Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Engine Case Sliders

Engine Case Sliders

Engine Case Sliders

Engine case sliders offer protection for the vulnerable edges of the motor that would otherwise contact the ground in the event of a tip over or slide resulting in serious damage. High Density Polyethylene, Kevlar reinforced carbon fiber and machined aluminum armor. These guards are designed to give optimal coverage at the point of impact with abrasion resistance and impact absorbing properties to keep the motor safe. Protection masters SW-MOTECH and R&G offer bike specific case sliders for both sides of most popular motorcycles. Installation is relatively simple with replacement hardware and no need to change gaskets or complete an oil change. Invest in critical protection for your motorcycle and install a set of engine case sliders!

Grid List

per page

Items 71 to 78 of 78 total

Page:
  1. 1
  2. 2
  3. 3
  1. SW-MOTECH Engine Case Sliders for BMW S1000RR '10-'15 & S1000R '14-'15

    SW-MOTECH Engine Case Sliders for BMW S1000RR '10-'16, S1000R '14-'16 & S1000XR '15-'16

    Crafted from milled aluminum, these SW-MOTECH Engine Case Sliders are designed to protect your engine in the event of a spill or slide. Anodized black aluminum sliders bolt directly over your original case. The left hand side has a replaceable silver anodized aluminum block to provide more material to wear through.

    Learn More
    $140.95

  2. R&G Engine Case Slider for Ducati Scrambler 803 '15 | Left Hand Side

    R&G Engine Case Slider for Ducati Scrambler 803 '15-'16 | Left Hand Side

    The R&G Engine Case Slider is designed to keep your OEM cover off the ground and minimize damage during a slide or fall. Abrasion resistant polyethylene actually helps to slow the bike down in a slide without catching to cause potentially greater damage. Invest in an extra layer of protection for your Scrambler so you can ride home after a spill instead of losing oil from a damaged case and waiting for a tow truck.

    Learn More
    $65.99

  3. R&G Engine Case Slider for Yamaha YZF R1 '15 | Left Hand Side

    R&G Engine Case Slider for Yamaha YZF R1 '15-'16 | Left Hand Side

    The R&G Engine Case Slider is designed to quickly and easily bolt over the edge of the OEM Stator cover for impact and slide protection during a slide or crash. Abrasion resistant High Density Polyethylene is the same material used in the frame and axle sliders to help slow the bike and give motor a sliding surface so the cover itself is not ground down as the bike slides to a stop. Invest in critical protection for your Crossplane with this case slider from R&G!

    Learn More
    $70.99

  4. R&G Engine Case Slider for Yamaha YZF R1 '15 | Right Hand Side

    R&G Engine Case Slider for Yamaha YZF R1 '15-'16 & FZ-10 '17 | Right Hand Side

    The R&G Engine Case Slider is designed to quickly and easily bolt over the bottom edge of the right side engine cover for added impact and slide protection during a fall or crash. Machined from Abrasion resistant High Density Polyethylene (HPDE) to help slow the bike and give motor a sliding surface so the cover itself is not ground down as the bike slides to a stop. HPDE is the same material R&G uses in the frame and axle sliders for complete bike protection. Invest in critical protection for your Crossplane with this case slider from R&G!

    Learn More
    $70.99

  5. R&G Engine Case Slider For Suzuki GSX-S1000, GSX-S1000 ABS & GSX-S1000FA '15 | Left Hand Side

    R&G Engine Case Slider For Suzuki GSX-S1000 '15-'16, GSX-S1000 ABS '15-'16 & GSX-S1000FA '15-'16 | Left Hand Side

    This R&G Engine Case Slider is specifically designed for your Suzuki GSX-S1000 using 3D scanning and printing technologies. These modern processes allow R&G to make sure this product fits perfectly and seamlessly onto your motorcycle. Learn More
    $70.99

  6. R&G Engine Case Slider for Ducati Scrambler 803 '15-'16 | Left Hand Side – Silver

    R&G Engine Case Slider for Ducati Scrambler 803 '15-'16 | Left Hand Side – Silver

    The super good looking brushed aluminum R&G engine case slider was specifically designed for your Scrambler.  This slider is manufactured using abrasion resistant polyethylene for its impact strength and friction resistant properties. When this material hits the pavement, it takes the impact and keeps your vulnerable and valuable engine case up off the ground.  This action prevents cracks and loss of oil.  In a slide, the high strength polyethylene slows down and smooths out a skid prohibiting a cringe worthy grind.  Invest in superb protection and ride home after a spill, instead of watching your motorbike bleed out waiting for a tow.

    You can find the black version of the R&G engine case slider here.

    Learn More
    $79.99

  7. R&G Right Hand Side Engine Case Guard For Honda CRF250L ’13-’16 & CRF250M ’13-’16 | Black

    R&G Right Hand Side Engine Case Guard For Honda CRF250L ’13-’16 & CRF250M ’13-’16 | Black

    Protect you Honda CRF250L or M with the R&G right hand side engine case guard.  It is constructed out of a durable 3mm aluminum sheet, and is powdercoated black for a high-quality finish.  Its mission is to guard your engine case, wiring and other critical components from debris kicked up by your wheel and frontal attacks when taking a jaunt off the beaten path.  Grab one of these little but mighty guards crafted by R&G and safeguard your investment.

    The matching bash plate RG.BP0007.BK is available here.

    Learn More
    $79.99

  8. R&G Left Hand Side Engine Case Guard For Honda CRF250L ’13-’16 & CRF250M ’13-’16 | Black

    R&G Left Hand Side Engine Case Guard For Honda CRF250L ’13-’16 & CRF250M ’13-’16 | Black

    Defend your vulnerable engine case with the R&G left hand side engine case guard.  Wiring and other crucial components will be protected from frontal attacks on the trail or debris kicked up by the wheel.  This guard is specifically designed to fit the left hand side of the Honda CRF250L or M.  This engine case guard is manufactured out of a durable 3mm aluminum sheet, and powdercoated black to ensure a long lasting and high-quality finish.  Invest in this small but mighty piece of defense, and save yourself from some expensive repairs.

    The matching bash plate shown in image (RG.BP0007.BK) is available here.

    Learn More
    $79.99

Grid List

per page

Items 71 to 78 of 78 total

Page:
  1. 1
  2. 2
  3. 3