Electronics & Wiring

Harness the flexibility and intelligence of your BMW motorcycle's CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The CANsmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches including the rotary "WunderWheel" multi controller. No more "tacked on" switches or confounding wire routing. In addition, because the CANsmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories.

The CANsmart's four dedicated circuits are pre-programmed to connect to and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to use right out of the box. Free software (for Mac or PC) allows you to customize these circuits, but the default settings will be right for the vast majority of installations.

The two auxiliary light circuits enable independent adjustment of high and low beam brightness right from the vehicles WunderWheel. It also features a “flash to pass” and “strobe when horn active” setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple two-wire brake light into a “smart brake light” complete with running light, multiple flash pattern, and deceleration activated braking functionality. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.

Want more flexibility? We thought you might. You can set any of the four circuits to “Simple Circuit” Mode, which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. The electronic fuse is the only active setting so you can properly fuse your accessory.

Learn More

LOUD! Stylish! Rugged!

Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

Learn More

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough, be heard with the SoundBomb Mini.

Learn More

The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow the powerful horn to be mounted separately from the compressor for the most efficient use of space. The lightweight components can be securely mounted with cable ties. For maximum safety the compact compressor instantly supplies air to the trumpet by pressing the factory horn button. An upgraded  Plug-N-Play Wiring Kit is highly recommended and simple to connect. Significantly improve your safety and visibility with the SoundBomb split dual tone air horn from DENALI!

Learn More

The DENALI L bracket accessory mount 2.5" black is great for mounting various accessories to your motorcycle. High strength stamped steel is 1" wide, 3mm in thickness and two and a half inches in length. This useful bracket is powder coated in an attractive semi matte black finish to increase durability and corrosion resistance. Great for use when fitting horns, lights, device mounts and anything else you need to fabricate. Keep a few of these handy DENALI L brackets in your toolbox to enhance your next installation! 

Learn More

This BATTERY TENDER SAE To USB Charger can be used to charge an iPhone, iPad, iPod, GPS, Camera or any Smartphone or device that be charged via USB. Designed for use on any 12v battery. Learn More

Bike-specific mount kit for installing Denali SoundBomb or Stebel Compact Dual-Tone Air Horn on a BMW F700GS '13-'17 & F800GS '08-'17.  All mounting hardware and instructions included. For easy wiring, check out our Plug-n-Play wiring kit.

Learn More

Mount single or double switches to motorcycles with horizontal perch bolt mounts with the Denali Flat Switch Mount For Horizontal Perch Bolts Learn More

Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

Learn More

Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

Learn More

Just what you need with no frills. Get all the supplies and parts you need to wire your horn to your bike without having to go to the hardware store and still wonder if you have everything. Uses an ATC inline fuse instead of a typical, fragile glass fuse.

 

Learn More

Keeps your smart phone, GPS, MP3 charged while enjoying your ride Learn More

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More

This SW-MOTECH Navi Bag Pro Pouch for Quick-Lock Tankbags & Gadget Mounts is a weather resistant GPS or iPad cradle for all of you tech savvy riders. Designed for superior usability, the device holder is touch sensitive with a transparent, water-resistant screen cover. The Navi Case features a water-resistant zipper with rubber cord management eyelets to keep device wires protected and out of the way. This GPS pouch is beneficial for use in inclement weather as well as in perfectly sunny conditions. The unit includes an integrated sun visor to reduce sun glare for increased visibility.

Learn More

Package contains four 2amp, four 3amp, two 5amp, two 7.5amp, two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.

Learn More

Designed for the unwaivering adventure rider for use in all weather conditions, this SW-MOTECH Navi Pro Case M features a touch sensitive, transparent screen cover with a fully sealed zipper. Reinforced with shape retaining EVA material in both the front and rear, the unit is capable of withstanding a beating from the elements. The Navi Case Pro comes with velcro straps inside of the interior intended to secure your expensive device. Each cradle is engineered with a plastic base prepared with a hole pattern which coordinates with both SW-MOTECH GPS mounts and RAM mounting systems. 

Features

• All weather safe for GPS and Smartphone
• Touch sensitive lid membrane
• Integrated sun shield
• Foam inlay and velcro fastenings
• Splash & water proof zipper
• Zipper garage
• Cable feed-through
• Back and front made of shape retaining EVA
• Base plate compatible to SW-MOTECH GPS mounts and Richter system
• Dimensions: 5.31" x 3.94" x 1.65"
• Window size: 4.53" x 3.15" 

Included

• Water resistant Navi Case Pro M
• Please note: GPS mount needed for installation

Learn More

This DENALI engine guard/crash bar horn mount kit allows fitment of the DENALI SoundBomb Compact Horn to engine guards, crash bars, or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.

This elegant horn mount is intended for installing the SoundBomb Compact Horn, or the compressor of the SoundBomb Split Horn to OEM or aftermarket crash bars commonly found on adventure and dual sport motorcycles. Fitment allows the horn to be positioned inside of the crash bars, ensuring it will be protected in a tip over. The compressor of the SoundBomb Split Horn can also be mounted using this solution, however you will still need to find a separate location to mount the acoustic unit. Add this DENALI horn mount kit with your favorite SoundBomb and be heard!

Learn More

Adapter kit used to attach the motorcycle device cradle that comes with the purchase of a Garmin Zumo 660 or Zumo 665 to any SW-MOTECH Vibration-Damped GPS Holder. Learn More

Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349-1U threaded ball base fits many motorcycles including BMW R1200GS, F650GS twins and F800GS threaded mirror holes.

Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Ideal for use with Doubletake Mirrors.

Learn More

Attach rings directly to battery terminals. Length is 18” and includes fuse holder with 3 amp fuse with weatherproof cap. SAE connector plugs into Battery Tender charger, other chargers, and many electrical accessories.

Learn More

Universal Wide Top Plate Kit with Velcro for Techmount GEN 4 Mounting systems. Learn More

Bike-specific mount kit for installing Denali SoundBomb Split Dual-Tone Air Horn on a Kawasaki Versys 1000LT. All mounting hardware and instructions included. For easy wiring, check out our Plug-n-Play wiring kit.

Learn More

This quick-release bike-specific electronics mount fits the Moto Guzzi Stelvio 1200. Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the BMW R1200GS '08-'09 & R1200GS Adventure '08-'13 and will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. This GPS mount connects your device to the top clamps on the original handlebar of the motorcycle. Learn More

This accessory mount uses existing windscreen mounting points to provide a secure, flat mounting surface with an adjustable viewing angle and height. Designed to move the GPS unit away from the rider to a more direct line of sight. This unit also has the added functionality of a quick release tab that removes the dampened device holder for a cleaner look. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS. Learn More

The RAP-B-379U-M81208 is an M8 x 1.25mm male threaded base post connected to a 1" diameter rubber ball. 

Many mount points available including any M8 x 1.25 threaded mirror hole.

Learn More

The Garmin Tire Pressure Monitor Sensor (TPMS) enables you to monitor your motorcycle’s tire pressure easily and conveniently, as you ride. The system works with up to 4 tires in any configuration (not intended for automotive use). One TPMS sensor is required for each tire (sold separately; metal valve stems only). Learn More

This wiring harness can be used to easily connect two PIAA-brand lamps to your motorcycle. Includes lighted on/off switch. Learn More

GoPro removable LCD Screen keeps your camera small and light but provides the convenience of a touch screen when attached.

Learn More

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms.This device mount will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket.

Learn More

Universal Handlebar Mount for Techmount GEN 4 Mounting systems. Learn More

Top Plate Adapter for mounting Garmin Zumo 660 GPS to Techmount GEN 4 Mounting systems. Learn More

The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. 

Learn More

Bike-specific mount kit for installing Denali SoundBomb or Stebel Compact Dual-Tone Air Horn.  All mounting hardware and instructions included. For easy wiring, check out our Plug-n-Play wiring kit.

Learn More