x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Engine Case Covers

Engine Case Covers

Engine Case Covers

Motorcycle Engine Case Covers

Protect the vulnerable motor of your motorcycle from pavement grinding or impact damage during a slide or crash with engine case covers available from Twisted Throttle. These protector guards will help prevent costly repairs to your engine’s vulnerable clutch, alternator, water pump or cylinder head covers. With a huge assortment of street or track engine protection such as polypropylene case covers and sliders, carbon fiber engine case sliders and cylinder head guards, from trusted brands like R&G and SW-MOTECH, Twisted Throttle will keep you riding.

FILTER OPTIONS

Grid List

per page

Items 36 to 70 of 130 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. R&G Race Series Engine Case Cover Kit for Ninja 650 & Z650 | 2 Piece

    R&G Race Series Engine Case Cover Kit for Kawasaki Ninja 650 '17 & Z650 '17 | 2 Piece

    The R&G race series engine case cover kit for Kawasaki Ninja 650' 17 & Z650 '17 provides critical protection for the vulnerable engine cases in the event of a low side spill or tip over. Robust 4mm Polypropylene is naturally impact absorbing and abrasion resistant to defend against cracking and wear through of fragile metals when your motorcycle goes down. The beefed-up race series covers enhance protection a step further than the standard covers using replaceable slider pucks at the impact face for even greater wear resistance. After a small slide, just the slider puck itself can be replaced so you can head back out on the track without missing a session. These essential case covers are highly recommended for track day enthusiasts but street riders can also benefit from the added protection.

    Installation is simple without the need for modifications, simply bolt on using existing mounting holes and there is no chance of spilling oil or need to replace any gaskets. This essential kit safeguards the entire clutch cover, timing case and stator case from top to bottom. Relied on by British Super Bike race teams and approved by the AMA as proper safety equipment that reduces the risk of damage to your motorcycle while also reducing the risk spilling oil on the track. Invest in serious protection for the heart of your Kawasaki with the race series engine case cover kit from the protection experts at R&G!

    Learn More
    $172.92

  2. R&G Engine Case Covers for Ducati XDiavel & XDiavel S - right cover

    R&G Engine Case Covers for Ducati XDiavel & XDiavel S '16-'17 | 2 Piece Kit

    The R&G engine case covers for Ducati XDiavel & XDiavel S 2 piece kit significantly enhance protection to reduce damage during a tip over, fall or slide. Robust 4 mm thick polypropylene bolts directly to the original equipment with no need to replace gaskets or lose a drop of oil. These essential case covers absorb energy during an impact with the ground to minimize the chance of cracking while also resisting abrasion to prevent wear through during a slide. No drilling, cutting or any other modifications are necessary and replacement hardware is provided. Invest in proper protection for the heart of your Ducati with engine case covers from R&G! Learn More
    $143.71

  3. R&G Race Series Engine Case Cover for Ducati 1299 Panigale / S '15-'16 | LHS - Stator Case

    R&G Race Series Engine Case Cover for Ducati 1199 Panigale '12-'14 & 1299 Panigale / S '15-'17 | LHS - Stator Case

    The R&G race series engine case cover for Ducati 1199 Panigale & 1299 Panigale / S provides protection for the entire stator case from a tip over, fall or slide. Robust 4 mm polypropylene construction absorbs impacts while resisting abrasion and mounts directly over the factory unit without the need to change gaskets or spill a drop of oil. This enhanced race series cover features a replaceable High Density Polyethylene slider (the same material used in all R&G axle & frame sliders) for a greater level of security to safeguard the heart of your Panigale. Installation is simple as only a few of the original bolts need to be removed for fitment and extended replacement hardware is included in the kit. Invest in proper protection for your beautiful Italian supermodel and install this race series engine case cover from R&G! Learn More
    $104.06

  4. R&G Engine Case Slider for Suzuki SV650 '17 - left side

    R&G Engine Case Slider for Suzuki SV650 '17 | LHS - Stator

    The R&G engine case slider for Suzuki SV650 '17 provides protection for the left side stator case in the event of a fall or slide. CNC machined High Density Polyethylene is impact absorbing and abrasion resistant to keep the vulnerable motor from getting rashed on the pavement. This essential slider is a great investment and could save you hundreds of dollars in expensive repairs. Installation is easy and does not require any oil loss, gasket changes or other modifications. Protect your SV650 and install an engine case slider from the protection experts at R&G! Learn More
    $47.07

  5. R&G Engine Case Covers for Ducati 959 Panigale

    R&G Engine Case Covers for Ducati 959 Panigale '16-'17 | 2 Piece Kit

    The R&G engine case covers for Ducati 959 Panigale - 2 piece kit protects the vulnerable sections of the motor to significantly reduce the risk of damage in a fall or slide. Robust 4mm polypropylene is utilized for its excellent abrasion resistance and impact absorption. The design of these low profile case covers maximizes cornering clearance and lean angles. Installation is simple and only requires removal of just a few bolts so each unit can go over the factory equipment without the need to replace gaskets or lose any oil. Don't let your bank account take the hit when your Panigale goes down, invest in a set of R&G engine case covers!

    Learn More
    $190.79

  6. SW-MOTECH Engine Case Sliders for Yamaha FZ-10

    SW-MOTECH Engine Case Sliders for Yamaha FZ-10 '17 | 2 Piece Kit

    The SW-MOTECH engine case sliders for Yamaha FZ-10 '17 - 2 piece kit is designed to provide impact and abrasion protection in the event of a tip over, fall or slide. Sturdy CNC machined aluminum construction mounts directly over the factory equipment utilizing extended hardware in the existing bolt holes. These essential sliders will take the hit, keeping your expensive engine cases off the ground to prevent cracking, wearing through and even causing a loss of oil or dirt contamination into the motor. German engineering and design ensure a precision fit while also finished in an attractive hard anodized silver and black. Protect the heart of your FZ-10 with the engine case sliders from the protection experts at SW-MOTECH! Learn More
    $163.95

  7. R&G Engine Case Cover for Aprilia RSV4 '09-'16, Tuono V4 '11-'14 &  Tuono V4 '15-'16 | LHS, Race Version

    R&G Engine Case Cover for Aprilia RSV4 '09-'16, Tuono V4 '11-'14 & Tuono V4 '15-'16 | LHS, Race Version

    AMA Racing Approved

    Protect your engine from debris and damage with an R&G engine case cover. Fabricated from 4mm thick polypropylene, the engine case cover will protect the engine case against impact and abrasion damage during a tip-over, fall or slide.

    What makes the race series special? It was designed in collaboration with high level British Superbike race teams and crash tested in BSB level racing events to ensure that the covers meet or exceed all required standards for case protection. You can be confident in the protection this case cover offers whether you're racing or aggressively taking corners on your way to your mom's birthday party.

    3D scanning technology ensures a product that fits perfectly and looks great, and hey, they even threw in longer bolts. Everything you need to install is in the box. If only everything were this simple.

    Keep your engine case scuff and damage free with the race edition engine case cover from R&G.

    Learn More
    $105.30

  8. R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R | LHS

    R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R '17 | LHS

    The R&G engine case slider for Suzuki GSX-R1000 & GSX-R1000R '17 | LHS provides critical protection for the vulnerable lower edge of the OEM stator case in the event of a fall or slide. High Density Polyethylene is impact absorbing and abrasion resistant to safeguard against striking the pavement and "road rash" or wear through. This clever slider is excellent insurance for your motorcycle and highly recommended on the street to reduce the risk of damage and expensive repairs. Without proper protection, even a light tip over or low speed slide can cause a fracture or oil leak, don't leave your motor exposed. Modifications are not necessary and installation is simple with the use of extended mounting bolts. Keep the heart of your GSX-R safe and install an engine case slider from R&G! Learn More
    $57.63

  9. R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R

    R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R '17 | RHS

    The R&G engine case slider for Suzuki GSX-R1000 & GSX-R1000 '17 | RHS defends the factory original clutch case cover from damage that can occur during a fall or slide. Abrasion resistant and impact absorbing High Density Polyethylene (HDPE) is used as a buffer between the cover and the road to prevent wear through and cracks that can lead to dangerous oil loss. This protective case slider mounts to the lower edge utilizing factory original holes without the need to drill, cut or perform any other modifications. Highly recommended for all motorcycles as a relatively inexpensive investment that could prevent an expensive repair bill even after a small slide. Keep the heart of your GSX-R safe and install an engine case slider from the protection experts at R&G! Learn More
    $64.04

  10. R&G Race Series Engine Case Cover Kit For Triumph Daytona 675, Street Triple & Street Triple R | RHS

    R&G Race Series Engine Case Cover Kit For Triumph Daytona 675 '13-'16, Street Triple & Street Triple R '13-'17 | 2 Piece Kit

    The R&G Race Series engine case cover kit for Triumph Daytona 675, Street Triple & Street Triple R is designed to provide the highest level of protection for the expensive OEM cases in the event of a fall or spill. Hearty 4mm Polypropylene yields exceptional impact absorption and abrasion resistance. This premium Race Series case cover kit beefs up the armored performance with the addition of replaceable slider pucks at the impact face for even greater prevention of wear through. After a fall or slide, just the slider puck itself can be replaced to restore full protective capabilities in only a few minutes. The Race Series cover kit is strongly advised for track day warriors and street riders as well since this somewhat inexpensive investment can save some serious money versus replacement of the costly magnesium case covers.

    Mounting is painless as the original bolt holes can be reused with the provided replacement hardware without the need to perform any modifications. The R&G covers fit directly over the originals without the need to replace any gaskets or even spill a drop of oil. Total installation time is less than 5 minutes. Install the R&G Race Series engine case cover kit and ride into the sunset with confidence knowing your Daytona 675 or Street Triple/R is securely protected!

    Learn More
    $179.33

  11. R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2 '17 | Left Side

    R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2 '17 | Left Side

    The R&G Race Series engine case cover for Honda CBR1000RR /SP/SP2 '17 | left side provides a superior level of protection in the event of a fall, slide or crash. Robust 4mm Polypropylene construction delivers excellent impact absorption and abrasion resistance. The top shelf Race Series case cover ups the ante with a replaceable slider puck at the impact face to decrease the risk of wear through. After a small spill the slider puck itself can be replaced to restore maximum protection without missing more than a few minutes of riding. The Race Series cover is highly recommended for track day enthusiasts and street riders alike as a relatively small investment that can save some serious cash vs. replacing the OEM magnesium case covers.

    Fitment is simple as the factory bolt holes are utilized with supplied replacement hardware which requires no drilling or any other permanent modifications. Simply mount the R&G cover over the original unit without the need to spill a drop of oil or replace the gasket. A matching right side is available separately or save some cash and purchase both at the same time with the 2 piece kit. Keep your CBR safe with the very best protection available and install the Race Series engine case cover from the preservation experts at R&G!

    Learn More
    $102.47

  12. R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2 '17 | Right Side

    R&G Race Series Engine Case Cover for Honda CBR1000RR /SP/SP2 '17 | Right Side

    The R&G Race Series engine case cover for Honda CBR1000RR /SP/SP2 '17 | right side provides the ultimate level of protection in the event of a tip over, or low side slide. Stout 4mm Polypropylene construction produces exceptional impact absorption and abrasion resistance. The high caliber Race Series case cover takes the defensive performance a step further with the addition of a replaceable slider puck at the impact face to provide even greater wear resistance. After a small incident, just the slider puck itself can be replaced in minutes to restore full protection. The Race Series cover is strongly recommended for track day enthusiasts and street riders alike as a relatively small investment that can save some serious cash vs. replacement of the expensive OEM case covers.

    Installation is easy as the factory bolt holes are utilized with extended replacement hardware which does not require drilling or any other permanent modifications. The R&G cover fits over the original without spilling a drop of oil or replacing the gasket. A matching left side is also available or save some cash by purchasing both at the same time with the 2 piece kit. Preserve your beautiful CBR with first-rate protection and install the Race Series engine case cover from the motorcycle protection experts at R&G!

    Learn More
    $102.47

  13. R&G Race Series Engine Case Cover Kit for Honda CBR1000RR /SP/SP2 '17 | 2 Piece

    R&G Race Series Engine Case Cover Kit for Honda CBR1000RR /SP/SP2 '17 | 2 Piece

    The R&G Race Series engine case cover kit for Honda CBR1000RR /SP/SP2 '17 | 2 piece is designed to provide the highest level of protection for the expensive OEM cases in the event of a fall or spill. Hearty 4mm Polypropylene yields exceptional impact absorption and abrasion resistance. These premium Race Series case covers beef up the armored performance with the addition of replaceable slider pucks at the impact face for even greater prevention of wear through. After a fall or slide, just the slider puck itself can be replaced to restore full protective capabilities in only a few minutes. The Race Series cover kit is strongly advised for track day warriors and street riders as well since this somewhat inexpensive investment can save some serious money versus replacement of the costly magnesium case covers.

    Mounting is painless as the original bolt holes can be reused with the provided replacement hardware without the need to perform any modifications. The R&G covers fit directly over the originals without the need to replace any gaskets or even spill a drop of oil. Total installation time is less than 5 minutes. Install the R&G Race Series engine case cover kit and ride into the sunset with confidence knowing your CBR is securely protected!

    Learn More
    $185.73

  14. R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R | 2 Piece

    R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R '17 | 2 Piece

    The R&G engine case cover kit for GSX-R1000 & GSX-R1000R '17 | 2 piece provides complete protection for the vulnerable clutch and stator cover to reduce the risk of damage in the event of a fall or slide. Robust Polypropylene construction adds minimal thickness (4mm) so lean angles are not compromised while providing impact absorption and abrasion resistance. These valuable case covers mount directly over the factory clutch and stator cover without replacing any gaskets or even losing a single drop of oil. High quality replacement hardware makes use of the factory bolt holes with absolutely no drilling or any other modifications. 

    This kit is highly recommended as an investment for every motorcycle used on the track or the street, especially with the price tag of an OEM replacement cover or an engine rebuild. Even a small spill could cause a wear through, loss of oil or debris contamination that can result in catastrophic motor failure. Ride on in confidence knowing your GSXR is properly protected with the engine case cover kit from the preservation specialists at R&G!

    Learn More
    $172.92

  15. R&G Race Series Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R

    R&G Race Series Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R '17 | Left Side

    The R&G Race Series engine case cover for Suzuki GSX-R1000 & GSX-R1000R '17 | left side provides top notch protection for the original stator cover in the event of a fall or slide. A sleek low-profile design adds minimal thickness (4mm) to retain maximum lean angle with robust Polypropylene construction for excellent abrasion resistance and impact absorption. This premium Race Series engine case cover increases the level of performance by adding a replaceable High Density Polyethylene (HDPE) slider at the impact face to combat wear through for a reduced risk of oil loss and debris contamination which can destroy your motor. The slider can also be swapped out after a small spill to restore full protection in only minutes. 

    Consider the cost of a replacement Suzuki case cover or an engine rebuild and this essential piece of equipment is an excellent investment for any road or track bound motorcycle. Installation is simple without the need to replace the gasket or lose a single drop of oil. This race series cover mounts directly over the OEM unit and secures to the factory mounting locations with the supplied replacement hardware. No drilling or any other permanent modifications are necessary. Give your GSX-R the best advantage to survive an incident and install the Race Series engine case cover from the protection experts at R&G!

    Learn More
    $102.47

  16. R&G Race Series Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R | Right Side

    R&G Race Series Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R '17 | Right Side

    The R&G Race Series engine case cover for Suzuki GSX-R1000 & GSX-R1000R '17 | right side delivers premium protection for the original clutch cover significantly reducing the risk of damage during a fall or slide. High strength Polypropylene is constructed with a low profile for exceptional abrasion resistance and impact absorption that doesn't sacrifice lean angle or cornering clearances. The top shelf Race Series case cover enhances the level of defense by adding a replaceable High Density Polyethylene (HDPE) slider at the impact face. This additional abrasion resistant material provides greater wear through performance to minimize the risk of oil loss and debris contamination which can easily ruin your motor. After a small slide the puck itself can be replaced to restore full protection capabilities.

    Considering the cost of a replacement Suzuki clutch cover or an engine rebuild and this valuable piece of equipment is an outstanding investment for every road or track bound motorcycle. Installation is easy without the need to replace gaskets or lose a single drop of oil. The cover fits directly over the OEM unit and utilizes the factory bolt holes with extended hardware included in the kit. No drilling or any other permanent modifications required. Dress your GSX-R with the best protection available and install the Race Series engine case cover from the preservation professionals at R&G!

    Learn More
    $102.47

  17. R&G Engine Case Cover Kit for Ducati Panigale 1199 '12-'14, & Panigale 1299 '15 | 2 Piece Kit

    R&G Engine Case Cover Kit for Ducati Panigale 1199 '12-'14 & Panigale 1299 '15-'17 | 2 Piece Kit

    The R&G Engine Case Covers bolt over the OEM cases to protect them from impact and abrasion that could break or wear a hole in the event of a tip over, slide or crash. 4 mm Polypropylene safeguards the motor from grinding down on the pavement that could cause loss of oil or contamination from debris. This sturdy case kit could make the difference between riding home after a spill or having to replace expensive motor components. Invest in proper protection for your Panigale with R&G! Learn More
    $190.79

  18. R&G Racing Series Engine Case Cover Kit for Ducati Panigale 899 '14-'15 | 2 Piece Kit

    R&G Race Series Engine Case Cover Kit for Ducati Panigale 899 '14-'15 | 2 Piece Kit

    AMA Racing Approved

    The R&G Race Series Engine Case Cover Kit is intended to protect the vulnerable exposed sides of the motor in the event of a slide or crash. Vacuum-formed 4 mm thick polypropylene is armor for your engine absorbing impacts and resisting wear with replaceable slider pucks that can be swiftly replaced after a small spill to get you back on the road/track without delay. These case covers simply install over the OEM engine cases using the included replacement hardware without the need to replace gaskets or change fluids. Use the R&G Frame Sliders, Fork Protectors, and Swingarm Sliders to ensure your Italian beauty is completely protected!

    To add even more glorious beauty and functional armor your steed, check out the R&G Kevlar reinforced Carbon Fiber Tank Sliders & Tail Sliders.

    Learn More
    $190.79

  19. R&G Racing Series Engine Case Cover for Ducati Panigale 899 '14-'15 | Clutch

    R&G Race Series Engine Case Cover for Ducati Panigale 899 '14-'15 | Clutch

    AMA Racing Approved

    The R&G Racing Series Engine Case Cover is intended to protect the vulnerable exposed clutch cover from damage in the event of a slide or crash. Rugged Vacuum-formed polypropylene is 4 mm thick to absorb impacts and resist wear while a replaceable slider puck ensures even greater shock and wear resistance. The slider puck can be quickly replaced after a small spill to get you back on the road/track without replacing the whole unit. This case cover is simple and easy to install over the OEM engine case using the included replacement hardware without the need to replace gaskets or change fluids. Use the R&G Frame SlidersFork Protectors, and Swingarm Sliders to ensure your beautiful Italian superbike is completely protected.

    Learn More
    $104.06

  20. R&G Race Series Engine Case Cover for Aprilia RSV4 '09-'14 & Tuono '11-15 | Clutch (Photo for display purposes, may not be model spcecific)

    R&G Race Series Engine Case Cover for Aprilia RSV4 '09-'14 & Tuono '11-16 | Clutch

    AMA Racing Approved

    The R&G Race Series Engine Case Cover bolts over the OEM Clutch cover to protect it from impact and abrasion in the event of a tip over, slide or crash. Sturdy 4 mm thick polypropylene prevents the motor from being ground down so the bike doesn't suffer loss of oil or contamination from debris. A replaceable slider puck on the Race version of this protective case cover increases the amount of material to wear through and can be replaced quickly and easily without replacing the entire cover so you can get back on the road or track. Save yourself thousands in possible repairs and invest in proper protection for your Aprilia with R&G!

    Learn More
    $105.30

  21. Plus Protection Package for BMW F800GS Adventure

    Plus Motorcycle Protection Package for BMW F800GS Adventure '14-'16

    Our experts at Twisted Throttle have put together this Plus Motorcycle Protection Package for the 2014-2016 BMW F800GS Adventure to provide a higher level of protection than our standard protection package. Whether you are exploring the backwoods or commuting daily, this package will provide protection for your bike from everyday mishaps that could either leave you stranded or with costly repairs. With Barkbusters lever protection handguards; SW-MOTECH crash bars, skid plate, rear brake master cylinder guard, rear axle swingarm slider kit, front axle slider kit, headlight guard and sidestand foot enlarger; as well as R&G left and right side engine case cover kit, your motorcycle will be covered from headlight to sidestand. Ride your ride to your potential with the insurance provided by our Plus Motorcycle Protection Package. Learn More

    From: $36.99

    To: $974.78

  22. R&G Racing Engine Case Cover Kit (2 pc) For Ducat Multistrada 1200 & Multistrada 1200S '15

    R&G Engine Case Cover Kit (2pc) For Ducati Multistrada 1200 DVT & 1200S DVT '15-'17

    With the addition of the R&G Engine Case Cover Kit you will giving your bikes exposed and therefore vulnerable clutch and waterpump some well deserved protection. Learn More
    $143.71

  23. R&G Engine Case Cover Kit for Ducati Panigale 899 '14-'15 | Left & Right Side

    R&G Engine Case Cover Kit for Ducati Panigale 899 '14-'15 | Left & Right Side

    The R&G Engine Case Cover Kit is designed to protect both sides of the Superqudro engine from impact and abrasion during a fall, drop or slide. Sturdy 4 mm Polypropylene bolts directly over the entire factory case cover (top to bottom) to shield it from damage and replacing gaskets or engine oil is not necessary. This kit is a great investment when you think of what can happen to your beautiful Italian engine against the pavement unprotected. Save yourself from a huge repair bill and possibly a trashed motor and protect your Panigale with R&G. Learn More
    $178.40

  24. R&G Engine Case Cover Kit for Triumph Tiger 800 XR '15-'17, Tiger XRT '16-'17, Tiger 800 XRX '15-'17 Tiger 800 XC '15-'17, Tiger 800 XCA '15-'17 & Tiger 800 XCX '15-'17 | 2 Piece Kit

    R&G Engine Case Cover Kit for Triumph Tiger 800 XR '15-'17, Tiger XRT '16-'17, Tiger 800 XRX '15-'17 Tiger 800 XC '15-'17, Tiger 800 XCA '15-'17 & Tiger 800 XCX '15-'17 | 2 Piece Kit

    Available as a two-piece system, this R&G Engine Case Cover Kit protects both the left and right hand casings on your bike. Crafted from lightweight and robust 4mm polyproylene, this setup offers reliable protection during a drop, slide or spill. This kit is designed to coordinate with the versatile and extensive line of R&G crash protectors seamlessly. Each black engine case cover kit includes (2) covers to protect the most valuable components on your motorcycle, and they do it with style! Don't shell out needless dough to repair your motor! 

    Learn More
    $141.23

  25. Plus Protection Package for BMW F800GS '13-'16

    Plus Motorcycle Protection Package for BMW F800GS '13-'16

    Our experts here at Twisted Throttle have assembled this Plus Motorcycle Protection Package for your 2013-2017 BMW F800GS to provide a higher level of protection than our standard protection package. Whether you are commuting daily or exploring the backwoods, this package will provide protection for your bike from everyday mishaps that could either leave you with costly repairs or stranded. With SW-MOTECH crash bars, skid plate, rear brake master cylinder guard, rear axle swingarm slider kit, front axle slider kit, headlight guard and sidestand foot enlarger; Barkbusters lever protection handguards; as well as R&G left and right side engine case cover kit, your motorcycle will be covered from headlight to sidestand. Ride your ride to your potential with the insurance provided by our Plus Motorcycle Protection Package. Learn More

    From: $36.99

    To: $1,001.78

  26. Plus Protection Package for BMW F800GS '09-'12

    Plus Motorcycle Protection Package for BMW F800GS '09-'12

    This Plus Motorcycle Protection Package for the BMW F800GS ’09-’12 has been put together by our experts here at Twisted Throttle to provide a higher level of protection than our standard protection package. With SW-MOTECH crash bars, skid plate, rear brake master cylinder guard, rear axle swingarm slider kit, front axle slider kit, headlight guard and sidestand foot enlarger; Barkbusters lever protection handguards; as well as R&G left and right side engine case cover kit, your motorcycle will be covered from headlight to sidestand. Whether you are commuting daily or exploring the backwoods, this package will provide protection for your bike from everyday mishaps that could either leave you with costly repairs or stranded. Ride your ride to your potential with the insurance provided by our Plus Motorcycle Protection Package. Learn More

    From: $36.99

    To: $989.78

  27. R&G Engine Case Cover Kit For Ducati Monster 1200R '16-'17 | 2 Piece Kit

    R&G Engine Case Cover Kit For Ducati Monster 1200R '16-'17 | 2 Piece Kit

    If you’re looking for high quality engine case protection for your motorcycle that also looks good then grab the R&G engine case cover kit.  This kit includes the left hand side (RG.ECC0117BK) and the right hand side (RG.ECC0211BK) engine case covers.  These covers are fabricated using vacuum formed Polypropylene for durable protection that has an added benefit of actually helping slow down your Monster 1200R in the event of a skid!  The R&G engine case cover kit was designed to easily install directly over your OEM engine cases protecting the heart of your ride from abrasion and impact damage.

    Learn More
    $148.58 $148.58

  28. Plus Motorcycle Protection Package For BMW R1200GS Adventure '11-'13

    Plus Motorcycle Protection Package for BMW R1200GS Adventure '11-'13

    Toughen up your BMW R1200GS Adventure ’11-’13 with the Plus Motorcycle Protection Package, put together by the specialists at Twisted Throttle. With heavy duty but light weight components such as Barkbusters handguards as well as SW-MOTECH skid plate, cylinder head guards, sidestand foot enlarger and rear brake master cylinder guard, your motorcycle will shirk off drops and dings that could otherwise leave you with costly repairs or stranded. Push your adventure further with the insurance that the Plus Motorcycle Protection Package provides. Learn More

    From: $37.95

    To: $660.75

  29. Plus Motorcycle Protection Package For BMW S1000XR

    Plus Motorcycle Protection Package for BMW S1000XR '15-'17

    Provide extra protection for your 2015-2017 BMW S1000XR by installing the Plus Motorcycle Protection Package assembled by the experts at Twisted Throttle. Light weight yet heavy duty components including SW-MOTECH crash bars, engine case sliders, sidestand foot enlarger, rear axle slider kit and front axle slider kit as well as Barkbusters handguards make up this package design specifically for your motorcycle. The Plus Motorcycle Protection Package will keep mishaps from leaving you with costly repairs or stranded so pick one up before your next adventure. Learn More

    From: $59.95

    To: $719.65

  30. Pro Motorcycle Protection Package For BMW S1000XR

    Pro Motorcycle Protection Package for BMW S1000XR '15-'17

    Turn the protection on your 2015-2017 BMW S1000XR up to 11 with the extra protection that the Pro Motorcycle Protection Package delivers. With strong but lightweight products like Barkbusters handguards as well as SW-MOTECH crash bars, engine case slider kit, sidestand foot enlarger, rear axle slider kit, front axle slider kit, frame cap kit and oil cooler guard, your motorcycle will be protected without effecting performance. Designed specifically for your motorcycle and put together by the specialists at Twisted Throttle, the Pro Motorcycle Protection Package will keep everyday mishaps from leaving you stranded or with expensive repair bills. Learn More

    From: $58.95

    To: $895.55

  31. SW-MOTECH Engine Case Slider for Yamaha FJ-09 '15-'16 & XSR900 '16 | Left Side

    SW-MOTECH Engine Case Slider for Yamaha FJ-09 '15-'17, FZ-09 '17 & XSR900 '16-'17 | Stator Cover

    The SW-MOTECH engine case slider for Yamaha FZ-09, FJ-09 & XSR900 stator cover bolts over the original engine case to provide impact and abrasion protection in the event of a fall, slide or crash. Precision CNC machined aluminum is elegantly styled to enhance aesthetics while safeguarding the heart of your motorcycle. This essential case slider is simple to install and does not require removal of the original engine case cover, an oil change or replacement of any gaskets. Extended hardware is included to utilize existing bolt holes. Preserve the vulnerable engine case of your Yamaha with this trick stator case slider from the protection experts at SW-MOTECH! Learn More
    $127.95

  32. R&G Engine Case Cover Kit for Triumph Speed Triple S '16, Speed Triple R '16 & Tiger 1050 Sport '16 | 2 Piece

    R&G Engine Case Cover Kit for Triumph Speed Triple S '16, Speed Triple R '16 & Tiger 1050 Sport '16 | 2 Piece

    The R&G engine case cover kit for Triumph Speed Triple S '16, Speed Triple R '16 & Tiger 1050 Sport '16 - 2 piece adds protection for the vulnerable left and right side engine cases with impact absorbing and abrasion resistant armor. Hearty 4 mm thick polypropylene is molded to fit directly over the OEM motor casing to preserve it from scrapes or breakage that could cause wear through and oil loss. If you go down these essential engine case covers could save you from having to replace your expensive factory cases and an even more expensive rebuild if pieces of the cover break off in the motor. Installation is simple and does not require replacement of gaskets or loss of fluids. Invest in proper protection for your Triumph with this engine case cover kit from R&G! Learn More
    $156.10

  33. Plus Motorcycle Protection Package For BMW R1200GS

    Plus Motorcycle Protection Package for BMW R1200GS '10-'12

    Give your motorcycle the protection it deserves with the Plus Motorcycle Protection Package designed specifically for the BMW R1200GS ’10-’12. Carefully selected by the experienced crew at Twisted Throttle, this package includes strong but lightweight products such as Barkbusters handguards, SW-MOTECH upper and lower crash bars, skid plate, centerstand skid plate extension, cylinder head guards, sidestand foot enlarger, rear brake master cylinder guard and swingarm slider kit. Keep simple mishaps on the trail or street from ending your ride or leaving you with hefty repair bills by installing the Plus Motorcycle Protection Package before your next two wheel excursion. Learn More

    From: $37.95

    To: $1,424.50

  34. R&G Engine Case Cover Kit For Ducati Monster 821 ’14-’16 | 2 Piece Kit - Left Hand Side Engine Case Cover Rg.ECC0152BK

    R&G Engine Case Cover Kit For Ducati Monster 821 '14-'17 | 2 Piece Kit

    Specifically crafted for the Ducati Monster 821, this R&G engine case cover kit bolts directly over the OEM engine cases for impact and abrasion protection in the event of a tip-over, skid or crash. This kit contains both the LHS and RHS covers. These engine case covers are manufactured using vacuum formed rugged 4mm thick Polypropylene, which stands up to friction generated heat and will actually slow down your motorcycle in the event of a skid. Breathe a little easier by knowing your Monster (and wallet) is protected with R&G.

    Learn More
    $143.71

  35. Plus Protection Package for BMW F700GS

    Plus Motorcycle Protection Package for BMW F700GS '13-'16

    The Plus Motorcycle Protection Package for the BMW F700GS '13-'16, with components picked out by our experts here at Twisted Throttle, will provide a higher level of protection than our standard protection package. With Barkbusters handguards; SW-Motech crash bars, skid plate, rear master cylinder guard, rear axle swingarm slider kit, headlight guard and sidestand foot enlarger; as well as R&G left and right side engine case cover kit, your motorcycle will be protected from headlight to sidestand. Whether you are commuting to work or exploring the backwoods, this package will provide protection for your bike from everyday mishaps that could leave you with costly repairs or stranded. Ride your ride to your potential with the insurance provided by our Plus Motorcycle Protection Package. Learn More

    From: $36.99

    To: $855.84

FILTER OPTIONS

Grid List

per page

Items 36 to 70 of 130 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4