Share your intentions while you share the road with the Admore Lighting LED Light Bar.
Designed to provide additional running, brake and signal visibility to your motorcycle, the Admore Lighting LED Light Bar is now 60% brighter. Available in clear or smoke lens, the 78, high-intensity, bi-color LEDs provide red running lights, bright red brake lighting and progressive amber turn signals. Built in brake modulation starts the brake signal with three bright flashes to help alert motorists to your intentions.
- Black polycarbonate case.
- 78 high-intensity LEDs.
- Bi-color Amber and Red lighting.
- 3 second brake modulation flashes Red brake signal.
- Amber turn signals pulse in direction of signal.
- Provides day and night visibility.
- Surface mount design.
- Universal black powder-coated bracket included.
- Measures 8in by 1-1/4in by 7/8in.
- Flush mount or bracket mount options.
- Simple installation.
- Mounting instructions, harness, and posi-tap connections included.
Watch the light bar in action
- For installations on motorcycles with an LED Tail Light such as the BMW R1200GS LC '13-'14, it is recommended that the RED wire be connected to the positive circuit of the motorcycle’s Auxiliary Power Supply socket or accessory. With this installation, the BLUE wire continues to be connected to the Tail Light wire. On 2013 to present BMW "R" model applications.. Red and Blue should be merged and connected to 12v switched as found in the Red/Blue trace wire of the fuse holder at the rear base of the tank.
- When installing on a Motus Motorcycle, the 12 volt ignition wire needs to be used since the bike uses a constant lower voltage for factory brake lights.
- Not compatible with the Can-Am F3S Spyder and other machines with OEM twin brake lights that also function as turnsignals. The single function running/brake/left signal/right signal power wires are not present.
Customer Testimonial: Seth K. - Boston, MA. BMW R1200RT Great customer service from Twisted Throttle and from the manufacturer. If you like to be seen, install this product!
Motorcycle Wire Identification Guide
This information is to be used as a guide only.
Always consult the factory wiring diagram for your particular motorcycle model year before attempting any installation.
If your motorcycle is not listed below, check out our article on Determining Your Motorcycle's Brake, Tail & Turn Signal Wires.
BMW | |
---|---|
Tail Lights* | Gray with Black stripe* or Blue with Gray stripe* or Black with Gray stripe* or Red, Yellow and Gray* |
Brake Lights* | Yellow with Gray stripe* or Gray with Black stripe* |
Left Turn Signal | Blue with Red stripe |
Right Turn Signal | Blue with Black stripe |
High Beam Headlight | White |
Low Beam Headlight | Yellow |
Ground | Brown |
*Note: BMW wiring varies drastically on Tail Lights and Brake Lights. Single wire Tail Lights will vary even more. | |
Can-Am Spyder | |
Tail Lights | Orange |
Brake Lights | White |
Left Turn Signal | Gray and Pink |
Right Turn Signal | Brown and Yellow |
Ground | Black |
Harley Davidson | |
Tail Lights | Blue |
Brake Lights | Red with Yellow stripe |
Left Turn Signal | Violet |
Right Turn Signal | Brown |
High Beam Headlight | White |
Low Beam Headlight | Yellow with Black stripe |
Ground | Black |
Honda | |
Tail Lights | Brown with White stripe |
Brake Lights | Green with Red or Yellow stripe |
Left Turn Signal | Orange |
Right Turn Signal | Light Blue |
High Beam Headlight | Blue |
Low Beam Headlight | White |
Ground | Green |
Kawasaki | |
Tail Lights | Red |
Brake Lights | Blue |
Left Turn Signal | Green |
Right Turn Signal | Grey |
High Beam Headlight | Red with Black stripe |
Low Beam Headlight | Red with Yellow stripe |
Ground | Black with Yelow stripe |
Suzuki | |
Tail Lights | Grey |
Brake Lights | White with Black stripe |
Left Turn Signal | Black |
Right Turn Signal | Light Green |
High Beam Headlight | Yellow |
Low Beam Headlight | Black with Blue stripe |
Ground | Black with White stripe |
Yamaha | |
Tail Lights | Blue |
Brake Lights | Yellow |
Left Turn Signal | Brown |
Right Turn Signal | Green |
High Beam Headlight | Yellow |
Low Beam Headlight | Green |
Ground | Black |
- Review by RhodeTrip
-
Rating - Review by gpr
-
Rating - Review by CB111
-
Rating
Install is easy once the bikes wires are identified. (Posted on 3/28/2016) - Review by RodsXR
-
Rating - Review by James
-
Rating - Review by Lloyd
-
Rating
Excellent support from the manufacturer. (Posted on 11/2/2015) - Review by twili
-
Rating - Review by KLRKeith
-
Rating - Review by Superfunkomatic
-
Rating - Review by Kiki
-
Rating - Review by Irfrank
-
Rating - Review by chuck
-
Rating - Review by Jack
-
Rating - Review by Ackmando
-
Rating - Review by citybiker
-
Rating - Review by YuuuuuuuuuuuuuuP
-
Rating - Review by Dino
-
Rating - Review by Bigboy61
-
Rating
It is one of the many farkles that I am glad that I had installed. It really aids, in conjunction with your rear brakes, an extra level for cagers to see you during turning and stopping.
The extra Admore lights have proven to be a great assets for any motorcycle! (Posted on 9/2/2014) - Review by Patrick
-
Rating - Review by Guest
-
Rating - Review by frankenbeemer
-
Rating - Review by Markst1100
-
Rating
Was an easy install on my ST-1100, took less than an hour. (Posted on 7/29/2014) - Review by Mr_Canoehead
-
Rating - Review by Anonymous
-
Rating - Review by Anonymous
-
Rating - Review by Aaron
-
Rating - Review by christopher
-
Rating