Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Electronics & Wiring

Electronics & Wiring

Electronics & Wiring

Grid List

per page

Items 31 to 40 of 225 total

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. RAM Mounts B-272 base for M8 (8mm diameter) holes

    RAM Mounts B-272 base for M8 (8mm diameter) holes

    Aluminum small plate base with 9mm-diameter hole and 1'' ball. For use with any M8 (8mm-diameter) or smaller screw mount point. Learn More
    $12.85

  2. RAM Mounts B-202AU 1" Rubber Ball Base with 1/4" x 20 Stud For Camera Tripod Mounts

    RAM Mounts B-202AU 1" Rubber Ball Base with 1/4" x 20 Stud For Camera Tripod Mounts

    The Powder Coated Marine Grade Aluminum Universal Camera Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate with a centered 1/4'' X 20 thread. The plate adds support to the thread, by allowing the camera to rest on the plate, creating a stable connection with the camera.

    Note: The male 1/4'' long, 1/4'' X 20 thread in the middle of the 2.5'' diameter plate will connect to the standard female thread found at the bottom of most still and video cameras. An alternative to this camera mounting system is the Male 1/4'' X 20 Threaded Ball RAM-B-237. Learn More
    $10.86

  3. RAM Mounts KNOB3LU knob lock (optional locking replacement for the original thumbscrew in RAM extension arms)

    RAM Mounts KNOB3LU knob lock (optional locking replacement for the original thumbscrew in RAM extension arms)

    This optional RAM locking knob replaces the original thumb screw in RAM extension arms. In the locked position, turning the locking knob will neither tighten not loosen the extension arm screw, preventing unauthorized removal of the RAM arm or cradle from your motorcycle. It keeps honest people honest - it's not crowbar and buzz-saw safe (of course, neither is your motorcycle). Once you set your mount in the location you need, lock it and hide the key. Learn More
    $23.76

  4. RAM Mounts B-345U reservoir cover center ball

    RAM Mounts B-345U reservoir cover center ball

    The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball CENTERED. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $25.11

  5. Techmount GEN 4 Universal Handlebar Mount for 7/8in (22mm), 1in (25mm), 1-1/8in (28mm) & 1-1/4in (32mm) Handlebars
    $29.95

  6. Techmount Flat Mount Light Switch Mount for PIAA and Denali light switches for Harley-Davidson models

    Techmount Flat Mount Light Switch Mount for PIAA and Denali light switches for Harley-Davidson models

    This accessory bracket provides a convenient mounting point for the on/off switch included with PIAA and Denali auxiliary lighting kits. Fits most Harley-Davidson motorcycles with horizontal switch mount bolts. Learn More
    $9.95

  7. SW-MOTECH Vibration-Damped Quick Release GPS Holder for Suzuki DL1000 '04-'13 & DL650 V-Strom '04-'11

    SW-MOTECH Vibration-Damped Quick Release GPS Holder for Suzuki DL1000 '04-'13 & DL650 V-Strom '04-'11

    This accessory mount uses existing windscreen mounting points to provide a secure, flat mounting surface with an adjustable viewing angle and height. The 8 pre-drilled M6 mounting holes allow easy direct attachment of your motorcycle accessories. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS. Learn More
    $89.99

  8. RAM Mounts round antenna adapter plate with AMPS hole pattern (for Garmin XM radio receivers)

    RAM Mounts round antenna adapter plate with AMPS hole pattern (for Garmin XM radio receivers)

    Designed to hold an XM or GPS antenna magnetically or via screw down attachment, the RAM-344U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units and RAM GPS cradles. Mount your satellite radio receiver or GPS in a RAM cradle and antenna all on a single platform for both ease of installation and use. Learn More
    $6.29

  9. SW-MOTECH Vibration-Damped Quick Release GPS Holder Yamaha XT1200Z Super Tenere, '10-'14

    SW-MOTECH Vibration-Damped Quick Release GPS Holder Yamaha XT1200Z Super Tenere, '10-'14

    This accessory mount uses existing windscreen mounting points to provide a secure, flat mounting surface with an adjustable viewing angle and height. Designed to move the GPS unit away from the rider to a more direct line of sight. This unit also has the added functionality of a quick release tab that removes the dampened device holder for a cleaner look. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS. Learn More
    $77.99

  10. RAM Mounts HOL-GA23U mount for Garmin Nuvi 600, 610, 650, 660, 670, & 680

    RAM Mounts HOL-GA23U mount for Garmin Nuvi 600, 610, 650, 660, 670, & 680

    Includes RAM-HOL-GA23U mount for Garmin Nuvi 600, 610, 650, 660, 670, & 680 Learn More
    $10.91

Grid List

per page

Items 31 to 40 of 225 total

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6