GSR600 '06-'12

MRA Highwayshield windscreens are available in clear or smoke gray. 18.5" (469mm) tall x 16.1" (408mm) middle width x 13" (330mm) top width.
Learn More

Provide weather and wind hand protection with Barkbusters STORM Single Point Clamp Mount Handguard Kit for 7/8 inch diameter handlebars. Learn More

Rox Handlebar Risers with extended stem for 22mm bars on select BMW, Honda, Kawasaki, KTM, Triumph & Ducati Motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them.

These handlebar risers feature an extended riser stem that works with many bikes that come with an angled OEM top clamp (e.g. Buell Ulysses), but technically will fit any 22mm tubular handlebar.

They feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

These Rox risers will mount on essentially any machine that has a handlebar that measures 7/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.

Learn More

Tiny, all-weather clock/thermometer for handlebar or cockpit mounting. Includes ice alert and Velcro adhesive! Learn More

A compact tool kit with carrying case designed to fit under most motorcycle seats. Dimensions: 4"” x 7" x” 1.25"” Learn More

These hand covers mount to your handlebars to keep your hands warm & dry even in the coldest riding weather! A pouch on the inside allows you to add Oxford Electric Hothands for added warmth! Learn More

Carry extra fuel, oil, water or other vital fluids on the outside of your sidecase with the DrySpec Bottle Mount Kit. Learn More

These bar end protectors are simple to fit and replace the factory bar end weights. Learn More

SW-MOTECH QUICK-LOCK Type 125 ION Tank Bag Bottom Ring is used in conjunction with SW-MOTECH Quick-Lock ION tank bags. Learn More

The SW-MOTECH Universal GPS Kit allows for a variety of installation options without additional accessories and includes a medium splash-proof NAVi bag to protect your GPS from the elements. Learn More

Reduce rider fatigue due to wind pressure and turbulence with the MRA V-Flow Screen (style "VFS") Windshield. Learn More

The Trial is a large 15-22 liter tank bag suitable for large bikes with sloped tanks. The perfect tank bag for the Apple iPad, which fits perfectly inside the tank bag's map pocket. Compatible with the SW-MOTECH EVO QUICK-LOCK Tank rings, see the app chart below to determine which tank ring is appropriate for your bike.

Learn More

Reduce rider fatigue due to wind pressure and turbulence with the MRA V-Flow X-Creen Sport Screen (style "VFXS") Windshield. Learn More

This bag only works with ION tank rings

The SW-MOTECH ION One Quick-Lock Tank bag keeps your budget in mind without sacrificing quality. Loaded with the same versatile features as premium priced bags, the motorbike luggage system fits perfectly on most gas reservoirs and is ideal for quick motorcycle trips where you don't need a lot of storage space.

Learn More

Made in America!

The PowerHub2 Power Distribution Module, manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle. Instead of attaching multiple ring terminals to your battery, use a PowerHub2!

Learn More

Keep the drive chain and sprockets on your motorcycle properly lubricated while you ride with the Scottoiler vSystem Vacuum Operated Chain Oiler. Learn More

Reduce rider fatigue due to wind pressure and turbulence with the MRA V-Flow Screen (style "VFSZ") Windshield.

Learn More

The Electric QUICK-LOCK EVO Trial is a large 15-22 liter tank bag suitable for large bikes with sloped tanks. The perfect tank bag for the Apple iPad, which fits perfectly inside the tank bag's map pocket. Compatible with the SW-MOTECH EVO QUICK-LOCK Tank Rings, see the app chart below to determine which type is appropriate for your bike.

Learn More

Reduce rider fatigue due to wind pressure and turbulence with the MRA V-Flow X-Creen Sport Screen (style "VFXZ") windshield. The VFXZ is a taller touring sized windscreen with an X-Creen Sport attached to the top. The bottom edge of the VFXZ is designed for motorcycles with angular or dual headlights.

Learn More

The StreetShield is MRA's smallest screen, specially designed to unobtrusively compliment the style of smaller on or off-road naked bikes. It offers good protection for the size.

Dimensions: L 14.4" x W 9.3"

Learn More

The SW-MOTECH Rearbag was designed for use as a universal fit tail bag which can also be used as a backpack with 24 liters of cargo capacity that expands to 36 liters total. Reinforced 1680D ballistic nylon is reinforced for strength while also being lightweight enough to work with virtually any motorcycle using the four-point strap system. Designed and engineered in Germany for superior versatility and quality. Be prepared for your next touring adventure and add an SW-MOTECH Rearbag on your motorcycle! Learn More

The Micro is a small 2.5-5 liter tank bag. Fits most bikes and is an excellent around town bag. Compatible with most SW-MOTECH EVO QUICK-LOCK Tank Rings, see the app chart below to determine which type is appropriate for your bike.

Learn More

R&G toe chain guards keep your foot from being caught in between the chain and rear sprocket in the event of a crash. It happens! Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms.This device mount will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

MRA VarioTouringScreen windscreens are available in clear, smoke gray, and gloss black. 12" (304mm) tall x 16" (406mm) middle width x 14" (355mm) top width. Learn More

MFW's bike specific Vario Mounting Brackets allow you to use their indexed footpeg mounting system to displace your footpegs using 3 different displacement arms and rotate your footpegs to 8 possible positions. Compatible only with MFW footpegs. Sold in pairs. Available in silver. Learn More

This MFW bike-specific mount allows you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in silver. Learn More

The only pressure gauge you’ll ever need. Precision measuring up to 199.9 PSI/13.8 Bar in 0.1 PSI/BAR increments Learn More

The Oxford Products First Aid kit fits under the seat of most motorcycles (4” x 5.7” x 1.8”) and contains hygienically sealed medical supplies. Learn More

Wrap these quickly and go! This heated grip solution allows you to keep the existing grips on your motorcycle and add heat when needed. Secured with a hook and pile grip strip. Learn More

Givi "EASY LOCK" motorcycle specific mounting ring. Allows the Givi Easy Lock tankbags to hover over your tank to protect the finish. To be used on Suzuki models. Learn More

Quickly charges battery at 600mA/hour until full and maintains a gentle trickle charge to keep battery optimized. Quick-connect leads included for easy coupling to the Oximiser between rides. Wall Bracket and extra long cables make for ease-of-use in your garage. Learn More

R&G toe chain guards keep your foot from being caught in between the chain and rear sprocket in the event of a crash. It happens!
Learn More

This R&G exhaust protector fits Yoshimura R-77 slip-on exhausts. May fit other aftermarket exhausts that are similarly shaped.

Learn More