Engine Case Covers

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

The R&G carbon fiber engine case slider for Ducati Panigale 899, Panigale 1199 & Panigale 1299 - Clutch protects the impact area of the vulnerable clutch cover from damage during a tip over, slide or crash. Beautifully woven construction is reinforced with Dupont Kevlar for increased strength and wear resistance. Installation is simple with adhesive silicone (included) to keep a low profile for maximum cornering clearances and lean angles. Keep your Italian supermodel looking its best with a carbon fiber engine case slider from the protection experts at R&G! The R&G Left Side Carbon Engine Case Slider RG.ECS0067.C is available here.

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Series Engine Case Cover has been uniquely developed to suit the needs of reputable race teams and crash tested in skilled events to ensure they meet and exceed all required standards for protection. These protectors include a replaceable puck or slider at the point of impact providing more material to grind through to further enhance the protection offered. The Engine Case Cover makes for an easy, inexpensive fix in the event of a "minor" slide, crash or drop. Only the "puck" needs to be replaced and the actual covering can be reused continually.

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Series Engine Case Cover has been uniquely developed to suit the needs of reputable race teams and crash tested in skilled events to ensure they not only meet but exceed all required standards for protection. These motor guards feature a replaceable puck or slider at the point of impact providing more girth to grind through to further enhance the protective qualities. The Engine Case Cover makes for an easy, inexpensive fix if you were to experience a "minor" slide, crash or drop. Only the "puck" needs to be replaced and the actual covering can be reused time and time again!

Learn More

R&G engine case slider for Triumph Speed Triple '05-'13 This engine protector was designed to fit the left hand side (LHS) case cover. right hand case slider also available here: RG.ECS0021BK Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ...

Learn More

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly.

Learn More

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly.

Learn More

Designed to protect the Boxer valve cover against falls and slides, the SW-MOTECH Cylinder Head Guards are specially adapted to the shape of the valve cover. Interior rubber cushions provide extra protection where it matters most! Included with the cylinder head guards for the BMW R1200 motorcycle series are a pair of protectors, mounting materials & assembly instructions to help with installation of the part. Learn More

R&G engine case slider for Triumph Speed Triple, Tiger 1050 and Tiger 1050 Sport. This engine protector was designed to fit the right-hand side (RHS) case cover. Left hand case slider also available here: RG.ECS0020BK Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ...

Learn More

R&G Engine Case Slider For Benelli 1130 Café Racer '06 - . This engine protector was designed to fit the right hand side (RHS) case cover. Crafted from high density nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The sliders simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ...

Learn More

This engine protector was designed to fit the left hand side (LHS) case cover. Right side engine case slider also available here: RG.ECS0034BK. Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ...

Learn More

Protect your vulnerable and expensive engine case from track or street damage or debris with the R&G Engine Case Cover.

Learn More

This R&G Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

R&G Engine Case Covers

R&G Engine Case Covers are AMA Pro Racing approved.

Learn More

Engine Case Covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Learn More

Protect your vulnerable and expensive crank case from track or street damage or debris with the R&G Engine Case Cover. Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

SW-MOTECH Stator Cover Guard Learn More

Protect your vulnerable and expensive crank case from track or street damage or debris with the R&G Engine Case Cover. Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

R&G Engine Case Covers

R&G Engine Case Covers are AMA Pro Racing approved.

Learn More

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

R&G Engine Case Covers

R&G Engine Case Covers are AMA Pro Racing approved.

Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

Made from thermoplastic and vacuum-formed, this R&G Racing Engine Case Cover is designed to fit the right hand side (RHS) crank case cover. Fabricated from 4mm polypropylene for optimal ground clearance, strength and a slick appearance, they compliment the R&G Crash Protectors perfectly. Less bulky than the heavy guards of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Just remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. This product could potentially save you from having to make expensive repairs in the event of a crash... 

Learn More

The R&G Racing Series Engine Case Cover Kit is intended to protect the vulnerable case covers on both sides of the engine in the event of a slide or crash. Vacuum- formed 4 mm thick polypropylene protects the motor while replaceable slider pucks are located at the impact face for even greater shock and wear resistance. The slider pucks can be swiftly replaced after a small spill to get you back on the road/track without delay. These case covers are very easy to install over the OEM engine cases using the included replacement hardware with no need to replace gaskets or change the oil. Compliment the R&G Frame Sliders, Fork Protectors, and Rear Axle Sliders perfectly for complete protection. This 3 piece kit protects the stator cover, clutch cover, and timing case cover on the Crossplane mill.

Learn More

These engine case sliders for the BMW K1200R, K1200S, K1300R and K1300S models fit neatly and easily to the existing engine case and will provide additional protection in the event of a drop. R&G Racing engine case sliders compliment the R&G Racing crash protectors and the additional range of products that we offer for these bikes Learn More

R&G engine case slider was designed to fit the left hand side (LHS) case cover. Right hand case slider also available here: RG.ECS0002BK Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More

R&G engine case slider for Yamaha YZF R6 '06-'07 This engine protector was designed to fit the right hand side (RHS) case cover. Left hand case slider also available here: RG.ECS0001BK Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More

R&G engine case slider protector was designed to fit the right hand side (RHS) case cover. Crafted from High Density Nylon for strength, durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance, ultra lightweight, matte finish and protecting one of the most vulnerable parts of the machine. These could save you hundreds of dollars in the event of an accident ... Learn More

R&G engine case slider (right hand cylinder) is made from Carbon Kevlar and fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop.

Learn More

The R&G engine case slider (left-hand cylinder) for your BMW S1000RR, HP4, and S1000R fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop. Fitted with the use of a tough silicon sealant (provided with the kit) for secure adhesion. Learn More