Device Mounts & Cradles

Includes RAM-HOL-GA22U holder for Garmin StreetPilot c530, c550, c580, i2, i3, & i5. Learn More

Bike-specific center mount for BMW R1200RT, R1150RT, and R1100RT. 2.5" shaft length. Height 3.35". Single mounting plate with dimensions 2.25" x 3". Learn More

Includes RAM-HOL-GA32U mount for Garmin Nuvi 220, 500, 510, 550, & Zumo 220. Learn More

This accessory mount uses existing windscreen mounting points to provide a secure, flat mounting surface with an adjustable viewing angle and height. The 8 pre-drilled M6 mounting holes allow easy direct attachment of your motorcycle accessories. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS. Learn More

Includes RAM-HOL-TO7U mount for the TomTom ONE 125, ONE 130 & ONE 130S Custom Cradle Learn More

Utilizing a quick release male to female union, these mounts are absolutely perfect for those who want the most secure, yet rapid release and portable kit possible. Learn More

Includes RAM-HOL-GA30U mount for Garmin Nuvi 8xx series, including Garmin Nuvi 800, 850, 855, 860, 880, & 885T. Learn More

For use with RAP-326 EZY-Mount Quick Release Adapter System. Learn More

Bike-specific RAM mount assembly for the Can-Am Spyder Roadster. Compatible with all RAM mount components. Learn More

Safe, Secure, and Durable Mounts for Your Motorcycle to fit the Garmin Nuvi 710, 750, 755T, 760, 765T, 770, 775T, 780, & 785T Learn More

This quick-release bike-specific electronics mount fits the Moto Guzzi Stelvio 1200. Learn More

The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5” – 1.10” at the following intervals: Learn More

The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball CENTERED. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More

RAM offers a wide variety of motorcycle mounts. A great new addition to this already extensive product line is our new Twist and Tilt base. Made of die cast marine grade aluminum, durability won't be a concern. The patented rubber ball dampens shock and vibration helping to maintain the performance of the mounted device. Simple to use and install, this great little product is compatible with numerous 1" ball mount systems. Designed to be compact and discrete, the Twist and Tilt won't take up a lot of space but will provide a world of mounting possibilities.

Learn More

Designed to hold an XM or GPS antenna magnetically or via screw down attachment, the RAM-344U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units and RAM GPS cradles. Mount your satellite radio receiver or GPS in a RAM cradle and antenna all on a single platform for both ease of installation and use. Learn More

The Powder Coated Marine Grade Aluminum Universal Camera Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate with a centered 1/4'' X 20 thread. The plate adds support to the thread, by allowing the camera to rest on the plate, creating a stable connection with the camera.

Note: The male 1/4'' long, 1/4'' X 20 thread in the middle of the 2.5'' diameter plate will connect to the standard female thread found at the bottom of most still and video cameras. An alternative to this camera mounting system is the Male 1/4'' X 20 Threaded Ball RAM-B-237. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the BMW R1200GS '08-'09 & R1200GS Adventure '08-'13 and will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. This GPS mount connects your device to the top clamps on the original handlebar of the motorcycle. Learn More

Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the Ducati Multistrada 1200/S '10-'15 and will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

Includes all mounting hardware to add two RAM balls to your handlebar's left-side clutch clamp or right-side brake clamp. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the BMW R1200GS '04-'07 and will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

This mount attaches to the windshield mounting bar located above the instrument cockpit on the BMW R1200GS '08-'12. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the BMW K1300GT & K1200GT. It will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

Includes bar mount, 3" extension arm, and camera holder with 1/4-20 threaded stud. Mounts to handlebars and crash bars 0.5" to 1.25" diameter. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. This device mount will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

This electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits all 10 to 12.5mm (0.4 to 0.5 inch) diameter crossbars. Compatible with most handlebar crossbars, including the SW-MOTECH universal handlebar crossbar LST.00.244.100. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the BMW G650X models, KTM 300 EXC '00-'15, 690 Duke 4/R, 690 Enduro, 690 SMC, 950/990 Adventure, 950/990 SM, 950/990 SMR & 990 SMT and will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the Kawasaki Ninja 650R / ER6F / ER6N '09-'11 and will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More

Includes a U-bolt bar mount base, 2" extension arm, and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. Accommodates rails from 0.50" to 1.25" in diameter. Learn More

Keep your iPhone protected, dry, and charged with the Biologic iPhone case. The waterproof Biologic case snaps quickly on and off of the motorcycle and has a touch-sensitive screen that won't slow you down. Includes 2 silicone liners that provide a secure fit and protection to your iPhone 3G, 3Gs, 4, and 4s. Learn More

This electronics mount is outfitted with vibration damped mechanisms. Fits all 16 to 16.5mm (0.65 inch) diameter crossbars. Compatible with the original crossbar on the BMW R1200GS Adventure handlebar. Learn More