YZF-R1 '07-'08

Personal Device holder to securely hold your iPhone, Samsung, HTC, Motorola or any other cellphone to your motorcycle. Techmount designed this part to fit handlebar sizes from 7/8in (22mm) up to 1.25in (32mm) into one mount system. This allows the Techmount GEN 4 TechGripper personal device holder to fit virtually every motorcycle with tubular handlebars Learn More

This SW-MOTECH Hard Case for iPhone 6 Plus is designed to offer true weather protection for your expensive device while out enjoying your motorcycle adventure. Each mobile phone cover allows for touch screen navigation via a transparent window. Pivoting 360°, the hard case for iPhone 6 Plus easily rotates so you can view your device in portrait or landscape view. Capped cable ports grant easy connectivity, while a padded silicon insert within the case ensures a snug fit with added shock absorption. The camera lens is protected by a clear window to protect from exposure to water or dirt, allowing you to snap those wicked shots whilst in motion.

Learn More

The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow the powerful horn to be mounted separately from the compressor for the most efficient use of space. The lightweight components can be securely mounted with cable ties. For maximum safety the compact compressor instantly supplies air to the trumpet by pressing the factory horn button. An upgraded  Plug-N-Play Wiring Kit is highly recommended and simple to connect. Significantly improve your safety and visibility with the SoundBomb split dual tone air horn from DENALI!

Learn More

The RAM X-Grip II has a four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle. 

The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets. 

Learn More

Clean up those left over spaces when changing out the large OEM signals for the sleek R&G micro indicators (RG.RG370, RG.RG371, RG.RG372.BK or RG.RG372.SI).  This indicator kit is designed to fit select Yamaha motorcycles and can be used on both the front and rear indicator mounting points.  

If the micro indicators end up flashing improperly you can get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each, these resistors will help generate a proper flash rate. The R&g resistors require no cutting, crimping or soldering.

Learn More

Change even the toughest adventure tires on the street or trail with a Motion Pro BeadPro Tire Bead Breaker and Lever Tool Set. Why carry both a bead-breaker and a set of tire irons when you can have both crucial functions in handy pair of tools? This patented, innovative tool set incorporates a forked bead breaker feature on one end of each lever to break the tire bead. The other end of each lever has a tire spoon to ease tires off and back on the rim while protecting the tire and rim from damage. Packs light, works great.

Learn More

The Kryptonite Evolution series 4 Disc Lock Premium Pack contains a device that will reduce the chance of someone leveraging their way into walking off with your bike. There just isn't enough room to accomplish this underhanded theft method. Learn More

The RAM Mounts RAM-B-224-1U 3.3" diameter suction cup base with 1" Ball mounts to any smooth non porous surface like glass and plastic to serve as a foundation for all the RAM possibilities. Strong composite and powder coated marine grade aluminum ensure your gadgets are reliably secure. With the suction cup base you can now move your favorite cell phone holder or navigation unit from the motorcycle to the car on those days when you absolutely must drive. Learn More

Euro Mount to clamp to top of 58mm fork tube for Techmount GEN 4 Mounting systems. Learn More

Double Mounting Top Plate Kit for Techmount GEN 4 Mounting systems. Learn More

The Garmin Tire Pressure Monitor Sensor (TPMS) enables you to monitor your motorcycle’s tire pressure easily and conveniently, as you ride. The system works with up to 4 tires in any configuration (not intended for automotive use). One TPMS sensor is required for each tire (sold separately; metal valve stems only). Learn More

Get solid tank grip without snagging! TechSpec Gripster General Sheets with the center tank protector allow you to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.

Learn More

Universal Surface Mount for Techmount GEN 4 Mounting systems. Learn More

Yuasa has been powering motorcycles in the USA since 1979 and supplies more Original Equipment Batteries to manufacturers than any other brand. Learn More

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More

The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. 

Learn More

The Dynaplug Pro tire repair tool is designed for all tubeless tires. The compact and light weight size is perfect for motorcyclists. Easy-to-use, neat and clean with no need for "reamers", messy glues or solvents. Learn More

Get solid tank grip without snagging! Get the TechSpec Gripster Set for Yamaha YZF-R1 '07-'08. Learn More

Repair and inflate a punctured tubeless tire on your motorcycle easily with the Stop & Go Tubeless Puncture Pilot Tire Plugger Kit with 12 Volt Air Compressor Learn More

Whether you're a park ranger or a serious outdoorsman, having your side arm ready just makes sense. Ram has designed this to make it easy to adapt your holster with this to any Ram mount product.

Learn More

The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. Learn More

The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures, plus it makes your bike look like a space man. Learn More

The RAM Mounts Torque 1 1/8” – 1 1/2" handlebar mount with 1” ball permits installation of accessories to the handlebar of your motorcycle.. Add your favorite navigation unit, action camera, mobile phone, cup holder and more! High quality marine grade aluminum construction makes the Torque a perfect foundation for supporting your accessories. Recessed bolts and hardware offer a super clean appearance that looks factory original. Install a Torque handlebar mount on your motorcycle and enjoy the added versatility and convenience of having any device right at your fingertips! Learn More

The RAM Mounts Torque 3/4” – 1" handlebar mount with 1” ball allows the installation of accessories to the handlebar of your motorcycle.. Add a navigation unit, action camera, mobile phone, cup holder and more! High strength marine grade aluminum construction makes the Torque a perfect foundation for supporting any of your gadgets.. Recessed clamp hardware offers a very clean appearance that looks like it left the factory that way. Install a Torque handlebar mount and enjoy enhanced versatility and the convenience of having any device right where you need it!

Learn More

The RAM mounts RAM-B-347U 2”x 1.7” base with 1” ball, universal AMPs hole pattern is your Garmin Zumo, TomTom Rider & Urban Rider cradle mounting solution. This product is manufactured out of marine grade aluminum and black powder coated for a durable finish. The base features a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base, which has four pre-drilled holes at each corner creating the universal AMPs pattern. Easily attach the RAM-B-347U to your RAM Mount on your motorcycle for safe and secure mounting solution for your GPS cradle. Learn More

If you have a motorcycle and a Nuvi 30, then grab the RAM Mounts UNPKD cradle for Garmin Nuvi 30 to attach it to any RAM mounting product or components that have the universal AMPs hole pattern. Included with the holder is a set of two nuts and bolts to connect the cradle to any mounts that sport the universal AMPs hole pattern or RAM components. The cradle for Garmin Nuvi 30 is manufactured using a high strength composite to ensure longevity. Learn More

Garmin motorcycle mounting bracket For Garmin Zumo 590LM & 595LM GPS units with integrated power cable

You can easily mount and charge you Garmin Zumo 590LM or 595LM GPS unit on the handlebars of your motorcycle using this handy kit.  This mounting kit features a bare-wire power cable that enables the charging capabilities using your motorcycles power.  

Cables Included:
1. USB connector (with weather cap)
2. Bare wire with inline fuse for power connection
3. Microphone jack in
4. Audio In
5. Audio Out

Learn More

Securely mount devices such as smart phones, cameras or GPS units to your motorcycle with a mounting system that includes a RAM Mounts B-236U 1 inch ball base with ⅜ inch 16 threaded post. Replace a three-eighths coarse thread bolt with this handy mount. With available extension arms and device adapters, you can have your gadgets where you need them on your next ride with a B-236U base by RAM Mounts. Learn More

Keep your drink handy and in its container with a self leveling RAM Mounts RAP-B-417BU Level Cup Holder XL. With wide, springlike rubber feet and adjustable height, this cupholder will fit some of the largest and fanciest drink receptacles in the free market today. Enjoy your double mocha caramel latte without spilling a drop on your farkles with a RAP-B-417BU Level Cup by RAM Mounts. Learn More

Wrap these quickly and go! This heated grip solution allows you to keep the existing grips on your motorcycle and add heat when needed. Secured with a hook and pile grip strip. Learn More

The Powder Coated Marine Grade Aluminum Universal Camera Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate with a centered 1/4'' X 20 thread. The plate adds support to the thread, by allowing the camera to rest on the plate, creating a stable connection with the camera.

Note: The male 1/4'' long, 1/4'' X 20 thread in the middle of the 2.5'' diameter plate will connect to the standard female thread found at the bottom of most still and video cameras. An alternative to this camera mounting system is the Male 1/4'' X 20 Threaded Ball RAM-B-237. Learn More

Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349U threaded ball base fits many motorcycles including the Victory Vision. Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Learn More

Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More

Includes all mounting hardware to add two RAM balls to your handlebar's left-side clutch clamp or right-side brake clamp. Learn More