x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Engine Case Sliders

Engine Case Sliders

Engine Case Sliders

Engine case sliders offer protection for the vulnerable edges of the motor that would otherwise contact the ground in the event of a tip over or slide resulting in serious damage. High Density Polyethylene, Kevlar reinforced carbon fiber and machined aluminum armor. These guards are designed to give optimal coverage at the point of impact with abrasion resistance and impact absorbing properties to keep the motor safe. Protection masters SW-MOTECH and R&G offer bike specific case sliders for both sides of most popular motorcycles. Installation is relatively simple with replacement hardware and no need to change gaskets or complete an oil change. Invest in critical protection for your motorcycle and install a set of engine case sliders!

FILTER OPTIONS

Grid List

per page

Items 71 to 99 of 99 total

Page:
  1. 1
  2. 2
  3. 3
  1. R&G Engine Case Slider For Triumph Speed Triple R

    R&G Engine Case Slider For Triumph Speed Triple R '16-'18 & Triumph Speed S '16-'18 | Left Hand Side

    A crash or slide can cause unwanted and expensive to repair damage to your motorcycles engine case. By adding this engine case slider you're giving your motorcycle some well deserved protection. Pieces of high density polyethylene mount to your existing engine case perfectly thanks to the innovative 3D scanning technologies R&G uses in the manufacturing process. Rather than your expensive engine case getting damaged the slider takes the impact and saves you an trip to the mechanic. It takes just a few minutes to install the R&G engine case slider with all mounting hardware and installation instructions included. Learn More
    $49.95

  2. R&G Engine Case Slider For Suzuki SV650 '17 - right side

    R&G Engine Case Slider For Suzuki SV650 '17 | Right Side

    The R&G engine case slider was designed for to protect your vulnerable engine from damage during a crash or slide.  R&G developed this protective slider using 3D scanning technologies that ensures a perfect fit and fabricates them out of high density polypropylene for strength.  These sliders simply bolt over your original motorcycles casing and are slimlined to provide you with maximum ground clearance.  The engine case sliders are ultra lightweight super good looking and could save you hundreds of dollars in the event of a mishap.

    Special Note: The installation of this product requires you to remove the case cover bolts. Be sure when adding this protective cover to your motorcycle to only remove the bolts required to complete the install. Leave the existing cover in place and place this protective puck over the exiting cover and replace the bolts. Otherwise you may be required to replace engine fluids and gaskets.

    Learn More
    $50.95

  3. R&G Engine Case Slider for Suzuki SV650 '17 - left side

    R&G Engine Case Slider for Suzuki SV650 '17 | LHS - Stator

    The R&G engine case slider for Suzuki SV650 '17 provides protection for the left side stator case in the event of a fall or slide. CNC machined High Density Polyethylene is impact absorbing and abrasion resistant to keep the vulnerable motor from getting rashed on the pavement. This essential slider is a great investment and could save you hundreds of dollars in expensive repairs. Installation is easy and does not require any oil loss, gasket changes or other modifications. Protect your SV650 and install an engine case slider from the protection experts at R&G! Learn More
    $50.95

  4. R&G Engine Case Slider For Suzuki GSX-S1000, GSX-S1000 ABS & GSX-S1000FA '15 | Left Hand Side

    R&G Engine Case Slider For Suzuki GSX-S1000 '15-'18, GSX-S1000 ABS '15-'18 & GSX-S1000FA '15-'18 | Left Hand Side

    This R&G Engine Case Slider is specifically designed for your Suzuki GSX-S1000 using 3D scanning and printing technologies. These modern processes allow R&G to make sure this product fits perfectly and seamlessly onto your motorcycle. Learn More
    $61.95

  5. R&G engine case slider for Suzuki GSX-R1000 '07-'08, GSX-S1000 '15-'18 & GSX-S1000F '15-'18 RHS

    R&G engine case slider for Suzuki GSX-R1000 '07-'08, GSX-S1000 '15-'18 & GSX-S1000F '15-'18 RHS

    This engine protector was designed to fit the left hand side (LHS) case cover. Left hand case slider also available here: RG.ECS0035BK Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More
    $49.95

  6. R&G engine case slider for Suzuki GSX-R1000 '05-'08 LHS

    R&G engine case slider for Suzuki GSX-R1000 '05-'08 LHS

    This engine protector was designed to fit the left hand side (LHS) case cover. Left hand case slider also available here: RG.ECS0035BK Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More
    $54.95

  7. R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R

    R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R '17 | RHS

    The R&G engine case slider for Suzuki GSX-R1000 & GSX-R1000 '17 | RHS defends the factory original clutch case cover from damage that can occur during a fall or slide. Abrasion resistant and impact absorbing High Density Polyethylene (HDPE) is used as a buffer between the cover and the road to prevent wear through and cracks that can lead to dangerous oil loss. This protective case slider mounts to the lower edge utilizing factory original holes without the need to drill, cut or perform any other modifications. Highly recommended for all motorcycles as a relatively inexpensive investment that could prevent an expensive repair bill even after a small slide. Keep the heart of your GSX-R safe and install an engine case slider from the protection experts at R&G! Learn More
    $66.95

  8. R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R | LHS

    R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R '17 | LHS

    The R&G engine case slider for Suzuki GSX-R1000 & GSX-R1000R '17 | LHS provides critical protection for the vulnerable lower edge of the OEM stator case in the event of a fall or slide. High Density Polyethylene is impact absorbing and abrasion resistant to safeguard against striking the pavement and "road rash" or wear through. This clever slider is excellent insurance for your motorcycle and highly recommended on the street to reduce the risk of damage and expensive repairs. Without proper protection, even a light tip over or low speed slide can cause a fracture or oil leak, don't leave your motor exposed. Modifications are not necessary and installation is simple with the use of extended mounting bolts. Keep the heart of your GSX-R safe and install an engine case slider from R&G! Learn More
    $59.95

  9. R&G engine case slider for Suzuki GSR600 '08-'10, GSR750 '11-'14 & GSX-S750 '15-'16 | LHS

    R&G engine case slider for Suzuki GSR600 '08-'10, GSR750 '11-'14 & GSX-S750 '15-'16 | LHS

    This engine protector was designed to fit the left hand side (LHS) case cover. Left hand case slider also available here: RG.ECS0035BK Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More
    $54.95

  10. R&G engine case slider for Suzuki GSR 600 '08-'10, GSR750 '11-'14 & GSX-S750 '15-'16 | RHS

    R&G engine case slider for Suzuki GSR 600 '08-'10, GSR750 '11-'14 & GSX-S750 '15-'16 | RHS

    This engine protector was designed to fit the right hand side (RHS) case cover. Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More
    $42.95

  11. R&G engine case slider for KTM 990 Super Duke, 990 Adventure, 950/990 SM, 990 SMT & 990 SMR - RHS

    R&G engine case slider for KTM 990 Super Duke, 990 Adventure, 950/990 SM, 990 SMT & 990 SMR - RHS

    This engine protector was designed to fit the right hand side (RHS) case cover only. The left hand case slider also available here: RG.ECS0011C Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More
    $92.95

  12. R&G Engine Case Slider For KTM 1290 Super Duke GT ’17 | Right Hand Side

    R&G Engine Case Slider For KTM 1290 Super Duke GT '17 | Right Hand Side

    Manufactured out of high-density polypropylene for strength and durability this R&G engine case slider protects your motorcycles engine casing. While riding the last thing you want to think about is cracking your engine case; so grab this handy lightweight slider for high quality and good looking protection. It bolts perfectly over your original motorbikes casing thanks to the 3D scanning technologies implemented in the engineering of the slider. During a crash or slide, this slider takes the impact and will save the expensive to repair engine case. Invest in high-quality protection with R&G! Learn More
    $65.95

  13. R&G Engine Case Slider for Kawasaki Ninja 650 & Z650 (Actual Slider may appear slightly different)

    R&G Engine Case Slider for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Right Side

    The R&G engine case slider for Kawasaki Ninja 650 & Z650 | right side protects the motor from impacts and abrasion in the event of a tip over or slide. High Density Polyethylene construction is the same material utilized in the successful frame and axle sliders to keep the vulnerable lower section of the motor from dangerous contact with the pavement. This essential slider mounts over the original engine case and secures to the factory mounting holes of the OEM case cover. Installation should only take a few minutes without drilling, cutting, sanding or any other permanent modifications. Keep the heart of your Kawasaki safe from damage with an engine case slider from the protection professionals at R&G! Learn More
    $57.95

  14. R&G Engine Case Slider for Kawasaki Ninja 650 & Z650 | Left Side

    R&G Engine Case Slider for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Left Side

    The R&G engine case slider for Kawasaki Ninja 650 & Z650 | left side safeguards the motor from contacting the pavement in the event of a tip over or slide. High Density Polyethylene (HDPE) construction is impact and abrasion resistant to prevent cracking or wear through that can lead to costly repairs. HDPE is the same material utilized in the successful frame and axle sliders to keep the vulnerable lower edge safe from road rash during an incident. This protective slider mounts to the factory bolt holes of the OEM case cover. Installation takes only a minute without the need for permanent modifications. Protect the heart of your Kawasaki with an engine case slider from the protection experts at R&G! Learn More
    $57.95

  15. R&G Engine Case Slider for Honda CBR1000RR /SP/SP2

    R&G Engine Case Slider for Honda CBR1000RR /SP/SP2 '17 | LHS

    Protect the vulnerable lower leading edge of your motor during a fall or slide with the R&G engine case slider for Honda CBR1000RR /SP/SP2 | LHS. Impact absorbing and abrasion resistant HDPE (High Density Polyethylene) is used to prevent direct contact with the pavement and help slow your machine to a controlled stop. This essential case slider is highly recommended to protect the expensive magnesium engine case cover and is a very wise investment considering the replacement cost of the OEM cover. Installation does not require modifications, gasket replacement or even losing a drop of oil. Protect the left side of your CBR with this case slider from R&G! Learn More
    $72.95

  16. R&G Engine Case Slider for Ducati Scrambler 803 '15-'16 | Left Hand Side – Silver

    R&G Engine Case Slider for Ducati Scrambler 800 '15-'17 | Left Hand Side – Silver

    The super good looking brushed aluminum R&G engine case slider was specifically designed for your Scrambler. This slider is manufactured using abrasion resistant polyethylene for its impact strength and friction resistant properties. When this material hits the pavement, it takes the impact and keeps your vulnerable and valuable engine case up off the ground. This action prevents cracks and loss of oil. In a slide, the high strength polyethylene slows down and smooths out a skid prohibiting a cringe worthy grind. Invest in superb protection and ride home after a spill, instead of watching your motorbike bleed out waiting for a tow.

    You can find the black version of the R&G engine case slider here.

    Learn More
    $61.95

  17. R&G Engine Case Slider for Ducati Scrambler 803 '15 | Left Hand Side

    R&G Engine Case Slider for Ducati Scrambler 800 '15-'17 | Left Hand Side

    The R&G Engine Case Slider is designed to keep your OEM cover off the ground and minimize damage during a slide or fall. Abrasion resistant polyethylene actually helps to slow the bike down in a slide without catching to cause potentially greater damage. Invest in an extra layer of protection for your Scrambler so you can ride home after a spill instead of losing oil from a damaged case and waiting for a tow truck.

    Learn More
    $54.95

  18. R&G engine case slider for BMW K1200R, K1200S, K1200GT, K1300R & K1300S

    R&G engine case slider for BMW K1200R, K1200S, K1200GT, K1300R & K1300S

    These engine case sliders for the BMW K1200R, K1200S, K1200GT, K1300R and K1300S models fit neatly and easily to the existing engine case and will provide additional protection in the event of a drop. R&G Racing engine case sliders compliment the R&G Racing crash protectors and the additional range of products that we offer for these bikes Learn More
    $54.95

  19. R&G Racing Engine Case Slider For Benelli Cafe&acute Racer 1130 '06 -

    R&G Engine Case Slider For Benelli 1130 Cafe Racer '06-'14

    R&G Engine Case Slider For Benelli 1130 Café Racer '06 - . This engine protector was designed to fit the right hand side (RHS) case cover. Crafted from high density nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The sliders simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ...

    Learn More
    $54.95

  20. R&G Engine Case Slider Engine Case Slider For Triumph Bonneville T120 RHS

    R&G Engine Case Slider Engine Case Slider For Select Triumph Motorcycles | Right Hand Side

    R&G Engine Case Slider

    The R&G engine case slider protects your original cover from damage in the event of a slide or fall. This slider is manufactured out of abrasion resistant high-density polyethylene (HDPE) and designed to suit the shape of your factory engine case cover. The properties of HDPE will actually slow down your motorcycle in the event of a slide without catching and potentially amassing more damage. Put the R&G engine case slider between your vulnerable and expensive to repair engine case and breathe a little easier during a mishap.

    Learn More
    $54.95

  21. R&G Engine Case Slider Engine Case Slider For Triumph Thruxton 1200

    R&G Engine Case Slider Engine Case Slider For Select Triumph Motorcycles | Left Hand Side

    In the event of a drop or a slide your engine case can experience some unwanted and expensive to repair damages. By installing the R&G engine case slider you are putting a barrier between your motorcycle’s original case cover and the pavement. R&G uses high-density polyethylene (HDPE) to manufacture the slider and designs it to suit the shape of your engine case. This material will actually slow down your motorbike in the event of a slide without catching and you're having to watch your pride and joy flip down the road. Invest high-quality and great looking protection with R&G!

    You can find the right-hand side R&G engine case cover RG.ECS0109BK here.

    Learn More
    $54.95

  22. R&G Engine Case Guards for Honda CRF450R & CRF450X '14

    R&G Engine Case Guards for Honda CRF450R & CRF450X '14 | 2 Piece Set

    Your bike is one of your most valued investments; protect it's most vulnerable components with the R&G Engine Case Guards for Honda CRF450R & CRF450X. Learn More
    $135.95

  23. R&G Carbon Kevlar Left Side Cylinder Head Guards for Select BMW Motorcycles

    R&G Carbon Kevlar Left Side Cylinder Head Guards for Select BMW Motorcycles

    R&G engine case slider (left hand cylinder) for BMW HP2 Enduro & Megamoto, R1200GS, R1200RT, R1200S, R1200ST is made from Carbon Kevlar and fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop. Fitted with the use of a tough silicon sealant (provided with the kit) for secure adhesion.

    Learn More
    $114.99 $92.95

  24. R&G Carbon Kevlar Engine Case Slider for KTM 1050 Adventure & 1290 Super Adventure | Right Hand Side

    R&G Carbon Kevlar Engine Case Slider for KTM 1290 Super Adventure ‘15-’17 | Right Hand Side

    Protect the motor housing on your motorcycle from damage with an R&G Carbon Kevlar Engine Case Slider for KTM 1290 Super Adventure. With genuine Dupont Kevlar backed carbon fiber, this guard not only looks great, but provides superb insurance against protruding rocks as well as pavement during a low or high speed drop. Help to keep a boulder or a casual spill from ending your adventure with Carbon Kevlar engine case sliders by R&G. Learn More
    $100.95

  25. R&G Carbon Kevlar Engine Case Slider for KTM 1050 Adventure ‘15-’17 & 1290 Super Adventure ‘15-’17 | Left Hand Side

    R&G Carbon Kevlar Engine Case Slider for KTM 1290 Super Adventure ‘15-’17 | Left Hand Side

    Protect the motor housing on your motorcycle from damage with an R&G Carbon Kevlar Engine Case Slider for KTM 1290 Super Adventure. With genuine Dupont Kevlar backed carbon fiber, this guard not only looks great, but provides superb insurance against protruding rocks as well as pavement during a low or high speed drop. Help to keep a boulder or a casual spill from ending your adventure with Carbon Kevlar engine case sliders by R&G. Learn More
    $100.95

  26. R&G Carbon Fiber Engine Case Slider for Ducati 899 Panigale '14-'15, 1199 Panigale '12-'14 & 1299 Panigale / S '15-'17 | Clutch

    R&G Carbon Fiber Engine Case Slider for Ducati 899 Panigale '14-'15, 1199 Panigale '12-'14 & 1299 Panigale / S '15-'17 | Clutch

    The R&G carbon fiber engine case slider for Ducati Panigale 899, Panigale 1199 & Panigale 1299 - Clutch protects the impact area of the vulnerable clutch cover from damage during a tip over, slide or crash. Beautifully woven construction is reinforced with Dupont Kevlar for increased strength and wear resistance. Installation is simple with adhesive silicone (included) to keep a low profile for maximum cornering clearances and lean angles. Keep your Italian supermodel looking its best with a carbon fiber engine case slider from the protection experts at R&G! The R&G Left Side Carbon Engine Case Slider RG.ECS0067.C is available here.

    Learn More
    $92.95

  27. R&G Carbon Fiber Engine Case Cover for Select Triumph Motorcycles

    R&G Carbon Fiber Engine Case Cover for Select Triumph Motorcycles

    This carbon fiber engine protector was designed to fit the left hand side (LHS) case cover. Left hand case slider also available here: RG.ECS0035BK Crafted from for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More
    $92.95

  28. Kappa PH5108K Cylinder Head Guards for BMW R1200GS LC, R1200R, R1200RS & R1200RT

    Kappa PH5108K Cylinder Head Guards for BMW R1200GS LC '13-'18, R1200R '15-'18, R1200RS '15-'18 & R1200RT '14-'18

    The Kappa PH5108K cylinder head guards for BMW R1200GS LC, R1200R, R1200RS and R1200RT add protection to prevent damage from trail debris or directly contacting the ground in the event of a fall. Robust aluminum construction is strong yet lightweight and hard anodized for a durable and corrosion resistant finish. These attractive guards mount directly to the cylinder head without drilling or any permanent modifications. Sold as a pair. Don't leave your heads exposed, safeguard them with these sharp looking cylinder head guards from Kappa! Learn More
    $179.00

  29. SALE
    GIVI PH5108 Cylinder Head Guards for BMW R1200GS LC

    GIVI PH5108 Cylinder Head Guards for BMW R1200GS LC '13-'16

    The GIVI PH5108 cylinder head guards for BMW R1200GS LC '13-'16 add protection to prevent damage from trail debris or directly contacting the ground in the event of a fall. Robust aluminum construction is strong yet lightweight and hard anodized for a durable and corrosion resistant finish. These attractive guards mount directly to the cylinder head without drilling or any permanent modifications. Sold as a pair. Don't leave your heads exposed, safeguard them with these sharp looking cylinder head guards from GIVI! Learn More
    $199.00 $179.10

FILTER OPTIONS

Grid List

per page

Items 71 to 99 of 99 total

Page:
  1. 1
  2. 2
  3. 3
Chat with us!