x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Engine Case Covers

Engine Case Covers

Engine Case Covers

Motorcycle Engine Case Covers

Protect the vulnerable motor of your motorcycle from pavement grinding or impact damage during a slide or crash with engine case covers available from Twisted Throttle. These protector guards will help prevent costly repairs to your engine’s vulnerable clutch, alternator, water pump or cylinder head covers. With a huge assortment of street or track engine protection such as polypropylene case covers and sliders, carbon fiber engine case sliders and cylinder head guards, from trusted brands like R&G and SW-MOTECH, Twisted Throttle will keep you riding.

FILTER OPTIONS

Grid List

per page

Items 141 to 175 of 474 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. R&G Engine Case Slider for Kawasaki Ninja 650 & Z650 (Actual Slider may appear slightly different)

    R&G Engine Case Slider for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Right Side

    The R&G engine case slider for Kawasaki Ninja 650 & Z650 | right side protects the motor from impacts and abrasion in the event of a tip over or slide. High Density Polyethylene construction is the same material utilized in the successful frame and axle sliders to keep the vulnerable lower section of the motor from dangerous contact with the pavement. This essential slider mounts over the original engine case and secures to the factory mounting holes of the OEM case cover. Installation should only take a few minutes without drilling, cutting, sanding or any other permanent modifications. Keep the heart of your Kawasaki safe from damage with an engine case slider from the protection professionals at R&G! Learn More
    $58.95

  2. R&G Engine Case Slider for Kawasaki Ninja 650 & Z650 | Left Side

    R&G Engine Case Slider for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Left Side

    The R&G engine case slider for Kawasaki Ninja 650 & Z650 | left side safeguards the motor from contacting the pavement in the event of a tip over or slide. High Density Polyethylene (HDPE) construction is impact and abrasion resistant to prevent cracking or wear through that can lead to costly repairs. HDPE is the same material utilized in the successful frame and axle sliders to keep the vulnerable lower edge safe from road rash during an incident. This protective slider mounts to the factory bolt holes of the OEM case cover. Installation takes only a minute without the need for permanent modifications. Protect the heart of your Kawasaki with an engine case slider from the protection experts at R&G! Learn More
    $58.95

  3. R&G Race Series Engine Case Cover for Ninja 650 & Z650 | Right Side

    R&G Race Series Engine Case Cover for Ninja 650 '17-'18 & Z650 '17-'18 | Right Side

    The R&G race series engine case cover for Kawasaki Ninja 650 & Z650 | right side provides essential protection for the engine case reducing the risk of damage in the event of a tip over or low side slide. Hearty 4mm Polypropylene construction naturally absorbs impacts and is abrasion resistant to prevent breakage and wear through. The upgraded race series engine case cover enhances protection over the standard covers by adding replaceable slider pucks at the impact face. In the event of a small slide, just the slider puck itself can be replaced so you can head back out on the track without missing a session. This case cover is strongly recommended for track day enthusiasts needing an extra level of safety although street riders will benefit as well.

    Modifications are not required for installation, simply bolt on using factory mounting holes without the need to replace gaskets or lose a drop of oil. This right-side engine cover preserves the clutch cover from top to bottom on the throttle side of the motorcycle. Entrusted by British Super Bike race teams and approved by the AMA for reducing the risk of spilled oil on the track and minimizing possible of damage during an incident. Bolt-on the race series engine case cover from R&G and ride in confidence knowing your Kawasaki is protected!

    Learn More
    $102.95

  4. R&G Race Series Engine Case Cover for Ninja 650 & Z650 | Left Side

    R&G Race Series Engine Case Cover for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Left Side

    The R&G race series engine case cover for Kawasaki Ninja 650 & Z650 | left side provides superior protection for the engine case and reduces the risk of damage in the event of a tip over or low side slide. Rugged 4mm Polypropylene construction absorbs impacts and resists abrasion to prevent deterioration and wear through of the original equipment. This top of the line race series engine case cover provides a superior level of protection with the use of a replaceable slider puck at the impact face for even greater resistance to damage over the standard case covers. In the event of a small incident, just the slider puck itself can be replaced to restore maximum protection in only minutes. This case cover is highly recommended for track day enthusiasts seeking the highest level of protection and for street riders looking to safeguard their investment.

    Modifications are not required for fitment, simply bolt on using the original mounting holes without the need to replace a gasket or lose a drop of oil. This left-side engine cover preserves the entire stator cover from top to bottom on the clutch lever side of the motorcycle. Relied upon by British Super Bike race teams and approved by the AMA for reducing the risk of oil spills on the track and minimizing the possibility of damage during an incident. Invest in proper protection for your Kawasaki and install a race series engine case cover from the protection experts at R&G!

    Learn More
    $102.95

  5. R&G Engine Case Cover for Kawasaki Ninja 650 & Z650 | Right Side

    R&G Engine Case Cover for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Right Side

    The R&G engine case cover for Kawasaki Ninja 650 & Z650 | right side offers protection and reduces the risk of damage to the vulnerable and fragile engine case on the throttle side in the event of a tip over or slide. Robust 4mm Polypropylene construction is impact absorbing and abrasion resistant to ensure the integrity of the original equipment isn't compromised so motor oil stays where it belongs; inside the motorcycle. This defensive engine case cover also decreases the risk of getting dirt and debris into the motor which can result in catastrophic engine failure. This wise investment is highly recommended for street riders to prevent expensive repairs, replacement or even to avoid getting stranded after an incident with an inoperable motorcycle.

    100% bolt-on installation means there is no need for permanent modifications. Simply fit the R&G cover over the original clutch cover and secure with the supplied replacement hardware in the factory mounting holes without losing a drop of oil or replacing the gasket. Preserve the heart of your Kawasaki with an engine case cover from the protection professionals at R&G!

    Learn More
    $93.95

  6. R&G Engine Case Cover for Ninja 650 & Z650 | Left Side

    R&G Engine Case Cover for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Left Side

    The R&G engine case cover for Kawasaki Ninja 650 & Z650 | left side provides protection for the vulnerable and exposed section of motor to reduce the risk of damage in the event of a tip over or slide. Strong Polypropylene construction (4mm thick) can absorb impacts and resist abrasions to preserve the integrity of the original equipment so the oil stays inside the motorcycle and not in a puddle on the ground after a fall. This protective engine case cover also minimizes the risk of debris penetrating the OEM cover and contaminating the oil which can result in catastrophic engine failure. For a relatively small investment, you could save yourself from a very expensive repair bill if/when your bike goes down.

    Installation does not require replacement of the gasket or even losing a drop of oil. Simply remove a few bolts (always follow the installation instructions) place the R&G case cover over original stator cover and secure with the supplied replacement hardware in the factory mounting holes. No permanent modifications necessary. Keep your Kawasaki safe with an engine case cover from the protection experts at R&G!

    Learn More
    $93.95

  7. R&G Carbon Kevlar Engine Case Slider for KTM 1050 Adventure ‘15-’17 & 1290 Super Adventure ‘15-’17 | Left Hand Side

    R&G Carbon Kevlar Engine Case Slider for KTM 1290 Super Adventure ‘15-’18 | Left Hand Side

    Protect the motor housing on your motorcycle from damage with an R&G Carbon Kevlar Engine Case Slider for KTM 1290 Super Adventure. With genuine Dupont Kevlar backed carbon fiber, this guard not only looks great, but provides superb insurance against protruding rocks as well as pavement during a low or high speed drop. Help to keep a boulder or a casual spill from ending your adventure with Carbon Kevlar engine case sliders by R&G. Learn More
    $104.95

  8. R&G Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R

    R&G Engine Case Cover for Suzuki GSX-R1000 & GSX-R1000R '17-'18 | LHS Water Pump

    The R&G engine case cover for Suzuki GSX-R1000 & GSX-R1000R | LHS water pump safeguards the vulnerable water pump from damage in the event of a fall or slide. Stout 4mm polypropylene features a low profile design so cornering clearance isn't compromised. This durable case cover is naturally impact absorbing and abrasion resistant so the water pump remains preserved during an incident. Fitment is easy as the factory unit does not need to be removed, therefore no coolant is lost and gaskets remain intact. Invest in proper protection for your GSX-R and install the R&G water pump case cover! Learn More
    $96.95

  9. R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R | 3 Piece

    R&G Engine Case Cover Kit for Suzuki GSX-R1000 & GSX-R1000R '17-'18 | 3 Piece

    The R&G engine case cover kit for Suzuki GSX-R1000 & GSX-R1000R | 3 piece provides impact and abrasion protection for the left hand and right hand side engine cases and water pump in the event of a fall or slide. Stout polypropylene construction is 4mm thick to reduce the risk of damage in an impact and prevent wear through in a low side. These high quality case covers mount directly over the factory covers without the need to lose a drop of fluid or replace gaskets. Drilling or any other modifications are not necessary as a select few of the same bolt holes are utilized.

    When you consider the replacement cost of original Suzuki engine covers and a new water pump, this 3 piece kit is a very wise investment for any track or street going motorcycle. Without this set a small slide could easily compromise the motor causing oil/coolant loss and even worse, cause debris to enter the motor and require a complete rebuild. Don't leave your GSX-R vulnerable to injuries, keep it safe with a 3 piece case cover kit from the preservation professionals at R&G!

    Learn More
    $274.95

  10. R&G Race Series Engine Case Cover Kit for Suzuki GSX-R1000

    R&G Race Series Engine Case Cover Kit for Suzuki GSX-R1000 '17-'18 | 2 Piece

    This R&G Race Series engine case cover kit was developed to meet the standards and needs of both race teams and riders alike. Each unit is crafted from impact absorbing and abrasion resistant polypropylene with a replaceable puck or slider at the point of impact for even greater protection. If a fall does take place, just the "puck" can be replaced allowing the cover to be continually reused! The polypropylene is 4mm thick for strength, durability and sharp aesthetics, these right side covers are easy to install, by simply bolting on over the original engine casing. That's right! No messy adhesives needed for mounting! Ground clearance is not sacrificed with the low profile. Invest in proper protection for the heart and soul of your Suzuki and add a R&G Racing Series engine case cover kit! Learn More
    $197.95

  11. R&G Engine Case Cover Kit for Ducati Multistrada 950 | 2 Piece (Waterpump)

    R&G Engine Case Cover Kit for Ducati Multistrada 950 '17-'18 | 2 Piece

    The R&G engine case cover kit for Ducati Multistrada 950 | 2 piece provides essential protection for the vulnerable exposed sides of the motor in the event of a fall or slide. Impact absorbing and abrasion resistant polypropylene construction is 4mm thick to safeguardthe entire unit from top to bottom. This protective kit defends the left side water pump and the clutch cover on the right side and is highly recommended to prevent expensive repairs or replacement after an incident. Installation does not require any drilling, permanent modifications, gasket replacement or loss of oil. Properly defend the heart of your Multistrada with the 2 piece engine case cover kit from R&G! Learn More
    $157.95

  12. R&G Racing Series Engine Case Cover Kit for KTM RC 390 | 2 Piece

    R&G Race Series Engine Case Cover Kit for KTM RC 390 '17-'18 | 2 Piece

    The R&G Racing Series engine case cover kit for KTM RC 390 | 2 piece adds essential protection to the vulnerable exposed sections of motor in the event of a fall or slide. Robust polypropylene construction is 4mm thick for outstanding abrasion resistance and impact absorption. These top shelf racing series covers up the ante with a replaceable slider puck at the impact face for even greater wear through protection when sliding down the pavement. Installation is very simple without the need for drilling or permanent modifications. Simply bolt the case cover directly over the OEM engine covers with the supplied extended hardware. No need to mess with adhesives, gasket replacement or oil loss. Protect your KTM with the highest level of engine protection and add a set of Racing Series engine case covers from R&G! Learn More
    $178.95

  13. SW-MOTECH Engine Case Sliders for Kawasaki Z900

    SW-MOTECH Engine Case Sliders for Kawasaki Z900 '17-'18 | 2 Piece Kit

    The SW-MOTECH engine case sliders for the Kawasaki Z900 are designed to provide impact and abrasion protection in the event of a tip over, fall or slide. Sturdy CNC machined aluminum construction mounts directly over the factory equipment utilizing extended hardware in the existing bolt holes. These essential sliders will take the hit, keeping your expensive engine cases off the ground to prevent cracking, wearing through and even causing a loss of oil or dirt contamination into the motor. German engineering and design ensure a precision fit while also finished in an attractive hard anodized silver and black. Protect the heart of your Z900 with the engine case sliders from the protection experts at SW-MOTECH! Learn More
    $147.95

  14. R&G Engine Case Cover for Suzuki GSX250R | Left Side

    R&G Engine Case Cover for Suzuki GSX250R '18 | Left Side

    The engine case on the left side (stator cover) of your Suzuki GSX250R is vulnerable to road rash, wear-through and severe engine damage in the event of a tip-over, fall or slide. This R&G engine case cover protects the heart of your motorcycle with abrasion resistant / impact absorbing 4mm thick polypropylene that installs directly over the original unit. Fitment is very simple utilizing existing bolt holes without permanent modifications. Don't let a minor spill leave you stranded miles from home with an expensive repair bill, invest in superior protection with an R&G engine case cover! Learn More
    $93.95

  15. R&G Engine Case Cover for Suzuki GSX250R | Right Side (clutch)

    R&G Engine Case Cover for Suzuki GSX250R '18 | Right Side

    The engine case on the right side (clutch cover) of your Suzuki GSX250R is vulnerable to road rash, wear-through and severe engine damage in the event of a tip-over, fall or slide. This R&G engine case cover protects the heart of your motorcycle with abrasion resistant / impact absorbing 4mm thick polypropylene that installs directly over the original unit. Fitment is very simple utilizing existing bolt holes without permanent modifications. Don't let a minor spill leave you stranded miles from home with an expensive repair bill, invest in superior protection with an R&G engine case cover! Learn More
    $93.95

  16. R&G Engine Case Covers for Suzuki GSX250R | Pair

    R&G Engine Case Covers for Suzuki GSX250R '18 | Pair

    R&G engine case covers provide protection for vulnerable sections of the motor that would strike the road during a fall or slide. Robust polypropylene is molded to fit directly over the original left-side stator cover and right-side clutch cover on your Suzuki GSX250R to safeguard against impacts and abrasions. If left unprotected, a minor spill could cause severe damage including case wear thru, loss of oil or debris inside the engine, all resulting in expensive repairs. Installation is straightforward and simple as the factory bolt holes are utilized with extended hardware, no permanent modifications, no loss of oil and no gasket replacement necessary. Keep your GSX250R safe on the street and track (and save some cash) with a pair of engine case covers from the protection experts at R&G! Learn More
    $168.95

  17. R&G Engine Case Cover for Ducati Panigale V4 | LHS

    R&G Engine Case Cover for Ducati Panigale V4 '18 | LHS

    This R&G engine case cover provides protection for the left side OEM engine case (stator cover) in the event of a fall or slide. Abrasion resistant polypropylene is molded to fit directly over the factory Ducati unit and acts as a 4mm thick, impact absorbing shield of armor. Modifications are not needed as a few of the original mounting holes are utilized with extended hardware. No need to lose a drop of oil or replace any gaskets! Don't leave the heart of your Panigale vulnerable, defend it properly with an engine case cover from the crash protection professionals at R&G!

    Learn More
    $108.95

  18. R&G Engine Case Covers for Ducati Panigale V4 | Pair

    R&G Engine Case Covers for Ducati Panigale V4 '18 | Pair

    The R&G engine case covers provide impact and abrasion protection for the vulnerable sections of the engine on both sides of the Ducati Panigale V4. Hearty polypropylene construction bolts directly over the factory case covers utilizing existing mounting holes. These essential case covers significantly reduce the risk of wear through during a slide, preventing loss of oil and or debris contamination inside of the engine. Drilling, cutting or any other permanent modifications are not necessary for fitment. These case covers are an excellent investment for the street / track especially when you consider the cost of replacement Ducati parts or internal engine repairs. Protect your Panigale V4 properly with a set of engine case covers from the protection experts at R&G! Learn More
    $197.95

  19. R&G Race Version Engine Case Cover for Ducati Panigale V4 | RHS ( Actual product appearance may vary slightly)

    R&G Race Version Engine Case Cover for Ducati Panigale V4 '18 | RHS

    The R&G engine case cover provides superior protection for the vulnerable, exposed section of the motor. This race version offers the highest level of protection with a replaceable slider puck at the impact face for even greater impact absorption and wear resistance over the standard engine case cover. Hearty 4mm thick polypropylene construction is molded to fit perfectly over the right-side clutch case cover, protecting it from top to bottom. Installation is straightforward and simple utilizing the existing mounting holes without the need for modifications, oil loss or gasket replacement. Don't let a minor fall or slide cause severe damage, defend the heart of your Panigale V4 with the race version engine case cover from R&G! Learn More
    $115.95

  20. R&G Slash Cut Engine Case Cover for Kawasaki Ninja 650 & Z650 | Left Side

    R&G Slash Cut Engine Case Cover for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Left Side

    The R&G slash cut engine case cover is a modern design that offers improved aesthetics without compromising protection during a tip-over, fall or slide. Hearty polypropylene is molded to fit directly over the original left side (stator) case cover with a low profile that doesn't sacrifice cornering clearance or lean angle. The vulnerable lower half of the engine case and impact face are protected from directly striking the pavement while the upper half is still visible to provide an enhanced aesthetic. Installation is very straightforward utilizing existing mounting holes with included extended hardware, no loss of oil or gasket replacement necessary. Safeguard the heart of your Kawasaki with a slash cut engine case cover from R&G!

    Learn More
    $102.95

  21. R&G Slash Cut Engine Case Cover for Kawasaki Ninja 650 & Z650 | Right Side

    R&G Slash Cut Engine Case Cover for Kawasaki Ninja 650 '17-'18 & Z650 '17-'18 | Right Side

    The R&G slash cut engine case cover is a modern design that offers improved aesthetics without compromising protection during a fall or slide. Robust polypropylene is molded to fit directly over the OEM clutch case cover with a low profile that doesn't sacrifice cornering clearance or lean angle. The vulnerable lower half of the engine case and impact face are protected from direct contact with the pavement while the upper half is still visible for a more pleasing appearance. Installation is simple utilizing existing mounting holes with extended hardware, no loss of oil or gasket replacement necessary. Invest in top notch protection for your Kawasaki with this slash cut engine case cover from the experts at R&G!

    Learn More
    $102.95

  22. R&G Race Series Engine Case Cover Kit for BMW S1000R, S1000RR & S1000XR | 3 Piece

    R&G Race Series Engine Case Cover Kit for BMW S1000R '17-'18, S1000RR '17-'18 & S1000XR '17-'18 | 3 Piece

    This R&G Race Series engine case cover kit was developed to meet the standards and needs of both race teams and riders alike. Each unit is crafted from impact absorbing and abrasion resistant polypropylene with a replaceable puck or slider at the point of impact for even greater protection. If a fall does take place, just the "puck" can be replaced allowing the cover to be continually reused! The polypropylene is 4mm thick for strength, durability and sharp aesthetics, these right side covers are easy to install, by simply bolting on over the original engine casing. That's right! No messy adhesives needed for mounting! Ground clearance is not sacrificed with the low profile. Invest in proper protection for the heart and soul of your BMW and add a R&G Racing Series engine case cover kit! Learn More
    $259.95

  23. R&G Race Series Engine Case Cover for KTM RC 390 | RHS

    R&G Race Series Engine Case Cover for KTM RC 390 '17-'18 | RHS

    The R&G Race Series engine case cover for KTM RC 390 | RHS dramatically reduces the risk of damage to the OEM engine cover during a fall or slide. Stout 4 mm thick polypropylene construction is abrasion resistant and impact absorbing to help prevent road rash, cracking, or other dangerous destruction. This top-of-the-line case cover takes protection a step further with the addition of a replaceable slider puck at the impact face for even greater wear resistance. The puck can also be replaced after a small spill so you can get back on the road quickly with fully restored protection. Installation is very straightforward using the existing mounting holes and extended hardware, no modifications needed. Invest in superior protection for your RC 390 with the Race Series engine case cover from R&G! Learn More
    $111.95

  24. R&G Engine Case Cover Kit for KTM RC390

    R&G Engine Case Cover Kit for KTM RC 390 '17-'18 | 2 Piece

    The R&G engine case cover kit for KTM RC 390 provides complete protection of the vulnerable engine sides in the event of a fall or slide. Robust 4mm thick polypropylene construction adds minimal thickness with abrasion resistance and impact absorption to prevent direct contact with the pavement. Installation is straight-forward as the original equipment does not need to be removed or modified, simply bolt on utilizing the existing mounting holes. These essential case covers are a very wise investment when you consider the repair and replacement cost of factory original parts or worse; an engine rebuild. If your unprotected motor contacts the ground in a fall it can easily crack or wear through to the point where oil is spilling out and dirt/debris get in. Learn More
    $168.95

  25. R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R | LHS

    R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R '17-'18 | LHS

    The R&G engine case slider for Suzuki GSX-R1000 & GSX-R1000R | LHS provides critical protection for the vulnerable lower edge of the OEM stator case in the event of a fall or slide. High Density Polyethylene is impact absorbing and abrasion resistant to safeguard against striking the pavement and "road rash" or wear through. This clever slider is excellent insurance for your motorcycle and highly recommended on the street to reduce the risk of damage and expensive repairs. Without proper protection, even a light tip over or low speed slide can cause a fracture or oil leak, don't leave your motor exposed. Modifications are not necessary and installation is simple with the use of extended mounting bolts. Keep the heart of your GSX-R safe and install an engine case slider from R&G! Learn More
    $61.95

  26. R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R

    R&G Engine Case Slider for Suzuki GSX-R1000 & GSX-R1000R '17-'18 | RHS

    The R&G engine case slider for Suzuki GSX-R1000 & GSX-R1000 | RHS defends the factory original clutch case cover from damage that can occur during a fall or slide. Abrasion resistant and impact absorbing High Density Polyethylene (HDPE) is used as a buffer between the cover and the road to prevent wear through and cracks that can lead to dangerous oil loss. This protective case slider mounts to the lower edge utilizing factory original holes without the need to drill, cut or perform any other modifications. Highly recommended for all motorcycles as a relatively inexpensive investment that could prevent an expensive repair bill even after a small slide. Keep the heart of your GSX-R safe and install an engine case slider from the protection experts at R&G! Learn More
    $68.95

  27. R&G Race Series Engine Case Cover for BMW S1000R, S1000RR & S1000XR | RHS Clutch

    R&G Race Series Engine Case Cover for BMW S1000R '17-'18, S1000RR '17-'18 & S1000XR '15-'18 | RHS Clutch

    The R&G Race Series engine case cover for BMW S1000R, S1000RR & S1000XR | RHS clutch provides critical protection to reduce the risk of damage in the event of a fall or slide. Sturdy 4mm polypropylene construction is impact absorbing and abrasion resistant to defend against cracks and wear through. This top shelf Race Series engine cover includes a replaceable slider puck at the impact face for even greater slide resistance. The slider puck is made from the same HDPE (High Density Polyethylene) as the successful frame and axle sliders and can be quickly replaced after a small spill to restore full protection. This cover mounts directly over the original BMW clutch cover without the need for modifications, fluid loss, or gasket replacement and utilizes the existing mounting holes with replacement hardware. Highly recommended for track and street use as this relatively small investment can prevent costly repairs, loss of oil and risk of motor failure. Don't leave the heart of your Bavarian beast exposed, protect it with an R&G Race Series engine case cover! Learn More
    $102.95

  28. R&G Engine Case Cover for Suzuki GSX-S750

    R&G Engine Case Cover for Suzuki GSX-S750 '18 | RHS Clutch

    The R&G engine case cover for Suzuki GSX-S750 '18 | RHS clutch defends the original clutch cover from damage in the event of a fall or slide. Sturdy 4mm polypropylene construction maintains a low profile by fitting snugly around the factory unit so cornering clearances aren't compromised. This protective case cover absorbs impacts and resists abrasions so your engine case doesn't wear through and leak engine oil or worse; contaminate the motor with debris. Installation is easy as the factory unit does not need to be removed, therefore no oil is lost and the gasket remains untouched. Defend your GSX-S750 from injury and install a clutch case cover from R&G!

    Learn More
    $102.95

  29. R&G Engine Case Cover Kit for Suzuki GSX-S750 '18 | 3 Piece

    R&G Engine Case Cover Kit for Suzuki GSX-S750 '18 | 3 Piece

    The R&G engine case cover kit for Suzuki GSX-S750 '18 | 3 piece provides impact and abrasion protection for the original clutch cover, stator cover and idle gear cover in the event of a fall or slide. Sturdy polypropylene construction is 4mm thick to significantly reduce the risk of damage in an impact and prevent wear through in a low side. These protective case covers mount directly over the factory Suzuki engine covers without the need to lose a drop of oil or replace gaskets. Permanent modifications are not necessary as original mounting holes are utilized with included extended hardware.

    This 3 piece kit is one of the smartest investments for any track or street going motorcycle especially when you consider the relatively small cost vs. repair or replacement of OEM engine covers. Without this set a small slide could easily compromise the integrity of the motor causing oil loss and even worse; a complete rebuild. Make sure your GSX-S750 is well protected with the 3 piece engine case cover kit from R&G!

    Learn More
    $226.95

  30. GIVI PH5108 Cylinder Head Guards for BMW R1200GS LC

    GIVI PH5108 Cylinder Head Guards for BMW R1200GS LC '13-'16

    The GIVI PH5108 cylinder head guards for BMW R1200GS LC '13-'16 add protection to prevent damage from trail debris or directly contacting the ground in the event of a fall. Robust aluminum construction is strong yet lightweight and hard anodized for a durable and corrosion resistant finish. These attractive guards mount directly to the cylinder head without drilling or any permanent modifications. Sold as a pair. Don't leave your heads exposed, safeguard them with these sharp looking cylinder head guards from GIVI! Learn More
    $199.00 $179.10

  31. R&G Engine Case Cover Kit for Kawasaki Z900

    R&G Engine Case Cover Kit for Kawasaki Z900 '17-'18 | 3 Piece

    The R&G engine case cover kit for Kawasaki Z900 provides complete protection of the vulnerable engine sides in the event of a fall or slide. Robust 4mm thick polypropylene construction adds minimal thickness with abrasion resistance and impact absorption to prevent direct contact with the pavement. Installation is straight-forward as the original equipment does not need to be removed or modified, simply bolt on utilizing the existing mounting holes. These essential case covers are a very wise investment when you consider the repair and replacement cost of factory original parts or worse; an engine rebuild. If your unprotected motor contacts the ground in a fall it can easily crack or wear through to the point where oil is spilling out and dirt/debris get in. Don't leave the heart of your Z900 at risk, protect it with this 3 piece engine case cover kit from R&G! Learn More
    $247.95

  32. R&G Engine Case Cover For Ducati SuperSport '17-'18 | LHS

    R&G Engine Case Cover For Ducati SuperSport '17-'18 | LHS

    The R&G engine case cover for Ducati SuperSport defends the LHS clutch case from damage in the event of a fall or slide. Sturdy 4mm polypropylene construction maintains a low profile by fitting snugly around the factory unit so cornering clearances aren't compromised. This protective case cover absorbs impacts and resists abrasions so your engine case doesn't wear through and leak engine oil or worse; contaminate the motor with debris. Installation is easy as the factory unit does not need to be removed, therefore no oil is lost and the gasket remains untouched. Defend your Ducati SuperSport from injury and install a clutch case cover from R&G!

    Learn More
    $102.95

  33. R&G Engine Case Cover for Ducati Multistrada 950

    R&G Engine Case Cover for Ducati Multistrada 950 '17-'18 | RHS Clutch

    The R&G engine case cover for Ducati Multistrada 950 defends the original clutch cover from damage in the event of a fall or slide. Sturdy 4mm polypropylene construction maintains a low profile by fitting snugly around the factory unit so cornering clearances aren't compromised. This protective case cover absorbs impacts and resists abrasions so your engine case doesn't wear through and leak engine oil or worse; contaminate the motor with debris. Installation is easy as the factory unit does not need to be removed, therefore no oil is lost and the gasket remains untouched.

    Learn More
    $108.95

  34. R&G Engine Case Slider for Honda CBR1000RR /SP/SP2

    R&G Engine Case Slider for Honda CBR1000RR /SP/SP2 '17 | LHS

    Protect the vulnerable lower leading edge of your motor during a fall or slide with the R&G engine case slider for Honda CBR1000RR /SP/SP2 | LHS. Impact absorbing and abrasion resistant HDPE (High Density Polyethylene) is used to prevent direct contact with the pavement and help slow your machine to a controlled stop. This essential case slider is highly recommended to protect the expensive magnesium engine case cover and is a very wise investment considering the replacement cost of the OEM cover. Installation does not require modifications, gasket replacement or even losing a drop of oil. Protect the left side of your CBR with this case slider from R&G! Learn More
    $75.95

  35. R&G Engine Case Cover Kit For Ducati SuperSport

    R&G Engine Case Cover Kit For Ducati SuperSport '17-'18 | 3 Piece Kit

    The R&G engine case cover kit for Ducati SuperSport | 3 piece provides impact and abrasion protection for the original left hand side water pump and both the left hand and right hand side engine cases in the event of a fall or slide. Stout polypropylene construction is 4mm thick to reduce the risk of damage in an impact and prevent wear through in a low side. These high quality case covers mount directly over the factory covers without the need to lose a drop of fluid or replace gaskets. Drilling or any other modifications are not necessary as a select few of the same bolt holes are utilized.

    When you consider the replacement cost of original Ducati engine covers and a new water pump, this 3 piece kit is a very wise investment for any track or street going motorcycle. Without this set a small slide could easily compromise the motor causing oil/coolant loss and even worse, cause debris to enter the motor and require a complete rebuild. Don't leave your SuperSport vulnerable to injuries, keep it safe with a 3 piece case cover kit from the crash protection professionals at R&G!

    Learn More
    $251.95

FILTER OPTIONS

Grid List

per page

Items 141 to 175 of 474 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
Chat with us!