM Mounts B-342U Fork Stem Mount Base for 12-33mm Fork Stems

    The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5” – 1.10” at the following intervals: Learn More
    $17.49 $15.49

  21. RAM-B-345U RAM RESERVOIR COVER CENTER BALL

    RAM Mounts B-345U Brake or Clutch Reservoir Cover Base | Centered

    The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball CENTERED. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $22.99 $20.49

  22. RAM Mounts B-360U Twist and Tilt Pivot Base for Mirror Mounts & M10 x 1.25 or M8 x 1.25 Threaded Holes

    RAM Mounts B-360U Twist and Tilt Pivot Base for Mirror Mounts & M10 x 1.25 or M8 x 1.25 Threaded Holes

    RAM offers a wide variety of motorcycle mounts. A great new addition to this already extensive product line is our new Twist and Tilt base. Made of die cast marine grade aluminum, durability won't be a concern. The patented rubber ball dampens shock and vibration helping to maintain the performance of the mounted device. Simple to use and install, this great little product is compatible with numerous 1" ball mount systems. Designed to be compact and discrete, the Twist and Tilt won't take up a lot of space but will provide a world of mounting possibilities.

    Learn More
    $22.99 $20.49

  23. AdMore Lighting High Output LED Flush Mount Topcase Kit

    AdMore Lighting High Output LED Flush Mount Topcase Kit

    Admore's low-profile, universal light kit can be mounted on just about any topcase with a relatively flat surface. Each LED light array (5 1/2" x 3/8" x 1/8" each) comes with high strength 3M tape for a quick and permanent installation. These LED light arrays have been designed with the wires exiting from the backside of the array so that no wires are visible after installation. Learn More
    $119.00

  24. RAM-B-202AU 1" Rubber Ball Base with 1/4" x 20 Stud For Camera

    RAM Mounts B-202AU Round Plate with AMPS Hole Pattern & 1/4-20 Threaded Post for Cameras

    The Powder Coated Marine Grade Aluminum Universal Camera Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate with a centered 1/4'' X 20 thread. The plate adds support to the thread, by allowing the camera to rest on the plate, creating a stable connection with the camera.

    Note: The male 1/4'' long, 1/4'' X 20 thread in the middle of the 2.5'' diameter plate will connect to the standard female thread found at the bottom of most still and video cameras. An alternative to this camera mounting system is the Male 1/4'' X 20 Threaded Ball RAM-B-237. Learn More
    $11.49 $9.99

  25. RAM-B-201U-C extension arm (5.25-inch)

    RAM Mounts B-201U-C Long Double Socket Arm | 5.25in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $20.99 $17.99

  26. RotopaX 1-Gallon Water pack

    RotopaX 1 Gallon Water Pack

    Hitting the desert or a war-torn nuclear wasteland where water is in short supply? Then RotopaX 1 gallon water container (white) is a must have. Designed to quickly lock to your ride and just as easily be removed. Don't leave home for that adventure ride without one. Learn More
    $39.95

  27. SALE
    Givi E370NT TECH Monolock Topcase (ea) - 39 liters/case

    Givi E370NT TECH Monolock Topcase (ea) - 39 liters/case

    Fits all Givi Monolock topracks and flat rear luggage racks like the SW-MOTECH Alu-Rack. Not compatible with Givi Monokey topracks. Learn More
    $179.00 $161.10

  28. SW-MOTECH Vibration-Damped Quick Release GPS Holder for 10mm - 12.5mm diameter handlebar crossbars

    SW-MOTECH Vibration-Damped Quick Release GPS Holder for 10mm - 12.5mm diameter handlebar crossbars

    This electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits all 10 to 12.5mm (0.4 to 0.5 inch) diameter crossbars. Compatible with most handlebar crossbars, including the SW-MOTECH universal handlebar crossbar LST.00.244.100. Learn More
    $81.95

  29. Stowable camp table for TraX ALU-BOX side cases

    Stowable camp table for TraX ALU-BOX side cases

    Stowable aluminum camp table for TraX ALU-BOX side cases (37 & 45 liter cases). Available in Silver. Learn More
    $103.95

  30. Galfer Front Steel Braided Brake Line Kit for Kawasaki KLR650 '88-'07

    Galfer Front Steel Braided Brake Line Kit for Kawasaki KLR650 '88-'07

    Galfer stainless steel brake lines greatly improve braking effectiveness! Stock lines are typically made from rubber that expands when the brakes are applied. Steel braided lines are designed to minimize expansion under pressure, which provides a firm, consistent feel at the brake lever for improved feedback and control. Less expansion also means that less lever force is required to achieve maximum braking for reduced braking distances. Learn More
    $59.00

  31. Galfer Rear Steel Braided Brake Line Kit for Kawasaki KLR650 '88-'07

    Galfer Rear Steel Braided Brake Line Kit for Kawasaki KLR650 '88-'07

    Galfer stainless steel brake lines greatly improve braking effectiveness! Stock lines are typically made from rubber that expands when the brakes are applied. Steel braided lines are designed to minimize expansion under pressure, which provides a firm, consistent feel at the rear brake pedal for improved feedback and control. Less expansion also means that less lever force is required to achieve maximum braking for reduced braking distances. Learn More
    $47.00

  32. SW-MOTECH Steel Toprack for Kawasaki KLR650A '86-'07, to fit TraX ALU-BOX, Pelican, Shad, Givi / Kappa, Coocase, & Soft Luggage

    SW-MOTECH Steel Toprack for Kawasaki KLR650A '86-'07, to fit TraX ALU-BOX, Pelican, Shad, Givi / Kappa, Coocase, & Soft Luggage

    SW-Motech's highly functional and elegant toprack features a strong, integrated-looking, lightweight steel design. The smart, multi-functional design accepts many brands of topcases including TraX ALU-BOX, Pelican, GIVI,and Kappa. If you plan to mount one of these topcases be sure to purchase the correct topcase adapter hardware as it is necessary for mounting most topcase models (choose case type in drop down options when checking out). No topcase adapter hardware is needed for mounting Coocase topcases.

    Learn More
    $114.95

  33. SALE
    Givi E340 Vision Monolock Topcase (ea) in matte black - 34 liters/case

    GIVI E340N Vision Monolock Topcase Matte Black with Red Lens | 34 liters

    The smooth style and narrow profile of the E340 topcase features a durable finish, making it a great choice for all types of bikes -- whether sport, cruiser, dual-sport, or standard. With a 34 liter luggage capacity, this case is an excellent topcase choice, as it nicely complements all of the popular GIVI sidecases (E21, E36, and the E360). Note that this topcase features the GIVI Monolock design, which means it must be used with a special fitting plate (included) designed to fit onto flat tubular-style topracks. Fitting to other types of luggage racks may require custom fabrication and a trip to the hardware store. This case will not fit standard GIVI Monolock racks (Wingrack or Monorack) without the use of another special fitting plate (not included). Will not fit most GIVI E-series topracks. Learn More
    $159.00 $143.10

  34. Shad SH-45 Top Case Matte Black Finish

    Shad SH-45 Top Case Matte Black Finish

    The Shad SH45 is a sturdy, large-sized 45 liter topcase featuring red or clear lens. Learn More
    $189.00

  35. SALE
    Givi E450 Simply Monolock Topcase

    Givi E450 Simply Monolock Topcase (ea) | 45 liters/case, Black

    The smooth style and narrow profile of the E450 topcase features a durable finish, making it a great choice for all types of bikes -- whether sport, cruiser, dual-sport, or standard. With a 45 liter luggage capacity, this case is an excellent topcase choice, as it nicely complements all of the popular Givi sidecases. Note that this topcase features the Givi Monolock design, which means it must be used with a special fitting plate (included) designed to fit onto flat tubular-style topracks. Fitting to other types of luggage racks may require custom fabrication and a trip to the hardware store. This case will not fit Givi Monokey racks (Wingrack or Monorack) without the use of another replacement adapter plate (not included). Will not fit most Givi E-series topracks.

    Learn More
    $195.00 $175.50

FILTER OPTIONS

Grid List

per page

Items 71 to 105 of 236 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Chat with us!