Travel Essentials

Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer. Learn More

Also called "The Knuckle Saver". Prevents removal of the $10 of skin you usually loose from your knuckles when you try to install centerstand springs without the proper tools. This tool enables easy installation and removal of centerstand retention springs. Learn More

This base plate bolts permanently to the outside of any flat sided surface, including TraX and Pelican sidecases. The Optional Fuel canister holder will slide into the base plate and lock in place.

Learn More

Fancy electronic gauges are all well and good, but nothing beats the nostalgia and battery-free confidence inspired by a traditional pencil-type tire gauge. Learn More

Awning kit for Redverz Series II Expedition Tent Learn More

Ride longer with extended fuel capacity offered by the RotopaX 1.75 gallon fuel pack. These fuel safe packs will not leak and can be stored in any justification that gets you from here to there. Designed as a modular system to stack and lock to the optional pack mounts or just run a strap through both ends and tie it to the top of your load. Learn More

Hitting the desert or a war-torn nuclear wasteland where water is in short supply? Then RotopaX 1.75 gallon water container (white) is a must have. Designed to quickly lock to your ride and just as easily be removed. Don't leave home for that adventure ride without one. Learn More

Simplify the installation of R&G crash protection that requires 28mm fairing holes. Learn More

You always want to use the right tool for the job and for drilling the tank ring mounting holes in SW-MOTECH Bags-Connection Quick Lock tank bags this is it. Stepped drill bits also make very clean holes in fairings for flush mounted accessories and power ports.

Learn More

The revolutionary Power Plugger device easily installs a mushroom shaped rubber plug into any tubeless tire without removing the tire from the wheel. With a turn of the included hex wrench, the Power Plugger drives the plug into the offending hole. Once the plug is inserted, inflate the tire, and the plug expands under pressure to fill the punctured area. A firm pull on the plug stem with your pliers seats the mushroom head on the inner wall, allowing no air to escape. This technology insures maximum reliability while reducing your downtime in any situation, without the use of messy liquid glues! Does not include CO2 canisters. Learn More

Each of these four threaded steel canisters contains 16 grams of 100% pure high velocity CO2 gas. In just a few seconds, 8-9 lbs. of inflation is discharged into your tire by each canister. The reusable lossless valve adapter allows no leakage and has solid brass fittings. ATVs and pocket bikes will generally use just one canister to fully inflate the tire. On a full-size sport or adventure-touring motorcycle tire, it will generally take all four canisters to reach 24 - 32 lbs. of pressure depending on tire size. This kit is for use on motorcycles, scooters, ATVs, Golf Carts, Lawnmowers, and small utility tires. Learn More

The TL-5 Heavy Duty Tire Lever Set is designed for use on the toughest tire and rim combinations. Made of forged steel, these beefy levers are a full 8" (20.3 cm) long for superior leverage and compact touring accessibility. Specially designed tip engages tire bead so it can be removed with just two levers. Set of two. Ideal for emergency roadside tire repair, and fighting Zombies! Learn More

Ride longer with extended fuel capacity offered by the RotopaX 1 gallon fuel bottle. These fuel safe bottles will not leak and can be stored in any justification that gets you from here to there. Designed as a modular system to stack and lock to the optional pack mounts or just run a strap through both ends and tie it to the top of your load. Learn More

Hitting the desert or a war-torn nuclear wasteland where water is in short supply? Then RotopaX 1 gallon water container (white) is a must have. Designed to quickly lock to your ride and just as easily be removed. Don't leave home for that adventure ride without one. Learn More

Carry extra fuel, oil, water or other vital fluids on the outside of your sidecase with the DrySpec Bottle Mount Kit. Learn More

This cargo net is a strong elasticized bungee net with 6 nylon coated hardened steel hooks. An indispensable accessory for transporting awkward items!
Dimensions:17" x 17" square
Learn More

The new Stop & Go Portable Mini-Air Compressor measures only 4" x 2" x 6" making it possible to be carried on virtually any motorcycle, scooter, or ATV. The built-in gauge allows you to observe the increased pressure with a reading up to 50 psi. Learn More

A compact tool kit with carrying case designed to fit under most motorcycle seats. Dimensions: 4"” x 7" x” 1.25"” Learn More

The only pressure gauge you’ll ever need. Precision measuring up to 199.9 PSI/13.8 Bar in 0.1 PSI/BAR increments Learn More

Have you ever tried making crimped wire connections with a cheap set of $5 crimpers from the automotive store and wondered why half the crimped connectors fall off the wires afterwards? Take solace in the fact that it's not a lack of skill - you've been victimized by a set of crimpers that suck. Learn More

The Tubed Tire Patch Kit includes 6 patches in 3 different sizes, rubber cement and an abrasive pad in a resealable zip-lock bag. Learn More

With its rugged housing, accurate display and inline reading capabilities, the BestRest EZ Air Tire Gauge helps to keep pressure management a breeze on even the most difficult motorcycle adventure. Learn More

SW- Motech Drinking Bottle for thirsty people Learn More

This is the footprint (an under groundsheet layer) for the Redverz Solo Expedition Tent. Learn More

The Motion Pro PBR Chain Tool is a do it all device that will Press, Break and Rivet 520, 525 & 530 motorcycle chains. An all steel body with hardened steel components ensure strength and long life. The tool uses a multipurpose anvil block that is lettered for proper configuration when performing specific functions. Remove chain pins, press master-link plates and rivet hollow and soft nose master link pins with this one tool! Protective plastic storage case houses tool and included components. When it comes time to replace your chain, make sure you have this in your tool box!

Learn More

The Best Rest EZAir Tire Gauge is designed to make tire pressure management as easy as it gets with a self locking 90° brass chuck that is ideal for bikes with limited valve stem clearance. Pound-force per square inch (PSI) and BAR readings are clear and precise on the 1.5" analog dial that displays real time pressure as air is added or removed. The EZAir gauge features an inline valve stem on the gauge body to add air as needed, or to bleed off some using the bleed button all without ever removing it from the wheel valve stem! The case is surrounded by a grippy and comfortable rubber case that also allows the cord to wrap neatly around when not in use. A convenient carry pouch is included for storage when not in use. Learn More

The Best Rest 90 Degree Valve Stem Retrofit kit converts any straight air chuck to a 90° clip on locking unit that makes it easier to manage air on wheels with minimal access space. High quality brass construction with an easy to operate lever locks on and pops off without any air loss. This kit includes an Oediker clamp to mount this retrofit kit to your existing air hose. Learn More

This HEX Code GS-911 Hammerhead Extension Cable allows the user to connect the diagnostic port with this cable to promote easier access for plugging into the GS-911. The 20" lead includes a male connector on one end that connects directly to your bike and a female connector for plugging into the code reader. This extension cable is useful if your port is difficult to access or when collecting real time data while riding your bike.

Learn More

The fuel canister mount allows you to attach a 2-liter fuel bottle safely and securely to your TraX sidecase. This unit requires the ALK.TT.00 Quick-Lock baseplate (Sold Separately). Learn More

Crafted from ultra lightweight aluminum and powder coated for long lasting use, this R&G Adjustable Bottle Cage for Motorcycles is the ideal accessory for the rider on-the-go. 

The cup holder allows the user to have access to a drink canister attached to the motorcycle handlebars, crash bars or accessory rails. With an adjustable fastener, the R&G bottle cage can be configured on almost any bar measuring 7/8" - 1" in diameter. 

Learn More

Repair and inflate a punctured tubeless tire on your motorcycle easily with the Stop & Go Pocket Tire Plugger Kit with CO2 Inflation. Learn More

Repair and inflate a punctured tubeless tire on your motorcycle easily with the Stop & Go Tubeless Puncture Pilot Tire Plugger Kit with 12 Volt Air Compressor Learn More

The Dynaplug Ultralite tire repair tool is designed for all tubeless tires. The compact and light weight size is perfect for motorcyclists. Easy-to-use, neat and clean with no need for "reamers", messy glues or solvents. Learn More

The Dynaplug Pro tire repair tool is designed for all tubeless tires. The compact and light weight size is perfect for motorcyclists. Easy-to-use, neat and clean with no need for "reamers", messy glues or solvents. Learn More