x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Duke I 620, '96-'99

Duke I 620, '96-'99

Duke I 620, '96-'99

FILTER OPTIONS

Grid List

per page

Items 36 to 70 of 166 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. RAM Mounts HOL-UN10BU Universal X-Grip IV Large Phone / Phablet Holder with 1in Ball

    RAM Mounts HOL-UN10BU Universal X-Grip IV Cradle for Large Phones or Phablets

    The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. Learn More
    $28.99

  2. DrySpec D78 Waterproof Motorcycle DryBag Modular Packing System in Black, Grey & Orange | 78L Total

    DrySpec D78 Waterproof Motorcycle DryBag Modular Packing System in Black, Grey & Orange | 78L Total

    The D78 Modular Packing System consists of the D38 DrySpec Rigid drybag and the D20 saddlebag set. The D38 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Learn More
    $319.98

  3. RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More
    $30.49

  4. RAM-B-346U RAM RESERVOIR COVER SIDE BALL

    RAM Mounts B-346U Brake or Clutch Reservoir Cover Base | Offset

    The RAM-B-346U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball OFFSET. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $22.49

  5. RAM Self-Leveling Cup Holder with 1" Ball and Sleeve

    RAM Mounts Level Cup Drink Holder with Koozie

    A favorite world wide, the RAM self-leveling drink cup holder will bring a smile to anyone’s face when they get it. Learn More
    $18.49

  6. SALE
    Denali DX Xtreme Spot Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount

    Denali DX Xtreme Spot Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount

    The large 10° optic in the DX maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DX is ideal for night riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp, the Denali DX lights throw a blazing beam of light 695 feet down the road in front of you. That’s over 4 times further than your typical motorcycle high beam.

    Learn More
    $389.99 $350.95

  7. RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349-1U threaded ball base fits many motorcycles including BMW R1200GS, F650GS twins and F800GS threaded mirror holes.

    Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Ideal for use with Doubletake Mirrors.

    Learn More
    $10.99

  8. DrySpec D56 Waterproof Motorcycle DryBag Modular Packing System in Black, Grey & Orange | 56L Total

    DrySpec D56 Waterproof Motorcycle DryBag Modular Packing System in Black, Grey & Orange | 56L Total

    The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags, the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips, but is the ideal add on bag for a D38 or your existing sidecases. Learn More
    $153.98

  9. SW-MOTECH Drybag 600 Tail Bag Roll-Top Dry Bag | 60-Liter Yellow

    SW-MOTECH Drybag 600 Tail Bag Roll-Top Dry Bag | 60L Yellow

    SW-MOTECH roll-top dry bags are made from waterproof welded tarpaulin PVC. Even when sitting in a puddle, your stuff stays dry! The 60-liter size works well as a stand-alone rear bag. Learn More
    $132.95

  10. SW-MOTECH Jetpack Tail Bag / Backpack | 20-33 Liters

    SW-MOTECH Jetpack Tail Bag / Backpack | 20-33 Liters (Hold CAN)

    The SW-MOTECH Jetpack tail bag / backpack is a very versatile cargo solution capable of carrying up to 33 liters of gear for your next motorcycle ride. Tough 1680D ballistic nylon is very durable and lightweight with an aerodynamic shape that is at perfectly suited for mounting on the tail or on your back. The standard 20 liters of storage capacity can be increased to 33 liters total by releasing the zippered expansion panel to ensure you always have room for souvenirs. The engineers at SW-MOTECH designed the Jetpack so it can easily and conveniently come with you while your motorcycle is parked. Don't leave your stuff behind, throw it over your shoulders and carry it comfortably. Enhance your luggage options with the Jetpack tail bag / backpack from SW-MOTECH! Learn More
    $266.95

  11. RAM-B-202 round base with 1"-diameter ball mount.

    RAM Mounts B-202U Round Plate with AMPS Hole Pattern

    Includes RAM-B-202 base with 2.5" diameter platform. Compatible with all 1" RAM receptacles. Requires RAP-300-1U. Learn More
    $7.49

  12. RAM-B-252U Plate Base with 11mm Hole and 1'' Ball

    RAM Mounts B-252U Offset M10 Bolt & Mirror Post Base

    Plate is 0.87" wide X 2.25" long with a 11mm hole in one end and a 1" RAM ball at the other. Perfect for all motorcycles with standard M10 handlebar mirror mounts. Can be used with most bikes by BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, Triumph, Yamaha, and others with handlebar-mounted mirrors. Learn More
    $10.99

  13. RAM motorcycle base for M8 screw

    RAM Mounts B-367U Base for Handlebar Clamps with M8 Bolts

    Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up. Fits 2004-2012 BMW R1200GS rear handlebar clamp screws and Triumph Explorer handlebar clamp screws. Learn More
    $9.99

  14. SW-MOTECH Universal GPS Mount Kit | Medium Navi Bag

    SW-MOTECH Universal GPS Mount Kit | Medium Navi Bag

    The SW-MOTECH Universal GPS Kit allows for a variety of installation options without additional accessories and includes a medium splash-proof NAVi bag to protect your GPS from the elements. Learn More
    $88.95

  15. Rowe Electronics PDM60 - Power Distribution Module - with User Programmable Cable

    Rowe Electronics PDM60 - Power Distribution Module with User Programmable Cable

    The future of power management......... is here.

    The old methods of power distribution have gone the way of the floppy disk (remember those?).

    No more checking or replacing fuses, or installing relays for powering high amperage electronics.

    The PDM60 Power Distribution Module has 6 power circuits, making it easy to handle all your gadgets and farkles.The bright LED indicators keep you informed of the status of each circuit.

    Learn More
    $199.99

  16. DENALI PowerHub2 fuse block, master ground block and wiring harness for motorcycles

    DENALI PowerHub2 fuse block, master ground block and wiring harness for motorcycles

    Made in America!

    The PowerHub2 Power Distribution Module, manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle. Instead of attaching multiple ring terminals to your battery, use a PowerHub2!

    Learn More
    $129.99

  17. RAM Mounts B-202U-152 Rectangular Base Plate with AMPS Hole Pattern | 2in x 1.5in

    RAM Mounts B-202U-152 Rectangular Base Plate with AMPS Hole Pattern | 2in x 1.5in

    The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. 

    Learn More
    $15.49

  18. Oxford Heaterz Premium Sport Motorcycle Heated Grips

    Oxford Heaterz Premium Sport Motorcycle Heated Grips

    The Premium line is Oxford's latest generation of heated grips. The Sport version fits standard 7/8" handlebars and clip-ons and has ergonomically engineered grip pattern to optimize riding performance. The soft, ultra-grippy diamond tread is inspired by race grips for comfort and feedback.

    Learn More
    $89.99

  19. SW-MOTECH Rearbag Tail Bag | 24 -36 Liter

    SW-MOTECH Rearbag Tail Bag / Backpack | 24 -36 Liter

    The SW-MOTECH Rearbag was designed for use as a universal fit tail bag which can also be used as a backpack with 24 liters of cargo capacity that expands to 36 liters total. Reinforced 1680D ballistic nylon is reinforced for strength while also being lightweight enough to work with virtually any motorcycle using the four-point strap system. Designed and engineered in Germany for superior versatility and quality. Be prepared for your next touring adventure and add an SW-MOTECH Rearbag on your motorcycle! Learn More
    $273.95

  20. RAM Mounts B-202U-GA63 Garmin VIRB Camera Adapter

    RAM Mounts B-202U-GA63 Garmin VIRB Camera Adapter

    Provides mounting for Garmin VIRB to RAM 1" Ball Mounting Systems. Learn More
    $7.99

  21. SW-MOTECH Motorcycle Luggage Top Rack for KTM 620 Adventure, 640 Adventure, LC4 Enduros & 640 Supermoto

    SW-MOTECH Motorcycle Luggage Top Rack for KTM 620 Adventure, 640 Adventure, LC4 Enduros & 640 Supermoto

    The SW-MOTECH Motorcycle luggage Top Rack for KTM 620 Adventure, 640 Adventure, LC4 Enduros & 640 Supermoto is a highly functional and elegant mounting system for top cases. The rack features a strong, integrated-looking, lightweight tubular steel design. Learn More
    $118.95

  22. RAM-B-237 camera mount without support platform.  Comaptible with all 1"-diameter RAM sockets.

    RAM Mounts B-237U Base with 1/4-20 Threaded Post for Cameras

    Includes RAM-B-237 camera mount (without platform) with 1/4" x 20 male threaded stud. Can also be used as a base if threaded into a 1/4-20 hole. Learn More
    $7.99

  23. RAM-HOL-GA9 mount for Garmin Streetpilot 2610, 2620, and 2650 GPS.

    RAM Mounts HOL-GA9U Cradle for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820

    Includes RAM-HOL-GA9U holder for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820 Learn More
    $14.49

  24. RAM-HOL-GA5 mount for Garmin E-Trex-series GPS.

    RAM Mounts HOL-GA5U Cradle for Garmin e-Trex Legend, Summit, Venture, & Vista

    Includes RAM-HOL-GA5U holder for Garmin e-Trex Legend, Summit, Venture, & Vista. Learn More
    $14.49

  25. RAM-HOL-GA7 mount for Garmin GPSMAP 176, 176C, 196, 276C, & 296 GPS.

    RAM Mounts HOL-GA7U Cradle for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496

    Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496 Learn More
    $9.49

  26. RAM-B-309-7U stainless steel Clutch, Brake, U-bolt combo with ball (for 1-1/8", 1", 7/8", 3/4", & 0.5" diameter bars)

    RAM Mounts B-309-7U Combination Base for 0.5in to 1.25in Handlebars or Brake & Clutch Control Clamps

    Includes U-bolt and all mounting hardware to add a single RAM ball to a 1-1/8", 1", 7/8", or 3/4" diameter bar, as well as being able to connect to your handlebar's left-side clutch clamp or right-side brake clamp. Learn More
    $18.99

  27. RAM-B-345U RAM RESERVOIR COVER CENTER BALL

    RAM Mounts B-345U Brake or Clutch Reservoir Cover Base | Centered

    The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball CENTERED. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $20.99

  28. RAM-B-201U-C extension arm (5.25-inch)

    RAM Mounts B-201U-C Long Double Socket Arm | 5.25in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $18.49

  29. RAM-B-272 base for M8 (8mm diameter) mounting points

    RAM Mounts B-272U Offset M8 Bolt & Mirror Post Base

    Aluminum small plate base with 9mm-diameter hole and 1'' ball. For use with any M8 (8mm-diameter) or smaller screw mount point. Learn More
    $11.99

  30. RAM-B-342U CYCLE STEM BASE W/ 1" DIA BALL

    RAM Mounts B-342U Fork Stem Mount Base for 12-33mm Fork Stems

    The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5” – 1.10” at the following intervals: Learn More
    $15.49

  31. RAM Mounts B-360U Twist and Tilt Pivot Base for Mirror Mounts & M10 x 1.25 or M8 x 1.25 Threaded Holes

    RAM Mounts B-360U Twist and Tilt Pivot Base for Mirror Mounts & M10 x 1.25 or M8 x 1.25 Threaded Holes

    RAM offers a wide variety of motorcycle mounts. A great new addition to this already extensive product line is our new Twist and Tilt base. Made of die cast marine grade aluminum, durability won't be a concern. The patented rubber ball dampens shock and vibration helping to maintain the performance of the mounted device. Simple to use and install, this great little product is compatible with numerous 1" ball mount systems. Designed to be compact and discrete, the Twist and Tilt won't take up a lot of space but will provide a world of mounting possibilities.

    Learn More
    $20.99

  32. RAM Mounts B-309-2U Handlebar Brake or Clutch Control Clamp Base | Double Mount

    RAM Mounts B-309-2U Handlebar Brake or Clutch Control Clamp Base | Double Mount

    Includes all mounting hardware to add two RAM balls to your handlebar's left-side clutch clamp or right-side brake clamp. Learn More
    $18.49

  33. RAM-B-202AU 1" Rubber Ball Base with 1/4" x 20 Stud For Camera

    RAM Mounts B-202AU Round Plate with AMPS Hole Pattern & 1/4-20 Threaded Post for Cameras

    The Powder Coated Marine Grade Aluminum Universal Camera Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate with a centered 1/4'' X 20 thread. The plate adds support to the thread, by allowing the camera to rest on the plate, creating a stable connection with the camera.

    Note: The male 1/4'' long, 1/4'' X 20 thread in the middle of the 2.5'' diameter plate will connect to the standard female thread found at the bottom of most still and video cameras. An alternative to this camera mounting system is the Male 1/4'' X 20 Threaded Ball RAM-B-237. Learn More
    $10.99

  34. TPX Radar & Laser Detector 2.0 Main Console with Universal Mount Adapter & LED Visual Alert

    TPX Radar & Laser Detector 2.0 Main Console with Universal Mount Adapter & LED Visual Alert

    Designed with the motorcyclist in mind, the TPX Radar & Laser Detector 2.0 Main Console is water, shock, and vibration resistant. Now with increased sensitivity and more mode functions! It features oversized buttons for ease of use with riding gloves. Its large, angled, top-positioned LCD optimizes viewing from all riding positions and is easily viewable in direct sunlight. Now includes LED Visual Alert! Learn More
    $299.00

  35. Scottoiler eSystem Electronic Chain Oiler Kit | With Traditional Blue Scottoil

    Scottoiler eSystem Electronic Chain Oiler Kit | With Traditional Blue Scottoil

    Keep the drive chain and sprockets on your motorcycle properly lubricated while you ride with the Scottoiler eSystem Electronic Chain Oiler. Learn More
    $299.95

FILTER OPTIONS

Grid List

per page

Items 36 to 70 of 166 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Chat with us!