Device Mounts & Cradles
SW-MOTECH Universal RAM Ball Mount for M6 & M8 Bolts, 22mm & 28mm (7/8in & 1-1/8in) Handlebars, or 19.05mm & 25.4mm (3/4in & 1in) TubingThe SW-MOTECH Universal Clamp-on Or Stem-mount RAM Ball can be clamped to your handlebars, or the ball can be used on an M6 or M8 thread without the clamp. Learn More$40.95
Designed to hold an XM or GPS antenna magnetically or via screw down attachment, the RAM-344U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units and RAM GPS cradles. Mount your satellite radio receiver or GPS in a RAM cradle and antenna all on a single platform for both ease of installation and use. Learn More$6.29
The Powder Coated Marine Grade Aluminum Universal Camera Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate with a centered 1/4'' X 20 thread. The plate adds support to the thread, by allowing the camera to rest on the plate, creating a stable connection with the camera.
Note: The male 1/4'' long, 1/4'' X 20 thread in the middle of the 2.5'' diameter plate will connect to the standard female thread found at the bottom of most still and video cameras. An alternative to this camera mounting system is the Male 1/4'' X 20 Threaded Ball RAM-B-237. Learn More$10.97
RAM Mounts KNOB3LU knob lock (optional locking replacement for the original thumbscrew in RAM extension arms)This optional RAM locking knob replaces the original thumb screw in RAM extension arms. In the locked position, turning the locking knob will neither tighten not loosen the extension arm screw, preventing unauthorized removal of the RAM arm or cradle from your motorcycle. It keeps honest people honest - it's not crowbar and buzz-saw safe (of course, neither is your motorcycle). Once you set your mount in the location you need, lock it and hide the key. Learn More$23.76
Includes RAM-HOL-GA23U mount for Garmin Nuvi 600, 610, 650, 660, 670, & 680 Learn More$10.91
Designed for the unwaivering adventure rider for use in all weather conditions, this SW-MOTECH Navi Pro Case M features a touch sensitive, transparent screen cover with a fully sealed zipper. Reinforced with shape retaining EVA material in both the front and rear, the unit is capable of withstanding a beating from the elements. The Navi Case Pro comes with velcro straps inside of the interior intended to secure your expensive device. Each cradle is engineered with a plastic base prepared with a hole pattern which coordinates with both SW-MOTECH GPS mounts and RAM mounting systems.
- All weather safe for GPS and Smartphone
- Touch sensitive lid membrane
- Integrated sun shield
- Foam inlay and velcro fastenings
- Splash & water proof zipper
- Zipper garage
- Cable feed-through
- Back and front made of shape retaining EVA
- Base plate compatible to SW-MOTECH GPS mounts and Richter system
- Dimensions: 5.31" x 3.94" x 1.65"
- Window size: 4.53" x 3.15"
- Water resistant Navi Case Pro M
- Please note: GPS mount needed for installation
Includes RAM-B-237 camera mount (without platform) with 1/4" x 20 male threaded stud. Can also be used as a base if threaded into a 1/4-20 hole. Learn More$8.55
This optional connector allows you to attach two RAM extension arms to each other. Learn More$15.91